NUVO Lighting 65-848 LED Area Light Type III, 300W, Bronze Finish, 4000K, 120-277V

The 65-848 ships with a 2-3/8 inch slip-fitter mount, so it slides over a 2-3/8 inch OD horizontal tenon or pole arm and clamps down. If your pole has a square drill-pattern arm plate instead of a round tenon, you need an adapter or a different mount style; the slip-fitter is what comes in the box. Fixture weight is 12.35 lbs, so the pole and arm need to carry that plus wind load.

Type III throws light forward and to the sides in an asymmetric pattern, which is what you want for perimeter mounting along a drive lane or at the edge of a parking lot, with the fixture aimed inward. If you are lighting from a pole in the middle of a lot with rows on both sides, a Type V (square or round symmetric) pattern covers it better. The 65-848 is the Type III version and puts out 39,815 lumens at 300W.

It accepts 120V through 277V, so 120, 208, 240 and 277 all work off the same fixture with no reconfiguration. 480V will not work. For a 480V site you need a fixture with a 347-480V driver or a step-down transformer.

Yes, it is a wet location rated outdoor fixture, cULus certified, with a die-cast aluminum housing. That covers pole-top, arm-mount and open-sky installs where the fixture takes direct rain and snow.

The fixture is dimmable, so it can be wired to a 0-10V control or a dimming scheduler for late-night setback. Colour temperature is fixed at 4000K, not field selectable, so you choose the CCT by part number rather than by a switch on the fixture.

At 39,815 lumens delivered, the 65-848 covers the output range of a 1000W metal halide or high pressure sodium shoebox while drawing 300W. Because HID lumens degrade heavily over life and LED delivered lumens are measured at the fixture, run a quick point-by-point if you are matching an existing light level spec rather than assuming a one-for-one swap.

The LED array is integrated, so there is no lamp or socket to change. Rated life is 50,000 hours, and service means replacing the fixture or the driver, not relamping. That matters for MRO stocking: you carry spare fixtures, not spare lamps.

4000K is a neutral white, the usual choice for parking and site lighting, and this fixture is fixed at that temperature with a CRI of 80. If your existing poles are 5000K the difference will be visible side by side, so standardize on one CCT across a lot rather than mixing. Finish is bronze, which is the common site-pole colour.

The housing measures 30.28 inches long, 12.39 inches wide and 3.11 inches high, and weighs 12.35 lbs. The low 3.11 inch profile keeps the wind load down, which is worth checking against your pole EPA rating if you are hanging two or four of these on one pole.

Yes. Lead is listed as the Prop 65 chemical for this fixture. It is RoHS compliant. If you are buying for a California public agency or school, note the lead disclosure in your submittal package.