Pass & Seymour 2087 Spec-Grade...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$48.44
Pass & Seymour 2087 Spec-Grade Dead Front 20A Self-Test GFCI Receptacle

Pass & Seymour 2087 Spec-Grade Dead Front 20A Self-Test GFCI Receptacle

(No reviews yet) Write a Review

Model: 2087-I
Selected Color is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$48.44
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour 2087 Spec-Grade Dead Front 20A Self-Test GFCI Receptacle

The Pass & Seymour 2087 Spec-Grade Dead Front 20A Self-Test GFCI Receptacle delivers automatic ground-fault protection for commercial and residential circuits. Rated 20A at 125VAC, 60 Hz with a NEMA 5-20R configuration, this Class A GFCI conducts an automatic self-test every three seconds and flashes its red LED trip indicator if the device fails and needs replacement. This device is available in Ivory and Light Almond so it can match a range of finish schemes while sharing the same electrical performance. Built with SafeLock™ Protection, it disconnects power to the receptacle if critical internal components are damaged, and it is UL Listed and cULus rated for dependable performance.

Key Features

  • Amperage Rating: 20 Amp feed-thru capacity protects downstream receptacles wired in a feed-thru configuration.
  • Durable Construction: High-impact-resistant thermoplastic housing with an extra-long strap for secure box mounting.
  • Self-Test Protection: Automatic test every three seconds with a red LED trip indicator that flashes when the GFCI should be replaced.
  • SafeLock™ Protection: Disconnects power to the receptacle if critical components are damaged and protection is lost.
  • Miswire Protection: Prevents line-load reversal miswire, cutting power to the face and downstream receptacles if wired incorrectly.
  • Trip Performance: Trip Time of 0.025 sec. nominal per UL Standard, with a Trip Threshold of 5 +/- 1 mA and a 10kA short circuit rating.
  • Supply Voltage Range: 102-132 VAC, rated as a 1 ½ HP motor control switch.
  • Wiring: Side or internal screw-pressure-plate back wire accepts #10-#14 AWG solid or stranded copper wire, with dual-direction test and reset buttons and an Auto-Ground clip for positive grounding.
  • Color Options: Available in Ivory and Light Almond to suit standard finish palettes.

Certifications & Compliance

  • UL Listed
  • cULus Listed
  • UL498 Standard
  • Meets 2015 UL Requirements
  • Exceeds UL 943 Voltage Surge Requirements (survives 100x the required UL 3kA/6kV surge test cycles)
  • Federal Spec WC596

Technical Specifications

  • CSA Listed: No
  • UL Listed: Yes
  • Volts: 125
  • Amps: 20A
  • cULus: Yes
  • Federal Spec: Yes

Typical Applications

  • Kitchen, Bath, and Laundry Receptacle Circuits
  • Commercial and Spec-Grade Electrical Installations
  • Feed-Thru Wiring to Protect Downstream Receptacles
  • Motor Control Switching Applications
  • Renovation and New Construction Wiring

Why Pass & Seymour?

Pass & Seymour builds this Spec-Grade GFCI receptacle with high-impact-resistant thermoplastic construction, a proven SafeLock™ Protection design, and self-test circuitry that exceeds UL 943 surge requirements by 100x. Backed by UL Listing and cULus certification, it delivers the code-compliant, dependable ground-fault protection professional electricians rely on, available in Ivory or Light Almond to match the job.

Manufacturer Resources

Product Specs

list_batch:
PASS-20260820
Product Type:
GFCI Receptacle
Amperage Rating:
20A
Voltage Rating:
125V
Configuration:
NEMA 5-20R
Listing:
cULus
Standards:
UL498
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Receptacles & Outlets
Product Depth:
1.13 in
Product Width:
1.73 in
Product Height:
4.2 in

Pass & Seymour 2087-I – Frequently Asked Questions

1) Will the Pass & Seymour 2087 GFCI work on a 20-amp kitchen circuit with 12 AWG wire?
Yes. The 2087 is rated 20A at 125VAC, 60 Hz with a NEMA 5-20R face, and the terminals accept #10 through #14 AWG solid or stranded copper, so 12 AWG branch wiring lands fine. You can use side screws or the internal screw-pressure-plate back wire. Kitchen, bath and laundry receptacle circuits are exactly what it is built for.
2) Can one 2087 GFCI protect the other outlets downstream on the same circuit?
Yes. The 2087 has 20A feed-thru capacity, so wiring line and load lets it protect downstream receptacles on the circuit. It also has miswire protection: if line and load are reversed during install, power is cut to the face and to the downstream receptacles rather than leaving them unprotected.
3) Does the Pass & Seymour 2087 meet the listings a commercial spec job requires?
The 2087 is UL Listed and cULus Listed, built to UL498, meets 2015 UL requirements, and carries Federal Spec WC596. It also exceeds UL 943 voltage surge requirements, surviving 100 times the required 3kA/6kV surge test cycles. It is not CSA Listed.
4) Which GFCI receptacle should I use instead of the Pass & Seymour 2087 where tamper-resistant outlets are required?
The 2087 is a 20A 125V self-test GFCI with a NEMA 5-20R face and is not described as tamper resistant. Where the jurisdiction calls for tamper-resistant receptacles, the Bryant GFRTR20W is a tamper-resistant GFCI rated 20A/125V, and the Bryant HUBGFRTRW is a commercial-grade tamper-resistant GFCI at 125VAC covering 15A to 20A.
5) What is a comparable 20A self-test GFCI receptacle to the Pass & Seymour 2087 from another brand?
The Bryant GFRSTW is a commercial-grade self-test GFCI receptacle covering 15A to 20A, which puts it in the same self-test category as the Pass & Seymour 2087 20A, 125V NEMA 5-20R device. The 2087 is built to UL498 and carries cULus listing, and comes in Ivory and Light Almond. The Bryant is listed as commercial grade.
6) Is the Pass & Seymour 2087 suitable for a damp or outdoor location, or is there a weather-resistant alternative?
The Pass & Seymour 2087 is a 20A 125V self-test GFCI specified for kitchen, bath, laundry, and commercial spec-grade circuits. For an opening that needs weather resistance, the Bryant HUBGFRTWBLK is a tamper- and weather-resistant commercial-grade GFCI receptacle at 125VAC in black.
7) What does the red LED on the Pass & Seymour 2087 flashing mean?
It means the device has failed its own test and should be replaced. The 2087 runs an automatic self-test every three seconds and flashes the red LED trip indicator if the GFCI can no longer provide ground-fault protection. On top of that, SafeLock Protection disconnects power to the receptacle outright if critical internal components are damaged, so a dead face is also a replace-it signal, not a tripped breaker.
8) Will the 2087 GFCI trip on a tool that draws briefly at startup, and how fast does it trip on a real fault?
It is a Class A GFCI with a trip threshold of 5 +/- 1 mA and a nominal trip time of 0.025 second per UL standard, so it responds to ground-fault current, not to inrush. It is also rated as a 1-1/2 HP motor control switch and carries a 10kA short circuit rating, which is why it gets used on motor control switching as well as general receptacle circuits.
9) I need a GFCI for a patient care area. Is the 2087 acceptable?
No. The 2087 is spec grade, not hospital grade. For patient care spaces where hospital-grade receptacles are required, use a hospital-grade GFCI such as the Leviton GFNT1-HG, or the GFNT1-HGI if you need it in ivory.
10) Should I buy a 20A GFCI like the 2087 or a 15A one?
Match the device to the branch circuit. The 2087 is 20A with a NEMA 5-20R face (the T-slot neutral that accepts 20A plugs), which is what a 20A circuit calls for. On a 15A circuit a 15A device is the correct choice, such as the Leviton SmartlockPro self-test GFCI in 15A 125V. Dropping a 15A receptacle on a 20A multi-outlet circuit is a different allowance than using a 20A device, so size it off the breaker and conductor you actually have.
11) Will the 2087 GFCI fit in a shallow or crowded existing box, and does it need a separate ground jumper?
The 2087 uses a high-impact thermoplastic housing with an extra-long strap for secure box mounting, and it includes an Auto-Ground clip that bonds the device to a grounded metal box without a separate jumper. Test and reset buttons work in both directions, which helps when the device ends up mounted sideways or upside down in a crowded multi-gang.
12) What colors does the Pass & Seymour 2087 GFCI come in, and what is the part number for each?
Two colors: Ivory as 2087-I and Light Almond as 2087-LA. Electrical performance is identical between them, so the choice is purely matching existing device and plate finishes on the rest of the building.
13) What voltage range will the 2087 GFCI tolerate on a long or lightly sagging circuit?
Supply voltage range is 102 to 132 VAC on a 125V nominal rating, so normal line variation on a long run will not take it out of spec.
14) What is the difference between the Pass & Seymour 2087 and the Leviton GFNT1-DIN?
Both are GFCI duplex receptacle devices, but the Leviton GFNT1-DIN belongs to the GFNT1 series, while the Pass & Seymour 2087 is a 20A 125V spec-grade self-test device with a NEMA 5-20R face, side or back wiring for #10-#14 AWG copper, and SafeLock protection, offered in Ivory and Light Almond.
How fast can I get the Pass & Seymour 2087-I delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour 2087-I come with a warranty?
Absolutely. The Pass & Seymour 2087-I is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour 2087-I?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour 2087-I from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!