4-1/4 in. Stainless Steel Snap-Tite Strainer
42138 - spec sheet
Features
- Will coordinate with most popular faucet finishes to complement any glamour bathroom suite
- Available in a variety of popular finishes
42138 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.012
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Fittings
- Product Type:
- General Fittings
- Product Weight:
- 0.15
OATEY 42138 – Frequently Asked Questions
1) What size opening does the Oatey 42138 Snap-Tite strainer cover?
The Oatey 42138 is a 4-1/4 inch stainless steel Snap-Tite strainer, so measure the drain opening it has to cover and confirm the surrounding flat area is wide enough for a 4-1/4 inch face to sit down properly. If your drain body takes a smaller or larger cover, this one will not seat correctly.
2) Is the Oatey 42138 strainer threaded, or does it just snap in?
It is a Snap-Tite strainer, meaning the cover snaps into the drain rather than threading in. There is no thread to match up and no fasteners to buy, which is why it is a common choice for shower and floor drain cover replacement where the original snap-in cover has rusted or gone missing.
3) Will a stainless steel drain strainer hold up in a commercial shower or a multi-family unit?
Stainless is the reason to pick this one. The 42138 strainer is stainless steel rather than plated pot metal, so it stands up to constant wet use and cleaning chemicals better in high-traffic shower rooms and apartment bathrooms, and it keeps its look next to the fixture trim instead of pitting.
4) Will the Oatey 42138 strainer match the faucet finish in the bathroom?
Oatey states this strainer coordinates with most popular faucet finishes, so it is meant to sit alongside standard bathroom trim without clashing. If you are standardizing a building on one look, order one, set it next to the fixtures on a sample unit, and confirm the match before you buy for every bathroom.
5) What part number do I order for the Oatey 4-1/4 inch stainless Snap-Tite strainer?
Order Oatey part number 42138. That is the manufacturer number for the 4-1/4 inch stainless steel Snap-Tite strainer, and it is the number to quote if you are stocking it as an MRO repeat item.
6) How light is the Oatey 42138 strainer for stocking on a service truck?
At 0.15 in listed product weight, the 42138 strainer is a trim piece, not an assembly. It carries and stocks easily in quantity on a van or in a maintenance cart, which matters if you are replacing covers across a portfolio of units on one route.
How fast can I get the OATEY 42138 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 42138 come with a warranty?
Absolutely. The OATEY 42138 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 42138?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 42138 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.