NUVO Lighting TP152 Live End With Canopy, White Finish

The TP152 is the feed point for a single circuit track run. It brings power into the track at the end of the run and covers the outlet box with a canopy, so the electrical connection is made and concealed at one end rather than mid-run. If the supply box sits somewhere in the middle of your track layout, an end feed is the wrong part for that opening; you want a floating or center feed connector instead.

No. The TP152 is a single circuit feed. On a two circuit or multi-circuit track it will not carry the second circuit, and the conductor arrangement in the track head is different, so you need the feed made for that track type.

Dry locations only. The TP152 carries a dry location rating, which rules out covered exterior soffits, canopies, parking structures, and any spot subject to condensation or splash. For a covered patio or a wet area over a tub, specify a fixture and feed rated damp or wet for that space.

Figure on a 5 inch extension with a 4 inch width and 3 inch height on the canopy body. That extension is what a designer or contractor needs when the track runs close to a soffit, beam, or a sloped section of ceiling, since the feed sits proud of the mounting surface rather than flush.

White is the only finish the TP152 is made in. If your existing run is black or nickel track, the feed has to come from that finish family of the manufacturer's track components, since a white canopy on a dark ceiling run is the first thing anyone notices.

Plastic, in a white finish. That matters if you are matching a run of white painted track in a leased office or apartment turnover, where the canopy needs to disappear against the ceiling. Where a job spec calls for a metal canopy on exposed track, this is not the part to submit.

Yes, lead is the listed Prop 65 chemical on the TP152. Institutional and government buyers who track Prop 65 disclosures on submittals should record it against this part number.