NUVO Lighting 65-960 60W, Hi-Pro Shop Light with Plug, 8in Dia., 3000K, Black Finish, 120V

The 65-960 Hi-Pro shop light carries a Wet location rating, so moisture exposure is not a problem. NUVO still classes the fixture as an indoor product, so the practical fit is covered wet or damp interior space: wash bays, garages, coolers, unconditioned warehouse. It is cULus safety listed.

It plugs in. The 65-960 ships with a cord and plug on a 72 inch lead, running on standard 120V, so no electrician and no junction box is needed. Hang it from the included locking snap hook and reach a receptacle within six feet of the fixture, or add a cord drop. That is the whole install.

No. The 65-960 is non-dimmable. Put it on a dimmer and you risk flicker, buzz, or driver failure. Switch it on a plain relay, a plug-in timer, or an on/off occupancy sensor. If the job spec calls for dimming, this is the wrong fixture and you need a dimmable LED high bay instead.

Fixed. The 65-960 is a single 3000K warm white unit with no CCT selector switch, so every fixture you order matches the next one. If you are matching an existing bay running 4000K or 5000K, this one will read noticeably warmer and yellower next to them. Color rendering is 80 CRI.

There is no bulb to replace. The LED array is integrated into the fixture, with no socket or lamp base, so the whole unit is the consumable. Rated life is 30,000 hours. Run 10 hours a day and that is over eight years before you are shopping again, which is the trade for not being able to relamp it.

The round Hi-Pro throws light down and out from one point, so it suits a single work zone, a lift bay, a stairwell, or a spot where you want one hanging point and a plug. A linear strip spreads a band of light and is the better call over a workbench, a parts counter, or a long aisle where you want even coverage end to end. The 65-960 also hangs on an included snap hook rather than needing surface mounting or chain kits, which makes it the faster answer in a rental or temporary setup.

The body is die-cast aluminum, not molded plastic. That matters twice over in a shop: aluminum sheds driver heat, which is what preserves the 30,000 hour rating, and it survives the knocks a hanging fixture takes in a bay. Pair that with the wet location rating and it takes hosing down.

Yes, lead is the listed Prop 65 chemical for the 65-960, so a warning applies on shipments into California. Separately the fixture is RoHS compliant, which is the one procurement departments usually want on the submittal alongside the cULus listing.

Black is the only finish on the 65-960. Order it by manufacturer part number 65-960 and the black die-cast body is what arrives, so there is no finish suffix to specify and nothing to get wrong on a repeat order for a second building.