NUVO Lighting 65-849-5 LED Area Light Type V, 300W, Bronze Finish, 5000K, 120-277V

It ships with a 2-3/8 inch slip-fitter mount, so it slides over a 2-3/8 inch outside-diameter tenon or horizontal arm and clamps down. If your pole has a square drill pattern for a direct arm mount instead of a tenon, this fixture won't bolt to it without an adapter. Fixture weight is 12.35 lbs, so a standard tenon handles it fine.

Type V throws light in a symmetric circular/square pattern all the way around the pole, so it suits open parking lot interiors, pole positions in the middle of a lot, courtyards, and storage yards where you want even coverage on all sides. If the pole sits along a property line or at the edge of a lot, a Type III or forward-throw distribution is the better pick because Type V will spill light onto the neighbor. The 65-849-5 is a Type V fixture only.

The driver is universal 120V-277V, so 120, 208, 240, and 277 all work off the same fixture with no reconfiguration. 480V will not work. If your site feeds area lighting at 480V, you need either a step-down transformer or a 347-480V rated fixture instead.

Yes, it's a wet location rated outdoor fixture, so direct rain exposure on a pole top or an unprotected arm is within rating. Housing is die-cast aluminum, and it's cULus certified.

At 300W drawing 38,988 lumens, it's in the range facilities use to swap out 1000W metal halide or high pressure sodium area lights, where delivered lumens drop sharply as the lamp ages. The LED is integrated, so there is no lamp to relamp, and it's rated for 50,000 hours.

The fixture is dimmable, so it can be tied into a 0-10V control scheme for scheduled or occupancy-based level reduction in a lot. The color temperature is fixed at 5000K, not field selectable, so it can't be tuned down to 4000K after install.

This fixture is 5000K with a CRI of 80, a cool white that reads close to daylight and is the common spec for parking and security lighting. If your existing poles are 4000K, the difference will be visible side by side, and since the color temperature is fixed here there is no way to dial it back in the field.

No. The LED array is integrated into the fixture and the driver is onboard, so nothing additional is needed to light it. The 2-3/8 inch slip-fitter is included as well. What you still supply is the pole, tenon or arm, and any photocell or control device.

The housing measures 30.28 inches long, 12.39 inches wide and 3.11 inches high. That slim 3.11 inch profile keeps the wind load and visual bulk down, but plan the arm length so the 30.28 inch dimension clears the pole and any adjacent fixture on a twin-head configuration.

RoHS compliant, yes. It also carries a California Prop 65 notice for lead, which matters for submittals on California public work and for the documentation institutional buyers keep on file.

Bronze is the only finish offered on this 300W Type V model. Bronze is the standard pole-lighting color on most commercial sites, so it typically blends with existing poles without repainting.