NUVO Lighting TK347 3 Light, MR16, Square Track Kit, 4 foot Track, LineVage, Brushed Nickel

The TK347 kit ships with one TR127 4-foot track section, one TP155 floating power feed, three TH314 track heads, and all required mounting hardware. The only thing you add is lamps: bulbs are not included, and the heads take GU10 base MR16 lamps rated to 50W max per head. Wire it to a 120V circuit.

No. The TK347 is rated for indoor, dry locations only, so it is out for bathrooms with shower exposure, covered exterior areas, and any damp or wet space. Use a damp- or wet-rated fixture there instead. It is a ceiling mount kit for conditioned interior spaces.

Extension is 5.88 inches from the ceiling, with each head measuring 2.38 by 2.25 by 2.25 inches. That drop matters in a low-ceiling corridor or over a counter where head clearance is tight. Total kit weight is 4.9 lbs across the 4-foot track run.

The TK347 carries a cETLus safety listing, which covers both US and Canadian requirements, and is flagged ADA compliant. It is also RoHS compliant. Note the CA Prop 65 disclosure for lead if you are supplying a California project.

No. The TK347 includes a TP155 floating power feed, which means it can be positioned along the track run rather than being fixed to one end. That lets you land the track where you want it architecturally and still pick up an existing ceiling junction box that isn't at the end of the run. The install sheet is published by the manufacturer at the Instructions link on the spec data.

The kit is built around NUVO's LineVage single-circuit 120V track: one TR127 4-foot section with three TH314 heads. To grow the run you add matching LineVage track sections and TH314 style heads from the same system. Watch your branch circuit load, each head is rated to 50W max, so three heads is 150W on the supplied run.

The kit is a halogen-technology fixture with GU10 sockets rated to 50W, so any GU10 base MR16 lamp that fits within that wattage will seat and run, including GU10 LED retrofits. You won't get selectable color temperature from the fixture, the kit has no CCT selection, so whatever CCT you want comes from the lamp you buy.

Brushed nickel is the only finish this kit is built in, with glass and metal construction and a transitional styling that reads neutral next to most brushed nickel trim and fixtures. If you're standardizing a building on one finish, the single-finish catalog number keeps reorders simple, there's no finish suffix to get wrong.