NUVO Lighting SF76-269 2 Light, 12in Flush with Round Sunburst Glass, White Finsh

The SF76-269 is a 12 inch diameter ceiling fixture with a 4.75 inch height, so it sits close to the ceiling. That profile is what you want in corridors, closets, stairwells, laundry rooms, and any low-ceiling unit where a pendant or semi-flush would be in the way. Mounting is ceiling only, so it is not a wall sconce.

Two A19 lamps with a medium E26 base, 60W maximum each, on 120V line voltage. Bulbs are not in the box, so order lamps separately. Any standard A19 in E26 works, incandescent or an LED replacement, as long as you stay at or under 60W equivalent draw on the fixture rating.

Dimming on the SF76-269 depends entirely on the lamp you install, not the fixture. There is no driver or integrated LED here, it is a straight incandescent-technology socket fixture, so the two E26 lamps are what a wall dimmer sees. Standard incandescent A19s dim on any common incandescent dimmer. If you drop in LED A19s, they have to be marked dimmable and matched to the dimmer type, or you will get flicker and drop-out at the low end.

Bathroom yes, covered porch no. The SF76-269 carries a damp location rating and is classified indoor, so it is fine over a bath, in a laundry, or in a basement where humidity is present but water does not hit the fixture. It is not wet-rated and not an exterior fixture, so keep it out of open soffits, shower enclosures with direct spray, and anywhere it can take rain or hose-down.

The SF76-269 is cULus safety listed, which covers both US and Canadian installation, and it is RoHS compliant. That listing is what an inspector and most institutional specs are looking for on a general-purpose 120V ceiling fixture. Note the California Prop 65 disclosure for lead on this fixture, which matters if your organization tracks Prop 65 on submittals.

Two sockets at 60W each gives you 120W of capacity on a single 12 inch fixture, which is enough for a hallway, a walk-in closet, a small bedroom, or an entry. For a larger room, plan on more than one. Because the sockets are standard E26 medium base, you can lift the light output well past what 120W of incandescent gives by lamping it with LED A19s at the same or lower draw.

At 2.04 lbs the SF76-269 is a light fixture, well under the 50 lb limit a standard listed ceiling outlet box carries for luminaires, so no bracing or fan-rated box is needed. The body is steel, which is what the mounting strap screws bear on. Handy on retrofit work where you are reusing existing old-work boxes across a building.

White only. The SF76-269 is built in a single configuration, a white finish with round sunburst glass, in a traditional style. There is no bronze, nickel, or brass option under this model number, so if the rest of the building is on a darker metal finish you will be matching a different NUVO model rather than a variant of this one.

Yes. The SF76-269 is a single-configuration fixture, part number SF76/269, so every unit ships identical: 12 inch white body, round sunburst glass, two E26 sockets. There is no finish, size, or lamping option to get wrong on a reorder, which is what makes it workable as a fleet standard across units and turns. Order lamps separately since none are packed with the fixture.

Yes, and it is the usual path on this fixture. The SF76-269 has no integrated LED or driver, just two medium E26 sockets rated 60W each at 120V, so swapping to LED A19 lamps is a bulb change, not a fixture change. Colour temperature is whatever lamp you buy, since the fixture itself has no selectable CCT. If the circuit is dimmed, buy dimmable LEDs and check them against the existing dimmer.