Orca Hardware HPHD HD Hinge Pin Stop

No drilling. The HPHD hinge pin stop clamps onto the barrel of an existing butt hinge, so the stop rides on the hinge itself rather than mounting to the door face, baseboard, or wall. That makes it the usual fix in rentals and finished rooms where you don't want fasteners in drywall or trim. The tradeoff is that the stopping force goes into the hinge and the door edge instead of into a wall-mounted bumper.

Residential. Orca lists the HPHD as a residential-application door holder, so it suits apartments, single-family, and light multi-family interior doors. For a school corridor, a hospital wing, or anything on a door closer or high-cycle traffic, spec a commercial-rated stop instead. Delaney's Door Saver hinge pin door stop is the commercial-labeled option in this same hinge-pin style.

No. The HPHD is not ADA compliant per Orca's own listing data, so keep it off openings in the accessible path of travel where protruding-object or operating-force rules apply. It is intended for residential interior doors.

Hinge pin stops win where you cannot or will not fasten into the wall or floor, and where the door swings into an open wall you want to protect. Wall and floor bumpers absorb the impact away from the hinge and are the better choice on heavy doors, doors with closers, and high-traffic openings. The Orca HPHD is a residential-application hinge pin stop, so treat it as the no-drill solution for interior house doors rather than a substitute for a commercial wall stop.

No. A hinge pin stop needs a conventional butt hinge with an exposed knuckle barrel and a removable pin to clamp onto. Continuous geared hinges and pivot sets give it nothing to grip. For a pivot application, Emtek's 2241 brass hinge pivot stop is the piece built for that condition.

The Orca HPHD is a hinge pin stop in zinc alloy, rated for residential use, that mounts on the hinge barrel to hold or stop the door. The closest direct equivalents are the Sure-Loc Heavy-Duty Hinge Pin Door Stop (SUR-DS10) and the Delaney Heavy Duty Hinge Pin Door Stop (DLY-402XXX), both built as heavy duty hinge pin door stops that install the same way on the hinge. If you are matching a set of doors already carrying hinge pin stops, any of the three replaces the existing unit without new holes in the door or wall.

The Orca HPHD is designated for residential application. For a commercial opening, the Delaney Door Saver Commercial Hinge Pin Door Stop (DLY-40120X) is the peer carried as a commercial hinge pin stop and is the one to spec for corridor and common-area doors in multi-family or institutional buildings. Keep the Orca HPHD for in-unit doors, where its residential designation matches the traffic.

Zinc alloy body with a plated finish. Zinc alloy takes a decorative plating well and is the standard substrate for this class of hardware, but it is not stainless, so in a steam-heavy bath or a salt-air coastal install expect the plating to be the wear point over time. Oil-rubbed bronze is a living finish and will patina with handling.

Four finishes: oil-rubbed bronze, satin nickel, polished chrome, and black. That covers the four most common residential hinge and lever finishes, so matching a fleet of doors across a building is usually straightforward. Oil-rubbed bronze and black read very differently side by side, so pick from the actual hinge rather than from a paint chip.

Both, in the sense the category allows. Orca classes the HPHD as a door holder, and the adjustable screw on a hinge pin stop sets where the door stops on the backswing and holds it there by friction. It is not a positive latching hold-open like a closer's hold-open arm, so it won't hold a door against wind or a closer.

They are not interchangeable. The Orca HPHD is a zinc alloy hinge pin stop that clamps onto the hinge barrel of a conventional butt hinge. The Emtek 2241 is a brass hinge pivot stop, a different part that works with Emtek's hinge line rather than dropping onto any standard hinge the way a hinge pin stop does. If you are retrofitting existing butt hinges, stay with the hinge pin style; the Delaney DLY-402XXX and Sure-Loc SUR-DS10 are the heavy duty hinge pin alternatives.

Yes. The Orca HPHD is the heavy duty build of the hinge pin stop family. For a closet, pantry, or bedroom door that just needs the knob kept off the drywall, the Sure-Loc Hinge Pin Door Stop (SUR-DS9) and the Sure-Loc Hinge Door Stop (SUR-DS11) are the lighter-duty hinge-mounted options. All three go on the hinge barrel, so the install labor is identical and the choice comes down to how hard the door gets thrown.

The Orca HPHD is set up as a door holder, so it both stops the swing and holds the leaf at the set position when the adjuster is engaged. Among the hinge-mounted peers, the Sure-Loc SUR-DS10 and Delaney DLY-402XXX are the heavy duty hinge pin stops to compare against if you want another brand in the same mounting style. Orca offers the HPHD in oil-rubbed bronze, satin nickel, polished chrome, and black so it can be matched to the hinges already on the opening.