You may also like
1/2" Standard Pipe Clamp (6 in polybag)
33916 - spec sheet
Features
- For warranty product details, refer to the Oatey Limited Warranty document
- Minimizes the transmission of water line noise
- Temperature ange of 0F to 160F
- Ribbed design allows pipe to cool faster and expand/contract freely
- Clamp design allows pipe to be flush mounted to walls and joists
- Can be used on hydronic systems
- No corrosion -- made of durable polypropylene (gray color)
33916 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.021
- Department:
- Plumbing
- Product Group:
- Plumbing Accessories
- Product Subgroup:
- Pipe Supports
- Product Type:
- Support Clamp
- Product Weight:
- 0.092
OATEY 33916 – Frequently Asked Questions
1) What pipe size does the Oatey 33916 clamp fit?
The Oatey 33916 is a 1/2 inch standard pipe clamp, so it sizes to 1/2 inch pipe or tube. Each polybag holds 6 clamps, which is the way it comes, so plan quantity in multiples of 6 when you are strapping a run.
2) Will a plastic pipe clamp rust or react on a copper water line?
No. The 33916 is molded polypropylene (gray) rather than metal, so there is no corrosion and no metal-to-copper contact at the support point. That is the usual reason people choose a plastic clamp over a steel strap on a copper run.
3) Can I use these clamps on a hot water or hydronic heating line?
Yes, within a temperature range of 0F to 160F, and the description states it can be used on hydronic systems. For anything running above 160F, this is the wrong clamp.
4) Do these clamps let pipe expand and contract, or will they pin it and cause ticking?
The clamp body is ribbed, which lets the pipe cool faster and move freely as it expands and contracts instead of being pinched tight. It also cuts down the water line noise transmitted into the framing, which is the common complaint with a rigid metal strap driven hard into a stud.
5) Can I mount pipe tight against a stud or joist with the Oatey 33916?
Yes. The clamp design holds the pipe flush to walls and joists, so you can run 1/2 inch line hard against framing rather than standing it off. Handy in a stud bay where insulation or drywall clearance is tight.
6) What is the Oatey part number for the 1/2 inch standard plastic pipe clamp?
Order it as Oatey 33916. That is the manufacturer part number for the 1/2 inch standard pipe clamp supplied 6 to a polybag.
7) How much does an Oatey 33916 pipe clamp weigh for shipping or a takeoff?
The 33916 is listed at a product weight of 0.092 with a volume of 0.021. It is a light molded plastic part, so a case of them adds almost nothing to a truck load or a job cart.
How fast can I get the OATEY 33916 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 33916 come with a warranty?
Absolutely. The OATEY 33916 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 33916?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 33916 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.