Orca Hardware AH Series 8.62" Barn Door Flush Pull

The Orca Hardware AH Series flush pull is an 8.62 inch long recessed pull with a 6.5 inch product size, so the door face has to be routed out to accept that footprint. Because it sits flush in the door rather than standing proud, plan the pocket before hanging the slab. Nothing projects past the face once it is set, which is the point on a barn door that has to pass the wall or a jamb casing.

They do different jobs on the door. The Orca AH Series pull is a flush pull, 6.5 inches by 8.62 inches, made of steel, and its function is simply to give you a grip on a sliding or barn door. The Ives 991A is an aluminum sliding door pull with a privacy function, so it adds a latching/privacy element for a bed or bath opening along with decorative coined edges. If the door needs to secure a bathroom or bedroom, the 991A addresses that; if you only need a recessed grip so the door can clear the jamb or wall, the Orca flush pull is the straightforward choice.

The Orca AH Series pull needs a 6.5 inch by 8.62 inch footprint on the door face, which is a lot of real estate on a narrow stile. The Trimco 7061 Series fOCAL small flush cup pull is dimensioned at 2-3/4 inches by 2-1/16 inches, which fits far tighter stiles. The Trimco 7059 Series fOCAL flush cup pull is the other flush cup option in the same family if you want something between the two. Verify your stile width and the required mortise depth before ordering.

A flush pull recesses into the door face, so the door can slide fully against the wall or through a pocket without the hardware hitting anything. A surface handle sticks out and needs clearance. The Orca AH Series pull is the recessed type, 8.62 inches long, meant for sliding and barn doors. If the door is on exposed barn track with plenty of wall clearance and you want a grip for a hard pull, a surface bar handle is the easier install since it does not require routing.

Steel. The AH Series flush pull is built from steel, which is what you want on a door that gets pulled hard every day in a rental or a commercial corridor rather than a decorative interior slider.

Orca lists the AH Series flush pull as commercial. Steel construction backs that up for multifamily corridors, hospitality, and office sliders, not just a residential closet door.

Length and grip. The Orca AH Series is an 8.62 inch elongated recessed pull, giving you a full hand along the edge of a heavy sliding slab. A cup pull like the Trimco 7061 Series fOCAL small flush cup measures 2-3/4 by 2-1/16 inches, a fingertip pocket suited to lighter doors and cabinet style applications. Trimco also makes the larger 7059 Series fOCAL flush cup pull if you want a cup profile in a bigger size.

The Orca AH Series 8.62 inch flush pull is designated for commercial use and is a steel flush pull sized 6.5 inches by 8.62 inches, with no locking function. The Schlage Residential SC991 is a solid brass sliding door pull built around a privacy/bed/bath function with decorative coined edges, which suits residential bed and bath sliders. For a commercial barn door where the pull only has to provide a grip and clear the wall, the Orca AH Series is the direct fit; specify the SC991 when the opening calls for privacy hardware in brass.

They are the same type of part - a recessed cup pull that sits flush in the door face - but they are not the same size or material. The Orca AH Series pull measures 6.5 inches by 8.62 inches and is steel. The Trimco 7059 Series fOCAL flush cup pulls are a separate series of flush cup pulls, and Trimco also offers the 7061 Series small flush cup pull at 2-3/4 inches by 2-1/16 inches. If your door already has a mortise cutout, match the cutout dimensions before treating any of these as a drop-in swap.

Order it as Orca Hardware AH-RECPULL, the AH Series recessed barn door flush pull in the 6.5 x 8.62 inch black configuration. One part number covers it, so there is no handing, finish, or size suffix to specify.

No. The decorative coined edge detail is a feature of the Ives 991A aluminum sliding door pull and the Schlage Residential SC991 solid brass sliding door pull. The Orca Hardware AH Series 8.62 inch pull is a plain steel flush pull in a black finish, sized 6.5 inches by 8.62 inches. If the specification calls out a coined or decorative edge on the escutcheon face, the Ives or Schlage pulls carry that detail.