Orbit 41050 Raised 4" Square 1-Gang Device Ring

Orbit 41050 Raised 4" Square 1-Gang Device Ring

The Orbit 41050 Raised 4" Square 1-Gang Device Ring is designed to extend a standard 4" square (4S) electrical box to accommodate a single-gang device or fixture installation. This raised ring provides the additional depth needed when a device, switch, or receptacle must sit flush with a finished wall or ceiling surface that is thicker than the box itself, such as when tile, drywall, or additional wall material has been added after the rough-in box was set. This device ring is available in raised depths ranging from 1/2" up to 1-1/2", letting installers select the exact amount of extra depth needed to bring a device flush with the finished surface on any given job. As a 1-gang configuration, it is sized to accept a single device opening, making it a practical solution for electricians and contractors working on commercial and industrial rough-in and finish-out projects where 4" square boxes are the standard enclosure. The ring mounts directly to the existing 4S box using the box's standard mounting configuration, allowing installers to quickly adjust box depth without replacing the entire enclosure. Because it ships across a range of raised depths, the same 41050 ring family can be matched to varying wall build-ups, from thin single-layer drywall to thicker tiled or multi-layer assemblies, all while keeping a consistent 4" square, 1-gang footprint.

Key Features

• Box Compatibility: Designed to fit standard 4" square (4S) electrical boxes, one of the most common enclosure sizes used in commercial and industrial wiring.
• Configuration: 1-gang opening sized for a single device, switch, or receptacle installation.
• Raised Depth Range: Available in depths from 1/2" to 1-1/2" so installers can match the ring to the exact surface build-up on the job.
• Raised Profile: Adds extra depth to the box so devices sit flush with finished wall or ceiling surfaces, compensating for surface build-up such as tile or additional drywall layers.
• Fast Installation: Attaches directly to existing 4S boxes, eliminating the need to swap out boxes when additional depth is required on a jobsite.
• Versatile Application: Suitable for use with a range of single-gang device types commonly installed in 4" square box systems.

Technical Specifications

• Box Size: 4" Square (4S)
• Gang Configuration: 1-Gang
• Ring Type: Raised
• Available Raised Depths: 1/2" to 1-1/2"

Typical Applications

• Commercial and Industrial Electrical Rough-In
• Single-Gang Device and Switch Installations
• 4" Square Box Depth Extension
• Finish-Out Work on Tiled or Multi-Layer Walls
• New Construction and Renovation Wiring Projects

Why Orbit?

Orbit electrical products are built to give installers reliable, code-compliant components for everyday rough-in and finish work. The 41050 raised ring family offers a simple, practical way to adapt standard 4" square boxes to single-gang device installations, with a depth range of 1/2" to 1-1/2" to match varying wall thicknesses, all without the added cost and labor of replacing enclosures already in place.