nVent CADDY Armour Spring Stee...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.81
nVent CADDY Armour Spring Steel EMT Push-In Conduit-to-Flange Clip

nVent CADDY Armour Spring Steel EMT Push-In Conduit-to-Flange Clip

(No reviews yet) Write a Review

Model: 12P24

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.81
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY 12P24 Armour Spring Steel EMT Push-In Conduit-to-Flange Clip

The nVent CADDY 12P24 is an Armour spring steel Type EM-P push-in conduit-to-flange clip that attaches EMT or rigid conduit directly to a flange edge without screws, straps, or additional hardware. Available in 1/2-Inch, 3/4-Inch, and 1-Inch trade sizes, this spring-tempered steel clip pushes into place over the flange edge and grips it under continuous spring tension, creating a fast, secure mechanical connection. The push-in design lets electricians and contractors route EMT or rigid conduit along structural flanges in a fraction of the time required by drilled or strapped mounting methods. Backed by nVent CADDY's reputation for job-site-ready fastening hardware, the 12P24 series is built to hold up under the repeated handling and vibration common to commercial and industrial electrical work.

Key Features

  • Trade Size Range: Available in 1/2-Inch, 3/4-Inch, and 1-Inch sizes, matching common EMT and rigid conduit raceway sizing on commercial and industrial jobs.
  • Durable Construction: Armour spring steel construction maintains its spring tension and holding force through repeated installation and job-site handling.
  • Push-In Attachment: The Type EM-P push-in design clips directly onto a flange edge, eliminating the drilling, screws, or straps a conventional clamp would require.
  • Conduit-to-Flange Mounting: Purpose-built as a conduit-to-flange clip, giving installers a dedicated, single-piece solution for securing conduit to structural steel flanges.
  • Conduit Compatibility: Accepts both EMT and rigid conduit across its available trade sizes, giving installers flexibility across common raceway types.
  • Tool-Free Installation: Push-in mounting speeds up repetitive conduit runs, reducing labor time versus drilled or bolted clip alternatives.
  • Compact, Single-Piece Design: The one-piece spring steel body keeps hardware counts low and simplifies inventory for electrical contractors.

Technical Specifications

  • Product Type: Conduit Clip
  • Product Size: 1/2"

Typical Applications

  • Conduit and Raceway Systems
  • Commercial and Industrial Electrical Installations
  • EMT and Rigid Conduit Mounting to Structural Flanges
  • Renovation and New Construction Electrical Work
  • Overhead and Structural Conduit Routing

Why nVent CADDY?

nVent CADDY manufactures the 12P24 series from Armour spring steel to deliver consistent holding strength and long service life in demanding job-site conditions, across the full 1/2-Inch to 1-Inch trade size range. The Type EM-P push-in design reflects nVent CADDY's focus on practical, labor-saving fastening hardware that helps electrical contractors install EMT and rigid conduit quickly while maintaining a firm, mechanical connection to the flange. For crews who need dependable conduit support hardware they can trust on repeat use, the 12P24 delivers the fast installation and durable construction nVent CADDY is known for.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

list_batch:
CDY-20260915
Product Type:
Conduit Clip
Connection Type:
Push-In
Series:
EM-P
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Hangers, Straps & Supports
Product Material:
Spring Steel

nVent CADDY 12P24 – Frequently Asked Questions

1) Does the nVent CADDY 12P24 clip need screws or a drilled hole to mount conduit to steel?
No drilling and no fasteners. The 12P24 is a Type EM-P push-in clip that pushes over a flange edge and holds under continuous spring tension, so there are no screws, straps, or anchors to buy or install. That is the whole point of the design: repetitive conduit runs along structural steel go up much faster than with drilled or bolted clips.
2) What conduit trade sizes does the CADDY EM-P conduit-to-flange clip cover?
Two orderable trade sizes: 3/4 inch, part number 12P24, and 1 inch, part number 16P24. The clip is sized to the conduit, so order one clip per conduit size on the run rather than expecting one clip to cover a mixed bundle.
3) Will the 12P24 clip hold rigid conduit, or is it EMT only?
Both. The clip accepts EMT and rigid conduit across its trade sizes, so an electrician running a mix of raceway types on the same structure can stay with one clip family and just match the trade size.
4) When should I use a push-in flange clip instead of a conduit strap or a beam clamp?
Use the EM-P push-in clip when you have a flange edge to grab, such as a bar joist, beam, or structural steel flange, and you are running EMT or rigid along it. It is a single piece that clips on with no tools. If you have no flange edge, such as running along a concrete deck, a wall, or unistrut, this is the wrong part and you need a strap or clamp that fastens to the surface instead.
5) What is the CADDY EM-P clip made of, and will it keep its grip after being pulled off and reinstalled?
Armour spring steel, spring tempered. That is what lets it hold clamping force through repeated handling and reinstallation, and it is why the clip stays put under the vibration typical of commercial and industrial electrical work. A stamped mild steel strap loses tension once sprung; this one is built to return to shape.
6) How many pieces are involved in installing one CADDY 12P24 clip?
One. The clip is a single-piece spring steel body, so there is no separate nut, bolt, or saddle to keep track of on the lift. For a contractor stocking a truck that means one part number per conduit size instead of a clip plus hardware.
7) Is the 12P24 a conduit hanger or a clip that fastens the pipe to steel?
It fastens the pipe to steel. The 12P24 is a conduit clip, not a rod-hung hanger or a threaded support, and it is used for electrical raceway work. It attaches the conduit directly to a structural flange edge rather than suspending it.
How fast can I get the nVent CADDY 12P24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY 12P24 come with a warranty?
Absolutely. The nVent CADDY 12P24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY 12P24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY 12P24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!