Orca Hardware 22ND Series, Goose Neck Floor Stop With Black Tip

No. The 22HD is not ADA compliant. A gooseneck stop rises off the floor on a neck, so it sits in the walking path and does not meet ADA requirements. On an accessible route or a barrier-free opening, use a low-profile floor bumper such as the Deltana UFBS138 square floor bumper or the Emtek 2251 half dome stop, or move the stop off the floor entirely.

It does both. The 22HD is a gooseneck floor stop with a door holder function, so the arched neck catches the door and keeps it standing open rather than only cushioning the swing. A plain floor bumper like the Emtek 2254 or the Deltana UFB4505 stops the door and lets it swing back; if you need it to stay open, the gooseneck is the one to order.

The Delaney 40118X Gooseneck Floor Door Stop and the Emtek 2253 Goose Style Door Stop are the same form factor as the Orca TH-22HD: a floor-mounted stop on a curved goose neck riser rather than a low dome sitting directly on the floor. The goose neck shape is what lets the bumper meet the door face at height instead of at the bottom rail, so all three suit the same kind of opening. The Orca TH-22HD covers doors 1-3/8 inch or 1-3/4 inch thick and comes in Oil-Rubbed Bronze and Brushed Chrome.

A dome or bumper style floor stop sits low against the floor instead of rising on a neck. The Delaney 40260X Dome Door Stop, the Emtek 2251 Half Dome Door Stop, and the Ives FS13 and FS17 brass floor dome stops are all of that type. The Ives FS13 and FS17 are heavy duty. The trade off is contact height: the Orca TH-22HD goose neck reaches the door face above the floor, while a dome catches the door at its very bottom edge, which matters on doors with a wide bottom rail or a sweep.

The Orca TH-22HD is a door holder type floor stop, so it does hold as well as stop. If the requirement is a hold open that engages and releases on its own, the Ives FS40, FS41, FS42 and FS43 are automatic floor stops and holders with adjustable door-to-floor clearance, all heavy duty. For a hold open that grabs the door magnetically at the wall or floor rather than by a mechanical catch, the SOSS MDH is a magnetic door holder and stop measuring 3-5/16 inch by 1-3/4 inch, also heavy duty.

No. The Deltana UFB4505 round universal floor bumper at 1-1/2 inch, the UFBS138 square universal floor bumper at 1-3/8 inch, the UFBP4505 pattern cap bumper at 1-5/8 inch, and the Emtek 2254 floor door bumper at 1-3/8 inch by 1-1/4 inch are short solid stops that take the door at floor level. The Orca TH-22HD is a goose neck: it rises off the floor so the bumper tip meets the door face above the bottom rail. Order a bumper only where the door bottom will actually make contact at that height.

The 22HD is rated commercial, and for offices, multi-family corridors and light institutional openings it does the job. For high traffic doors that get kicked open all day, the heavier options are the Ives FS13 or FS17 brass floor dome stops with a replaceable rubber bumper, and the Ives FS18S/FS18L security floor stop where tampering is a concern. Being able to swap the bumper instead of the whole stop matters on a door that sees constant use.

A gooseneck like the 22HD is a fixed height stop, so the undercut you have is the undercut it has to work with. Where the door-to-floor clearance is large or varies across a set of openings, the Ives FS40 / FS41 / FS42 / FS43 automatic floor stop and holder is the one built for adjustable door-to-floor clearance. If the floor is carpeted or you would rather not drill it at all, the SOSS MDH magnetic door holder and stop mounts as a holder without relying on a neck height.

They are the same style of part. The Delaney gooseneck floor door stop and the Emtek 2253 goose style door stop are the direct cross-brand equivalents, so any of the three gives you the arched floor-mounted stop. Where the 22HD is specific is the published fit: it is rated for 1-3/8 or 1-3/4 inch doors and comes in oil-rubbed bronze or brushed chrome with a black tip. Pick on finish match to the rest of the opening.

Not a straight swap. A dome stop such as the Delaney dome stop or the Deltana UFBD3505 sits low and mounts on its own footprint, while the 22HD gooseneck anchors to the floor and reaches up to meet the door face, so the anchor location is set by where the door lands, not by the old hole. Plan on a fresh anchor point. What you gain is the holder function, since the gooseneck keeps the door open and a dome bumper does not.

The Ives heavy duty line is built for that service: the FS13 and FS17 brass floor dome stops carry a heavy duty rating, the FS17 with a rubber bumper and the FS13 with a replaceable rubber bumper, which lets maintenance renew the wear part without pulling the stop off the floor. The Orca TH-22HD is rated commercial and is a goose neck rather than a dome, so on a corridor with carts and heavy leaf traffic the dome sits out of the traffic path where a riser does not.

The Ives FS18S and FS18L security floor stops are made for that condition and are heavy duty. Use them where a resident or the public can reach the stop and a standard riser would be a target. The Orca TH-22HD is a commercial goose neck door holder without a security designation, so it fits ordinary openings rather than secured ones.

Deltana makes solid brass floor stops with a finished cap: the UFBD3505 is a 3-1/2 inch round decorative universal floor bumper and the UFBP4505 is a 1-5/8 inch round bumper with a pattern cap. Both are floor mounted low profile bumpers. The Orca TH-22HD takes a different approach for a finished space, offering the goose neck in Oil-Rubbed Bronze and Brushed Chrome to match surrounding trim.

They serve the same opening but present differently. The Emtek 2257 is a 1-1/2 inch cylindrical floor bumper, a straight post standing off the floor, while the Orca TH-22HD is a goose neck whose riser curves so the tip meets the door face at an angle. A cylinder contacts the door on its top or side face depending on how the door swings over it; the goose neck is aimed at the door face by its curve. Check which one lines up with your door's swing and bottom clearance before ordering.