Pamex DD03-11 Heavy Duty Handrail Bracket

Projection is 3 inches, measured from the wall face to the rail saddle. That sets your handrail out far enough to clear knuckles on the wall, and it is the number to match if you are adding brackets to a run that already has others on it. Mixing a 3 inch bracket with a deeper one on the same rail will put a kink in the line.

Surface screw application. The base plate sits flat on the finished wall and fastens through with screws, so there is no mortising or wall cutting. Hit a stud or use an appropriate anchor in drywall, since a handrail bracket carries live load.

Zinc die-cast body, plated to the finish you order. It is built as a heavy duty bracket, but Pamex classes the DD03-11 as residential hardware, so it suits house stairs, town homes and apartment interiors. For a commercial stair or a code-driven public egress stair, spec a bracket rated for that use instead.

The DD03-11 is fixed at a 3 inch projection, so it will not work if your rail profile or wall trim needs more clearance. Delaney makes a 3-1/2 inch heavy duty handrail bracket, which buys you the extra half inch. Orca's 10XL Series heavy duty bracket is another option if you want a round base plate rather than a rectangular one.

The Pamex DD03-11 is a zinc die-cast handrail bracket with a 3 inch projection for surface screw mounting. The nearest straight equivalent is the Delaney 3" Handrail Bracket (DLY-4061), which is built around the same 3 inch bracket size. If you want a deeper standoff from the wall, the Delaney DLY-40615 is a 3-1/2 inch heavy duty handrail bracket instead.

The Pamex DD03-11 sets the rail 3 inches off the wall. For a longer standoff, the Delaney DLY-40615 is a 3-1/2 inch heavy duty handrail bracket, which adds a half inch of hand clearance behind the rail.

Overall size is 1-1/4 x 3-1/8 inches. That is a compact footprint, so it lands cleanly on a narrow pilaster or trim board without overhanging, and it covers little enough wall that touch-up paint behind an old bracket is usually not an issue.

Six: 605 bright brass, 609 antique brass, 613 oil rubbed bronze, 619 satin nickel, 622 matte black and 625 bright chrome. Those are standard BHMA finish numbers, so if the other hardware in the unit is already called out as 619 or 613 you can match the brackets to it without guessing at a name.

Delaney's 3 inch handrail bracket is the closest match on standoff. If you want a different look at the wall plate, Delaney also offers a decorative handrail bracket, and Sure-Loc lists both a standard and a heavy duty handrail bracket. Compare base plate size before you swap, since the Pamex plate is 1-1/4 x 3-1/8 inches and a larger plate may not cover the same footprint on a narrow trim board.

It works well as a standard item for residential stock: one model, one 3 inch projection, and six finishes to cover whatever each building was originally trimmed in. Keeping to a single projection means any bracket off the shelf drops into any existing run without throwing the rail line off. Pamex classes it as residential, so keep a separate line item for any commercial stair you maintain.

The Pamex DD03-11 is the heavy duty version of the zinc die-cast handrail bracket. If the run does not need heavy duty support, the Orca Hardware 10ST Series (ORC-TH-10ST) is a standard handrail bracket, and the Sure-Loc SUR-HB1 is Sure-Loc's standard handrail bracket rather than its heavy duty SUR-HB3.

The Pamex DD03-11 has a plain rectangular base measuring 1-1/4 inches by 3-1/8 inches, offered in bright brass, antique brass, matte black, bright chrome, oil rubbed bronze and satin nickel. For a more ornamental look, the Delaney Decorative Handrail Bracket (DLY-406111) is a decorative pattern, and the Orca Hardware 10XL Series (ORC-TH-10XL) uses a round base instead of a rectangular one.

The Pamex DD03-11 mounts with surface screws through its 1-1/4 inch by 3-1/8 inch base plate. The Orca 10ST, 10HD and 10XL Series brackets differ in base shape - the 10XL uses a round base while the 10HD and 10ST do not - so the screw pattern and the footprint left on the wall will not line up with an existing DD03-11 hole pattern. Plan on new pilot holes if you switch.