NUVO Lighting 65-885 LED Low Profile Wall Pack, Wattage 70/85/100W and CCT 3K/4K/5K Selectable, Photocell, Dimmable, Bronze Finish

One fixture covers both. The 65-885 LED wall pack accepts 120V through 277V, so the same unit works on 120V single-phase in a small building and on 277V off a 480/277 panel in a commercial facility. That makes it practical to standardize one part number across a mixed-voltage portfolio.

Both are selectable on the fixture itself. Wattage is switchable between 70W, 85W and 100W, and color temperature between 3000K, 4000K and 5000K. Light output tracks the wattage setting, ranging from 8,817 to 12,941 lumens. Practically, that means one stocked unit can be dialed to match warmer 3000K entries on one building and cooler 5000K service areas on another without ordering different SKUs.

A photocell is built in, so the 65-885 switches on at dusk and off at dawn with no external control or added photo-eye. It is also dimmable if you are tying it into a control system. For a property manager replacing an old HID pack on a time clock, this removes the clock from the job.

Wet location rated and intended for outdoor use, so it can go on an exposed exterior wall taking direct rain, not just under a soffit. The fixture carries a cETLus safety listing for both the US and Canada.

The housing measures 15.55 inches by 9.76 inches and weighs 9.26 lbs. That is light enough for a standard recessed junction box mount on masonry or stud wall with proper anchors, but check that the existing wall pack's mounting footprint is covered, since a 15.55 inch wide low profile body may not conceal the same patch as an older HID box.

No. The LED array is integrated, with no replaceable lamp or socket, so there is no relamping over its life. It is rated for an average 50,000 hours, and at end of life the fixture is replaced rather than re-lamped. For MRO planning that trades a lamp line item for a fixture replacement cycle.

Output is the thing to match. At its top setting the 65-885 puts out 12,941 lumens at 100W, and at the low setting 8,817 lumens at 70W. Compare those against the delivered lumens of the HID fixture you are removing rather than the nameplate watts, since HID loses substantial output as the lamp ages. Also confirm your existing supply is within 120V to 277V, which this fixture covers, and that the mounting box lines up with the 15.55 by 9.76 inch body.

The housing is die-cast aluminum in a bronze finish, which is the standard construction for exterior wall packs on loading docks, stairwells and parking walls. Aluminum sheds heat from the integrated LED and does not rust like steel. The fixture is also RoHS compliant.

Yes for exterior security and circulation lighting. The 65-885 delivers 80 CRI, which is the normal spec for parking areas, docks and building perimeters where color accuracy matters less than uniformity and output. If you need color rendering for retail display or task work, that is an interior application and a different fixture type.

Yes. Lead is identified as the Prop 65 listed chemical for the 65-885. If you are specifying for a California facility, that warning needs to carry through to your submittal and any posted signage requirements for the site.

Bronze is the finish offered on the 65-885, which is the common match for dark exterior trim, brick and standard commercial wall pack installations. If your building standard is white or black housings, this one will not match.