You may also like
Pass & Seymour 8301RED 20A 125V Hospital-Grade Single Receptacle, Red
Model: PSE-8301-RED
Pass & Seymour 8301RED 20A 125V Hospital-Grade Single Receptacle, RedThe Pass & Seymour 8301RED is a 20A 125V heavy-duty, hospital-grade single receptacle finished in red with back and side wire...
Pass & Seymour
$87.11
$41.57
Pass & Seymour 20A 125V Hospital-Grade Straight Blade Plug
The Pass & Seymour 20A, 125V Extra-Hard Use Hospital-Grade Straight Blade Plug is a 2-pole, 3-wire device built for demanding healthcare and industrial environments where dependable, code-compliant power connections are essential. Constructed with a durable nylon housing and heavy-duty brass alloy blades and contacts, this plug is Federal Spec Listed and cULus Listed, meeting the strict performance standards required of hospital-grade electrical devices.
Key Features
- Electrical Rating: 20A, 125V, 2-pole 3-wire configuration for extra-hard use applications.
- Tri-Drive Assembly Screws: Standard on Hospital Grade plugs and connectors for secure, professional-grade assembly.
- Recessed Cord-Grip Screws: Protect installers against screwdriver head slippage during termination.
- Durable Nylon Housing: Provides impact and chemical resistance for long service life in demanding settings.
- Heavy-Duty Brass Alloy Blades and Contacts: Resist heat rise and provide excellent conductivity.
- Same-Plane Terminals: All 3-wire terminals located on the same plane, allowing quick wire termination from any angle.
- Rugged Two-Piece Cord Grip: Provides more uniform cord retention for a secure connection.
- Internal Dust Shield: Keeps terminals free of contaminants for reliable long-term performance.
Certifications & Compliance
- Federal Spec Listed
- cULus Listed
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Hospital and Healthcare Facility Power Connections
- Patient Care Area Equipment Cords
- Commercial and Industrial Extra-Hard-Use Cordsets
- Medical Equipment Replacement Plugs
- Facilities Requiring Federal Spec and cULus Listed Devices
Why Pass & Seymour?
Pass & Seymour hospital-grade devices are engineered with rugged nylon housings, heat-resistant brass alloy contacts, and tri-drive assembly screws to deliver the reliability that healthcare and industrial environments demand. Backed by Federal Spec and cULus listings, this plug arrives ready-to-wire, helping electricians complete code-compliant installations with confidence and efficiency.
Manufacturer Resources
Spec Sheet
Product Specs
- list_batch:
- PASS-20260820
- Product Type:
- Straight Blade Plug
- Voltage Rating:
- 125V
- Amperage Rating:
- 20A
- Configuration:
- 2-Pole 3-Wire
- Listing:
- cULus
- Standards:
- Federal Spec Listed
- Product Material:
- Nylon
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Plugs & Connectors
Pass & Seymour PS5366-XHG – Frequently Asked Questions
1) Will the Pass & Seymour PS5366-XHG plug fit a 20A 125V hospital receptacle?
Yes. The PS5366-XHG is a 20A, 125V, 2-pole 3-wire straight blade plug, which is the NEMA 5-20P pattern used on 20A 125V hospital-grade receptacles. The 5-20P has one horizontal (T-slot) blade, so it will not go into a straight 15A-only 5-15R receptacle.
2) Is this plug acceptable for patient care areas, or do I need a different grade?
It is a hospital-grade device, Federal Spec Listed and cULus Listed, and intended for patient care area equipment cords and medical equipment replacement plugs. That is the grade inspectors look for on cords serving patient care spaces.
3) What is the closest hospital-grade equivalent to the Pass & Seymour PS5366-XHG 20A plug from another brand?
The Pass & Seymour PS5366-XHG is a 20A, 125V, 2-pole 3-wire hospital-grade straight blade plug with a nylon housing. The closest hospital-grade peers at the 20A 125V configuration are the Leviton 8315-CT, a tamper-resistant hospital-grade plug in NEMA 5-20P, and the Bryant 8395T, an angle-body hospital-grade plug in NEMA 5-20P. The Leviton 8315-CT is supplied as a pack of 100, and the Bryant uses an angled body rather than a straight one, so the match on configuration is closer than the match on packaging or body style.
4) Which hospital-grade plug should I use if the cord only needs 15A instead of 20A?
The Pass & Seymour PS5366-XHG is rated 20A at 125V, which carries the 5-20P blade pattern and will not enter a 15A receptacle. For a 15A 125V cordset, the hospital-grade options are the Bryant 8266T in NEMA 5-15P and the Leviton 8215-CAT, a tamper-resistant hospital-grade NEMA 5-15P supplied in packs of 100. Both keep the hospital-grade designation; only the amperage and blade pattern change.
5) Is the Eaton Arrow Hart AH5266 a substitute for the Pass & Seymour PS5366-XHG?
No. The Eaton Arrow Hart AH5266 Ultra Grip is a 15A 125V industrial specification grade straight blade plug, while the Pass & Seymour PS5366-XHG is a 20A 125V hospital-grade device that is Federal Spec Listed and cULus Listed. The amperage differs and the Eaton is not a hospital-grade device, so it cannot be used where a patient care area cord requires hospital grade.
6) Is this an extra-hard-use plug suitable for equipment cords that get dragged around?
Yes, it is built for extra-hard use. The body is nylon for impact and chemical resistance, the blades and contacts are heavy-duty brass alloy to resist heat rise, and a two-piece cord grip holds the cable with more uniform retention. An internal dust shield keeps the terminals clean in service.
7) How hard is this plug to wire in the field?
All three terminals sit on the same plane, so you can land the hot, neutral and ground from any angle without rotating the body. The cord-grip screws are recessed to keep the screwdriver from slipping off, and assembly uses tri-drive screws, standard across Pass & Seymour hospital-grade plugs and connectors.
8) What should I order if the equipment runs on 250V rather than 125V?
The Pass & Seymour PS5366-XHG is a 125V, 2-pole 3-wire plug and will not serve a 250V circuit. For a 250V single-phase 2-pole 3-wire cord, the Leviton 5666-C is a polarized industrial grade straight blade plug rated 250 volts, 1-phase. It is an industrial grade device, not hospital grade, so confirm the grade your facility specification calls for before substituting.
9) I need a hospital-grade plug for a wet or washdown location - what do I use instead of the PS5366-XHG?
The Pass & Seymour PS5366-XHG is an extra-hard-use hospital-grade plug with a nylon housing and internal dust shield, but it is not a watertight device. For a wet location, the Bryant 8666TSP is a watertight hospital-grade plug in NEMA 6-15P. Note that 6-15P is a 250V configuration, so it is a different circuit than the 125V PS5366-XHG serves.
10) If my facility requires tamper-resistant hospital-grade plugs, does the Pass & Seymour PS5366-XHG qualify?
The Pass & Seymour PS5366-XHG is an extra-hard-use hospital-grade plug with tri-drive assembly screws, recessed cord-grip screws and a nylon housing, Federal Spec Listed and cULus Listed. If the specification specifically calls out tamper resistance, the Leviton 8315-CT is a tamper-resistant hospital-grade plug in NEMA 5-20P and the Leviton 8215-CAT is the tamper-resistant NEMA 5-15P version; both ship in packs of 100.
11) Can I standardize on this plug across a facility, or is it only for healthcare?
It works beyond healthcare. Besides hospital and patient care equipment cords, it is intended for commercial and industrial extra-hard-use cordsets and for facilities that require Federal Spec and cULus Listed devices, so a single part number can cover both clinical and shop cords at 20A 125V.
12) Where is the Pass & Seymour PS5366-XHG made, and what part number do I order?
Order it as Pass & Seymour PS5366-XHG, the 20A 125V hospital-grade straight blade plug. Country of origin is Mexico.
13) Which plug do I need for a 50A range or welder cord - is the PS5366-XHG an option?
No. The Pass & Seymour PS5366-XHG is a 20A 125V device and is far below a 50A cord application. For that service the Bryant 7516NC is a rubber-bodied plug in the NM10-50P series. It is a different configuration entirely and is not a hospital-grade device.
How fast can I get the Pass & Seymour PS5366-XHG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PS5366-XHG come with a warranty?
Absolutely. The Pass & Seymour PS5366-XHG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PS5366-XHG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PS5366-XHG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.