You may also like
2 in. Brass Cleanout Plug
42741 - spec sheet
Features
- 3 1/2" countersunk and tapped
- 4" countersunk and tapped
- 2-1/2" countersunk and tapped
- 3" countersunk and tapped
- 1-1/2" countersunk and tapped
- 2" countersunk and tapped
42741 - spec sheet
Manufacturer Resources
Product Specs
- Cleanout Cover Finish:
- Brass
- Volume:
- 0.007
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Cleanouts
- Product Type:
- Cleanout
- Product Finish:
- Brass
- Product Material:
- Brass
- Product Weight:
- 0.233
OATEY 42741 – Frequently Asked Questions
1) What size cleanout does the Oatey 42741 plug fit?
The Oatey 42741 is the 2 inch brass cleanout plug. It is a countersunk, tapped plug, so it threads into a 2 inch tapped cleanout ferrule or fitting and sits flush rather than standing proud. Oatey makes the same countersunk tapped plug in 1-1/2, 2-1/2, 3, 3-1/2 and 4 inch, so match the plug to the tapped size of the cleanout body you already have in the floor or stack.
2) Can I use the Oatey 42741 as a replacement for a corroded plug in an existing cast iron cleanout?
Yes, provided the existing cleanout body is tapped for 2 inch and takes a countersunk plug. This is a direct replacement part, not a complete cleanout assembly, so the ferrule or fitting stays in the floor and only the plug changes. If the old plug is a raised head, check that the housing has the countersunk seat before ordering.
3) Is the Oatey 2 inch cleanout plug solid brass or plated?
Solid brass, inside and out. Both the material and the finish are brass, which is why plumbers use it in cast iron cleanout ferrules where a steel or plastic plug can seize or corrode in place over time.
4) Why choose a countersunk brass cleanout plug instead of a raised head plug?
A countersunk plug has a recessed square socket instead of a raised boss, so nothing sticks up above the cleanout. That matters when the cleanout lands in a finished floor under tile or carpet, or anywhere a raised head would be a trip point or block a cover plate from seating. A raised head plug is easier to grab with a wrench, so it is the better pick on an exposed stack cleanout in a mechanical room. The Oatey 42741 is the 2 inch countersunk version.
5) Does the Oatey 2 inch brass cleanout plug come with a gasket or cover plate?
It ships as the brass plug alone. There is no cover plate, access cover, or ferrule included, so if you are building a new cleanout you will also need the tapped body or ferrule, and a floor access cover if the cleanout is in a finished surface.
How fast can I get the OATEY 42741 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 42741 come with a warranty?
Absolutely. The OATEY 42741 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 42741?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 42741 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.