nVent CADDY 4Z3412P 3/4" EMT C...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$383.94
nVent CADDY 4Z3412P 3/4" EMT Conduit Clip, Pack of 100

nVent CADDY 4Z3412P 3/4" EMT Conduit Clip, Pack of 100

(No reviews yet) Write a Review

Model: 4Z3412P

In Stock (leaves warehouse same day if ordered before 3pm ET)

$383.94
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY 4Z3412P 3/4" EMT Conduit Clip

The nVent CADDY 4Z3412P is a 3/4" EMT Conduit Clip engineered to secure electrical metallic tubing (EMT) conduit runs to structural framing in commercial and industrial installations. Sized specifically for 3/4" trade size EMT, this clip provides a fast, dependable attachment point along a conduit run so the raceway stays properly supported from the rough-in stage through final inspection. It is part of the broader nVent CADDY line of conduit fastening products used by electrical contractors, maintenance crews, and facility engineers who need a straightforward way to route and secure EMT conduit on the job site.

Key Features

  • Trade Size: Sized for 3/4" EMT conduit for a precise, secure fit along the conduit run, helping keep the raceway aligned and properly supported.
  • Clip-Style Design: Purpose-built EMT clip configuration for mounting conduit directly to structural surfaces such as steel framing, studs, and other building members.
  • Streamlined Installation: Compact clip profile supports fast placement along conduit runs, including in tight spaces where a full strap-and-fastener assembly is impractical or unnecessary.
  • nVent CADDY Engineering: Part of the nVent CADDY conduit support product line relied on by electrical professionals for consistent, repeatable jobsite performance across commercial and industrial projects.
  • Application-Specific Sizing: Matched to 3/4" EMT so installers can specify the correct clip the first time, reducing job-site guesswork and callbacks for mismatched hardware.
  • Labeled Identification: Carries the manufacturer model designation 4Z3412P, corresponding to the 3/4" EMT clip variant in the nVent CADDY catalog for easy reordering.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Commercial and Industrial Electrical Installations
  • EMT Conduit Support and Routing Along Structural Members
  • Structural Mounting of Conduit Runs in Ceilings, Walls, and Corridors
  • New Construction and Retrofit Electrical Work
  • General Contractor and Electrician Rough-In Support Work

Why nVent CADDY?

nVent CADDY is a recognized name in conduit support and fastening solutions for electrical professionals, with a product line built around solving practical, everyday installation challenges. The 4Z3412P EMT Clip reflects that focus, offering a simple, purpose-built way to secure 3/4" EMT conduit in the field without unnecessary hardware or complexity. Choose nVent CADDY for dependable, install-ready conduit support hardware backed by a manufacturer trusted across the electrical trade for practical, field-tested fastening solutions.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

list_batch:
CDY-20260915
Product Type:
Conduit Clip
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Hangers, Straps & Supports
Product Size:
3/4"
Pack size (unit):
100

nVent CADDY 4Z3412P – Frequently Asked Questions

1) Do I need screws or anchors to install a 3/4 inch EMT conduit clip like the 4Z3412P?
The 4Z3412P is a clip-style support, which is the point of it: it attaches conduit directly to structural surfaces such as steel framing, studs and other building members without the full strap-and-fastener assembly. If your attachment surface calls for separate fasteners or anchors, those are sourced separately since they depend on the substrate, not on the clip.
2) How many clips come in the nVent CADDY 4Z3412P pack?
One pack of the 4Z3412P contains 100 clips. That is the ordering unit, so a run needing supports every few feet across a floor is typically covered by one or two packs rather than counting out singles.
3) Should I use an EMT clip or a two-hole strap to secure 3/4 inch conduit?
A clip like the 4Z3412P is the faster choice along the length of a run, especially in tight spaces where a strap plus separate fasteners is impractical. A two-hole strap is what you want where you need a positive screwed-down connection to masonry or drywall backing, or where a specification calls out a strapped attachment. For routine rough-in along ceilings, walls and corridors, the clip keeps the raceway aligned with less hardware.
4) Can I use these CADDY clips for both new construction and retrofit electrical work?
Both. The 4Z3412P is used for rough-in on new commercial and industrial work and for retrofit runs, since it supports conduit at structural members from rough-in through final inspection without adding hardware to an existing assembly.
How fast can I get the nVent CADDY 4Z3412P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY 4Z3412P come with a warranty?
Absolutely. The nVent CADDY 4Z3412P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY 4Z3412P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY 4Z3412P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!