nVent CADDY 32PLUSF2 Cadweld® Plus Copper Oxide and Aluminum Exothermic Weld Metal, 115 g F20 Cartridge

nVent CADDY 32PLUSF2 Cadweld® Plus Copper Oxide and Aluminum Exothermic Weld Metal, 115 g F20 Cartridge

The nVent CADDY 32PLUSF2 Cadweld® Plus weld metal is a copper oxide and aluminum exothermic welding charge supplied as a pre-measured 115 g cartridge sized for F20 mold configurations, formulated to produce a permanent, low-resistance molecular bond between copper and steel conductors in electrical grounding and bonding systems. Each factory-measured 115 g F20 charge ships with a protective cap and is available in Gray, Orange, and White cartridge cap colors, helping installers achieve consistent, repeatable exothermic welds without hand-measuring loose powder on the job site. The nVent CADDY Cadweld® Plus system reflects a long history of exothermic welding technology used across utility, industrial, and commercial grounding installations.

Key Features

• Weld Metal Composition: Formulated from copper oxide and aluminum to produce a reliable, high-temperature exothermic reaction during the welding process.
• 115 g Charge Size: Supplied as a pre-measured 115 gram weld metal charge, helping ensure consistent, repeatable welds from one connection to the next.
• F20 Mold Sizing: Sized specifically for use with F20 mold configurations within the Cadweld® Plus exothermic welding system.
• Cap Color Options: Available in Gray, Orange, and White cartridge cap colors.
• Included Protective Cap: Ships with a cap that helps protect the weld metal charge from moisture and contamination prior to use.
• Cadweld® Plus System Compatibility: Designed as part of the nVent CADDY Cadweld® Plus exothermic welding product line used to form permanent electrical grounding connections.
• Single-Use Charge: Each 115 g charge is intended for a single exothermic weld, supporting clean, controlled material handling on the job site.

Technical Specifications

• Series: Cadweld Plus
• Configuration: F20

Typical Applications

• Electrical Grounding and Bonding Connections
• Exothermic Welding of Copper and Steel Conductors
• Grounding Electrode and Ground Rod Connections
• Utility, Industrial, and Commercial Grounding Systems
• Substation and Data Center Grounding Grids

Why nVent CADDY?

nVent CADDY formulates its Cadweld® Plus weld metal from copper oxide and aluminum to deliver a consistent, high-quality exothermic reaction charge after charge. The pre-measured 115 g F20 charge, supplied with a protective cap and available in Gray, Orange, and White cap colors, helps installers maintain accurate, repeatable welds instead of relying on loose, hand-measured powder. For contractors who need permanent, code-compliant grounding connections that won't loosen or corrode over time, the nVent CADDY Cadweld® Plus system offers a trusted, purpose-built weld metal solution.