You may also like
Pasco 4351 Mini Tubing Cutter, 1/8" to 7/8" Capacity
The Pasco 4351 Mini Tubing Cutter is a compact rough-in hand tool built for plumbers and contractors who need to cleanly cut copper, aluminum, and thin-wall tubing in tight spaces. Sized for a cutting capacity of 1/8" to 7/8", this mini cutter fits into cramped wall cavities, cabinet bases, and behind-the-fixture areas where a full-size tubing cutter simply will not reach. It is supplied 10 EA per package, making it a practical restock item for service trucks and shop inventory.
Key Features
- Trade Size: Cuts tubing from 1/8" up to 7/8" in diameter, covering the common small-bore copper and tubing sizes found in rough-in plumbing work.
- Compact Mini Design: The reduced-profile body is designed to access tight, confined spaces behind walls, under sinks, and in mechanical chases where a standard-size tubing cutter cannot maneuver.
- Rough-In Ready: Purpose-built for behind-the-wall and under-fixture plumbing installations, giving installers a clean, square cut on small-diameter tubing runs.
- Jobsite Pack Quantity: Supplied 10 EA per package with a minimum order quantity of 1 EA, making it easy for plumbing contractors and supply houses to stock at the quantity their crews actually use.
- Lightweight for Field Use: At approximately 0.28 LB consumer package weight, this mini tubing cutter is light enough to carry in a tool pouch or truck bag alongside other rough-in hand tools.
Technical Specifications
- Cutting Capacity: 1/8" to 7/8"
- Product Type: Home Improvement & Commercial Supplies - Plumbing Accessories
- Consumer Package Weight: 0.28 LB
- Quantity: 10 EA
- Minimum Order Quantity: 1 EA
- Prop 65 Warning: This product carries a California Proposition 65 warning label.
Typical Applications
- Residential and Commercial Rough-In Plumbing
- Small-Diameter Copper and Tubing Cuts in Tight Wall Cavities
- Under-Sink and Cabinet-Base Tubing Repairs
- Service Truck and Maintenance Kit Stocking
- Renovation and New Construction Plumbing Rough-In
Why Pasco?
Pasco is a trusted name among plumbing contractors for practical, job-tested hand tools that hold up to daily rough-in use. The 4351 Mini Tubing Cutter delivers the compact reach professionals need for confined spaces without sacrificing a clean, square cut on tubing from 1/8" to 7/8". Stocked at 10 EA per package, it is a convenient, reliable addition to any plumber's tool bag or supply house shelf.
Manufacturer Resources
Product Specs
- Prop 65 Warning:
- Y
- Product Type:
- Tubing Cutter
- Consumer Package Weight:
- 0.28 LB
- Item Quantity:
- 10 EA
- Minimum Order Quantity:
- 1 EA
- list_batch:
- PAO-20260924
- Department:
- Plumbing
- Product Subgroup:
- Plumbing Tools
- Product Size:
- 1/8"
Pasco 4351 – Frequently Asked Questions
1) What size tubing will the Pasco 4351 mini tubing cutter handle?
The Pasco 4351 cuts tubing from 1/8 inch up to 7/8 inch outside diameter, which covers the small-bore copper and thin-wall tubing used on most rough-in work. Anything above 7/8 inch needs a full-size cutter.
2) Can a mini tubing cutter get into an under-sink or in-wall space where a standard cutter won't fit?
That is the reason the 4351 exists. The reduced-profile body is made to spin inside cramped wall cavities, cabinet bases, mechanical chases and behind-the-fixture areas where a full-size tubing cutter cannot make a full rotation. You still need enough clearance for the body to turn around the pipe, so it is not a substitute for a close-quarters ratcheting cutter when the tube is right against a stud.
3) Is the Pasco 4351 sold individually or as a pack?
It is packaged 10 EA per package, with a minimum order quantity of 1. That makes it practical for a supply house shelf or for a contractor outfitting several service trucks at once rather than buying one tool.
4) What materials can the Pasco 4351 cut?
Copper, aluminum, and thin-wall tubing. It is a wheel-type cutter sized for small-diameter soft tubing runs, not for steel pipe or thick-wall material.
5) Does the Pasco 4351 tubing cutter carry a Prop 65 warning?
Yes, the 4351 ships with a California Proposition 65 warning label. Institutional and government buyers who track Prop 65 disclosures should note it on their submittal paperwork.
6) Is this mini cutter light enough to keep in a tool pouch?
Yes. Consumer package weight is listed at 0.28 LB, so it rides in a pouch or truck bag without adding noticeable bulk alongside other rough-in hand tools.
7) What is the Pasco part number for the mini tubing cutter?
Pasco 4351 is the manufacturer part number for the mini tubing cutter with 1/8 inch to 7/8 inch capacity.
How fast can I get the Pasco 4351 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pasco 4351 come with a warranty?
Absolutely. The Pasco 4351 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pasco 4351?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Pasco 4351 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.