nVent CADDY WMX6SF Steel Cable...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.55
nVent CADDY WMX6SF Steel Cable Hanger with Shot-Fire Bracket, 1-3/4-Inch

nVent CADDY WMX6SF Steel Cable Hanger with Shot-Fire Bracket, 1-3/4-Inch

(No reviews yet) Write a Review

Model: WMX6SF

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.55
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

nVent CADDY WMX6SF Steel Cable Hanger with Shot-Fire Bracket, 1-3/4-Inch

The nVent CADDY WMX6SF Steel Cable Hanger with Shot-Fire Bracket is a 1-3/4-Inch steel cable support built for fast, secure overhead cable routing in commercial and industrial electrical installations. Constructed from durable steel, this cable hanger integrates a shot-fire bracket that allows direct attachment to structural steel or concrete, helping electricians and contractors speed up cable support installation without sacrificing holding strength. As part of the nVent CADDY cable support line (formerly branded Erico), model WMX6SF is engineered to keep cable runs organized, supported, and code-friendly above ceilings, in plenum spaces, and along structural members. This 1-3/4-Inch hanger is a practical choice wherever overhead cable bundles need a dependable, steel-built support point.

Key Features

  • Trade Size: Sized at 1-3/4-Inch to accommodate overhead cable bundles in commercial and industrial runs.
  • Durable Steel Construction: Fabricated from steel for long-term strength, rigidity, and reliable load support.
  • Shot-Fire Bracket: Integrated shot-fire bracket allows direct-fastening attachment to structural steel or concrete, reducing installation time.
  • Model WMX6SF: Part of the nVent CADDY cable hanger lineup (formerly Erico), built for consistent, job-tested cable support performance.
  • Overhead Cable Routing: Designed to hold and route cable runs cleanly above ceilings, through plenum spaces, and along structural steel members.
  • Fast Installation: The shot-fire mounting method is intended to streamline attachment compared to drilled or bolted alternatives, saving labor time on the job site.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Commercial and Industrial Cable Support Systems
  • Overhead Cable Routing and Management
  • Structural Steel and Concrete Attachment Points
  • Data, Communications, and Electrical Cable Runs
  • New Construction and Retrofit Electrical Installations

Why nVent CADDY?

nVent CADDY, formerly known as Erico, has long been a trusted name in cable support and fastening solutions for the electrical and construction trades. The WMX6SF steel cable hanger combines rugged steel construction with a shot-fire bracket for a fast, secure mounting solution that professionals can rely on for consistent overhead cable support. Choosing nVent CADDY means choosing a cable support product built for the demands of commercial and industrial job sites.

Manufacturer Resources

nVent CADDY Full Catalog

Product Specs

list_batch:
CDY-20260915
Product Type:
Cable Hanger
Series:
WMX6SF
Department:
Electrical
Product Group:
Hangers, Supports & Fasteners
Product Subgroup:
Cable Support Systems
Product Material:
Steel
Product Size:
1-3/4"

nVent CADDY WMX6SF – Frequently Asked Questions

1) What size cable bundle does the nVent CADDY WMX6SF hanger hold?
The WMX6SF is a 1-3/4 inch cable hanger, so it is sized for overhead bundles up to that trade size. If your bundle is larger, you need a bigger hanger in the CADDY cable support line rather than forcing this one.
2) How does the WMX6SF attach to the structure, and do I need anchors or drilling?
It comes with an integrated shot-fire bracket, so it fastens directly to structural steel or concrete with a powder-actuated tool. No drilling, no anchors, no bolting. You do need the powder-actuated fastener and tool on site, since the hanger is the support point, not the fastener.
3) Is the nVent CADDY WMX6SF the same thing as an Erico cable hanger?
Yes. CADDY was formerly branded Erico, and the WMX6SF is part of that same cable support line under the nVent CADDY name. If a drawing or old order calls out an Erico CADDY hanger, the current part number is WMX6SF.
4) Can I use this hanger for low-voltage data and comm cable above a ceiling?
Yes, that is one of its intended uses. The WMX6SF supports data, communications, and electrical cable runs above ceilings, in plenum spaces, and along structural members. It is a cable hanger, not a conduit strap, so it is meant for bundled cable rather than rigid raceway.
5) Shot-fire hanger or a threaded rod and clamp for overhead cable support?
Shot-fire, like the WMX6SF, is the faster route when you are attaching straight to a steel beam or a concrete deck and you want a fixed support point with no layout drilling. Threaded rod with a beam clamp makes more sense when you need to drop the cable well below the structure or adjust height after the fact. The WMX6SF mounts tight to the member.
6) How many part numbers do I order for the WMX6SF, or is there a version to pick?
There is a single configuration: model WMX6SF, the 1-3/4 inch steel hanger with the shot-fire bracket already integrated. No finish, size, or bracket options to specify. You only need to pair it with the powder-actuated fasteners suited to your steel or concrete substrate.
7) What is the WMX6SF made of, and will it hold up in an industrial environment?
Steel construction throughout, which is what gives it the rigidity and load-holding it needs as an overhead support point in commercial and industrial runs. For corrosive or wet exteriors, confirm you want a coated or stainless option instead.
How fast can I get the nVent CADDY WMX6SF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the nVent CADDY WMX6SF come with a warranty?
Absolutely. The nVent CADDY WMX6SF is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the nVent CADDY WMX6SF?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the nVent CADDY WMX6SF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!