You may also like
Klein Tools 1716-70 Parallel Jaw Grip, HDPE Wire to 1.362-Inch
Model: KLN-1716-70
Parallel Jaw Grip, HDPE Wire to 1.362-Inch
Features
Made in USA
Spring-loaded for one-handed operation and easy placement on the conductor
Common tree wire cable types include general cable,...
Klein Tools
$979.86
$929.86
Klein Tools 1716-60 Parallel Jaw Grip, 0.7 to 1.3-Inch HDPE Wire
Model: KLN-1716-60
Parallel Jaw Grip, 0.7 to 1.3-Inch HDPE Wire
Warnings
Do not exceed rated capacity.
When used on/near energized lines, ground, insulate, or isolate grip before pulling.
Always match proper size and...
Klein Tools
$1,191.16
$1,141.16
Klein Tools 1671-10 Parallel Jaw Grip, 0.75-Inch Cable Capacity
Model: KLN-1671-10
Parallel Jaw Grip, 0.75-Inch Cable Capacity
Features
Made in USA
Manufactured from drop-forged, heat-treated steel for excellent durability
When latch is closed, it helps maintain cable position in...
Klein Tools
$791.43
$741.43
Parallel Jaw Grip - Lock, HDPE Wire to 1.362-Inch
1716-71 - spec sheet
Features
- Tough carbide grit technology withstands even the harshest jobsite conditions
- Southwire® is a registered trademark of Southwire Company, LLC
- Pulls cable diameters 0.625-Inch to 1.362-Inches (15.9 to 35.0 mm)
- 4,000-Pound (1814 kg) maximum safe load
- Common tree wire cable types include general cable, Hendrix® aerial systems, rite lite BLL conductor and Southwire® S2 covered cable
- Innovative high-traction surface grips the cable without damaging the outer jacket
- High Traction Grip Surface, Lock
- Hendrix® is a registered trademark of Marmon Utility, LLC
- Spring-loaded for one-handed operation and easy placement on the conductor
- Securely pulls HDPE-coated cable commonly known as tree wire
- Locking handle keeps jaw open while using hot stick to place grip on cable
Warnings
- When used on/near energized lines, ground, insulate, or isolate grip before pulling.
- Always match proper size and type of grip to application.
- Do not exceed rated capacity.
- Before each use, clean jaw area and inspect grip for proper operation to avoid slippage.
1716-71 - spec sheet
Manufacturer Resources
Product Specs
- Cable Diameter:
- 0.625" to 1.362" (15.9 to 34.6 mm)
- Cable Type:
- HDPE-Coated
- Depth:
- 13.0500 in
- Height:
- 2.9250 in
- Hot Latch:
- Yes
- Jaw Length:
- 4.5" (11.4 cm)
- Jaw Type:
- Round
- Locking Handle:
- Yes
- Material:
- Forged Steel
- Maximum Safe Load:
- 4000 lb (1814 kg)
- Overall Height:
- 8.5" (21.6 cm)
- Overall Length:
- 13.05" (17.7 cm)
- Overall Width:
- 6.975" (7 cm)
- Spring:
- Yes
- Standard:
- OSHA
- Swing Latch:
- No
- Type:
- Parallel Jaw Grip
- Weight:
- 5.0750 lbs
- Width:
- 6.9750 in