Omnia 1971 Modern Cabinet Pull...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$46.00
$36.18
Omnia Omnia 1971 Modern Cabinet Pull, Forged Solid Brass, 1 3/16" Projection OMN-1971

Omnia 1971 Modern Cabinet Pull - Forged Solid Brass with 1-3/16" Projection

(No reviews yet) Write a Review

Model: 1971/102.4
From the Modern Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$46.00
$36.18
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Omnia 1971 Modern Cabinet Pull - Forged Solid Brass with 1-3/16" Projection

The Omnia 1971 Modern Cabinet Pull combines contemporary design with traditional craftsmanship, featuring forged solid brass construction and a distinctive 1-3/16" projection. Available in six sizes ranging from 4" (102mm) to 18" (457mm) center-to-center spacing with consistent 3/4" width dimensions, this pull accommodates various cabinet and drawer applications. Multiple finish options including US4, US5, US10B, US14, US15, and US26 ensure compatibility with diverse residential design schemes.

Key Features

  • Multiple Size Options: Available in 4" (102mm), 6" (153mm), 8" (203mm), 10" (254mm), 12" (305mm), and 18" (457mm) center-to-center spacing for versatile installation requirements.
  • Consistent Dimensions: All sizes feature 3/4" width and 1-3/16" projection for uniform appearance across multiple installations.
  • Forged Solid Brass Construction: Premium forged brass material provides exceptional durability and long-lasting performance in residential applications.
  • Modern Design Profile: Contemporary styling complements modern interior design while maintaining timeless appeal.
  • Multiple Finish Options: Available in US4, US5, US10B, US14, US15, and US26 finishes to coordinate with existing hardware and fixtures.
  • Professional Installation: Standard mounting configuration allows for straightforward installation on cabinets and drawers.

Technical Specifications

  • Collection: Modern
  • Commercial/Residential: Residential
  • Department: Door Hardware
  • MAP Policy: Yes
  • Product Category: Cabinet Hardware
  • Product Group: Cabinet Hardware
  • Product Subgroup: Cabinet Knobs and Pulls
  • Product Substrate: Brass
  • Product Type: Cabinet Pulls
  • Series: 1971 Cabinet Pulls Series
  • Subcategory: Cabinet Pulls

Typical Applications

  • Modern Kitchen Cabinet Installations
  • Contemporary Bathroom Vanities
  • Custom Built-In Storage Solutions
  • High-End Residential Cabinetry
  • Designer Furniture Projects
  • Architectural Millwork Applications
  • Luxury Home Interior Upgrades

Why Omnia 1971?

Omnia 1971 cabinet pulls deliver premium residential-grade performance with forged solid brass construction engineered for lasting durability. The Modern collection combines contemporary design aesthetics with traditional metalworking craftsmanship, ensuring reliable function and distinctive style across sizes from 4" to 18" center-to-center for demanding residential applications.

Product Specs

Product Group:
Cabinet Hardware
Series:
1971 Cabinet Pulls Series
Product Subgroup:
Cabinet Knobs and Pulls
Product Type:
Cabinet Pulls
Subcategory:
Cabinet Pulls
Commercial/Residential:
Residential
MAP Policy:
Yes
Product Category:
Cabinet Hardware
Product Substrate:
Brass
Collection:
Modern
Department:
Door Hardware

Omnia 1971/102.4 – Frequently Asked Questions

1) Which Omnia 1971 size should I use on a 36 inch refrigerator panel versus a standard drawer?
Match the pull to the front it sits on. On standard 3 to 6 inch deep drawers the 4 inch and 6 inch work; 8 inch and 10 inch suit wider drawer banks and base cabinet drawers; the 12 inch and 18 inch are the appliance-panel sizes for integrated refrigerator and freezer fronts, where an 18 inch vertical pull reads correctly against a tall panel. All six sizes share the same 3/4 inch bar width and 1-3/16 inch projection, so mixing sizes across a kitchen still looks like one set.
2) What is a comparable modern bar-style cabinet pull in solid brass if the Omnia 1971 does not suit the door?
The Deltana SBP35 Modern Square Bar Pull is a solid brass modern bar pull at 3-1/2 inch, from the SBP Series, so it sits below the Omnia 1971's smallest 4 inch center-to-center size. The Omnia 1971 is forged solid brass with a 1-3/16 inch projection and a 3/4 inch width held constant across 4, 6, 8, 10, 12 and 18 inch center-to-center spacings. Choose the Deltana when the existing bore spacing is 3-1/2 inch and the Omnia when you need to run one profile across drawer banks and tall pantry doors.
3) For a short 3 inch center-to-center drawer, what should I use instead of the Omnia 1971?
The Omnia 1971 starts at 4 inch center-to-center, so a 3 inch bore will not accept it. The Trimco 553 Series drawer pull is built at 3 inch center-to-center, and the Trimco 562 Series covers 3-1/2 inch, 4 inch and 96mm center-to-center. If you are matching existing 3 inch holes, the Trimco 553 is the direct fit; if you are drilling new millwork and want one family from small drawers up to 18 inch appliance-scale doors, stay with the Omnia 1971.
4) How much hand clearance is there behind an Omnia 1971 pull?
The 1971 stands 1-3/16 inches off the face of the door or drawer front, and that projection is the same on every size from 4 inch up to 18 inch. That is enough room to get a full hand behind it rather than fingertips, which matters on heavy pantry doors and deep drawers. The bar itself is 3/4 inch wide on all sizes.
5) Is the Omnia 1971 pull solid brass all the way through, or plated pot metal?
Forged solid brass. The substrate is brass on every finish, including the plated ones. Polished Nickel, Satin Nickel and Polished Chrome are plated over that brass body, while Satin Brass, Antique Brass and Black Oil-Rubbed are finishes on the brass itself. Forged brass holds up better to being grabbed and hung on than cast zinc hardware.
6) What finishes does the Omnia 1971 cabinet pull come in, and what are the US codes?
Six: Satin Brass (US4), Antique Brass (US5), Black Oil-Rubbed (US10B), Polished Nickel Plated (US14), Satin Nickel Plated (US15) and Polished Chrome Plated (US26). Every one of the six sizes is offered in all six finishes, so you can run one finish across the whole kitchen without dropping to a different series for the appliance pulls.
7) Is the Omnia 1971 pull rated for commercial use?
It's a residential-grade pull. Omnia lists the 1971 for residential applications, so for high-traffic commercial casework, institutional millwork or an MRO standardization program you want a pull specified for that duty. The Trimco 553 and 562 Series drawer pulls are the commercial-line options among the drawer pulls we carry.
8) What's the difference between the Omnia 1971 and a modern square bar pull like the Deltana SBP35?
Both are contemporary bar-style pulls in solid brass, but they differ in range and profile. The 1971 is a rounded modern profile at 3/4 inch wide with 1-3/16 inch projection, offered from 4 inch all the way to 18 inch center-to-center in six finishes, so one series covers drawers and appliance panels. The Deltana SBP35 is a square bar profile in a single 3-1/2 inch center-to-center size. Pick the square bar if your design language is hard-edged; pick the 1971 if you need one look scaled across a whole kitchen.
9) I need a flush edge pull, not a projecting one. Is the Omnia 1971 the wrong part?
Yes, wrong type. The 1971 stands 1-3/16 inches proud of the front, so it's a grab pull, not a flush or edge-mounted pull. If you need an edge pull for a sliding panel or a face-frame-free application, the Schaub Sabre Collection edge pulls in solid brass come in 3 inch, 4 inch and 5 inch center-to-center.
10) Is a Schaub edge pull an alternative to the Omnia 1971 cabinet pull?
No, they are different hardware. The Schaub 10010, 10011 and 10012 in the Sabre collection are edge pulls, in solid brass at 3 inch, 4 inch and 5 inch center-to-center respectively, designed to sit at the edge of a door or drawer face. The Omnia 1971 is a surface-mounted cabinet pull with a 1-3/16 inch projection that stands off the face so the hand wraps under the bar. If a drawing calls for a flush or edge-mounted detail, the Sabre edge pulls apply; if it calls for a standing pull, the Omnia 1971 does.
11) For a refrigerator or range panel, is the Omnia 1971 18 inch the right pull or should I use an appliance pull?
Both routes exist. The Omnia 1971 is offered at 18 inch center-to-center in all six finishes, which covers appliance-panel runs while keeping the same 3/4 inch width and 1-3/16 inch projection as the drawer pulls beside it. The Schaub 79-8 Steamworks 8 inch pull is classified as an appliance pull if you want a purpose-built appliance profile at a shorter span. Use the Omnia 1971 when visual continuity with the surrounding cabinetry matters most.
12) I need knobs rather than pulls on the upper doors while keeping the Omnia 1971 on the drawers. What pairs with it?
The Orca Hardware Bachelor Collection CK-15030 round cabinet knob and CK-16030 round ring cabinet knob are both 1-1/4 inch diameter, and the Blackcomb Collection CK-17025 is a 25mm square knob. Any of the three gives you a single-bore knob for upper doors while the Omnia 1971 runs the two-bore drawer positions in matching finish families such as Satin Nickel Plated or Black Oil-Rubbed. Confirm finish naming between brands before mixing them in one room.
13) Is a steel T-pull bar a substitute for the Omnia 1971?
It is a different build. The Orca Hardware CK-12001 T-Pull Bar is a steel pull with a 2 inch bar width in satin nickel, from the 12-Bar Pull series. The Omnia 1971 is forged solid brass and is specified for residential cabinetry, with a 3/4 inch width. Where the job wants a steel substrate or a wider bar face, the Orca is the closer match; where the spec calls for solid brass, the Omnia 1971 is.
14) Do Omnia 1971 pulls come with screws, and what length do I need for thick drawer fronts?
The 1971 uses a standard two-post mounting configuration through the drawer or door front. Screw length has to suit your front thickness, so if you are running a 3/4 inch front with an applied panel or a slab door thicker than standard, plan on longer machine screws than the ones packed with typical cabinet hardware. Order them by the count of pulls, not by cabinet, since appliance panels often take one pull each while a drawer bank may take two.
15) Can I mix Omnia 1971 pulls with cabinet knobs in the same kitchen?
Yes, and it's a common layout: pulls on drawers, knobs on doors. The 1971 covers the pull side from 4 inch up to 18 inch. For the knob side, the Orca Hardware Bachelor Collection round knob and round ring knob are both 1-1/4 inch diameter, and the Blackcomb Collection square knob is 25mm. Just confirm the knob finish name matches what you are using on the 1971, since finish names differ between brands even when they look close.
16) If I want a period or decorative profile instead of the Omnia 1971's modern look, what else is there?
The Emtek Art Deco Cabinet Pull and the Emtek Alexander Cabinet Pull, both from the Schaub collection, function as cabinet knobs or pulls with decorative styling rather than the straight modern bar of the Omnia 1971, which is drawn from Omnia's Modern collection. The Emtek 8405 Select is another Schaub-collection cabinet pull option. The Omnia 1971 remains the choice when the millwork calls for a clean contemporary profile carried across six sizes.
How fast can I get the Omnia 1971/102.4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Omnia 1971/102.4 come with a warranty?
Absolutely. The Omnia 1971/102.4 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Omnia 1971/102.4?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Omnia 1971/102.4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!