NUVO Lighting SF77-190 6 Light, 36in, Vanity, Strip, Polished Brass Finish

The SF77-190 is a 36 inch wide strip, 4.75 inches high, and projects only 2 inches off the wall. Over a 36 inch mirror it sits flush edge to edge, so if you want overhang past the mirror you need a wider fixture. The shallow 2 inch extension keeps it clear of a medicine cabinet door swing.

Bulbs are not included. You need six medium base (E26) lamps, and the fixture is built around Type G globe shape bulbs, which is the look for an exposed strip like this. Maximum is 100W per the fixture rating, and the strip runs on 120V. Dimming depends entirely on the lamp you install, so pick dimmable globes if the room is on a dimmer.

Yes, the SF77-190 is listed ADA compliant, which is consistent with its 2 inch projection from the wall. It is cULus safety listed and damp location rated, so it is acceptable over a sink or in a bathroom where it sees humidity, but it is an indoor fixture only, not wet location.

No. It is rated for indoor use and damp locations only, so a covered exterior porch or a shower enclosure that can see direct water needs a wet location rated fixture instead. Indoor bathrooms, powder rooms, and dressing areas are where this one belongs.

It is a wall mount fixture, mounted horizontally over the mirror on a standard wall box. The whole strip weighs only 4.13 lbs with the steel body, so no blocking or extra support is needed beyond a properly secured box. Wiring is 120V line voltage.

Yes, as long as the LED lamps are medium E26 base and you stay within the 100W fixture rating, which any LED globe will. The fixture itself is built as an incandescent strip with no integrated LED board and no selectable color temperature, so whatever CCT you want comes from the lamp choice. Confirm the lamp is dimmable if the circuit has a dimmer, since dimming here is lamp dependent.

The fixture is rated 100W at 120V. With six medium base sockets, size your branch circuit and dimmer against that fixture rating rather than multiplying six bulbs by 100W. If you are standardizing a multi-family bathroom package, LED globes drop the actual draw well below the rating.

Polished brass is the only finish this model is offered in, over a steel body. It is a traditional style strip, so it reads with polished brass faucets and towel bars rather than with brushed or matte finishes. If a job needs a different finish, you are picking a different model number, not an option on this one.

Yes. Lead is identified as a California Prop 65 chemical for this fixture, which matters for institutional and government procurement paperwork. The fixture is also RoHS compliant.