Pass & Seymour 2621 20A 120V/2...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$14.84
Pass & Seymour 2621 20A 120V/277V Single Pole Specification Grade Decorator Paddle Switch

Pass & Seymour 2621 20A 120V/277V Single Pole Specification Grade Decorator Paddle Switch

(No reviews yet) Write a Review

Model: 2621-I

In Stock (leaves warehouse same day if ordered before 3pm ET)

$14.84
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour 2621I Specification Grade Single Pole Decorator Paddle Switch, Ivory

The Pass & Seymour 2621I is a 20A 120V/277V Specification Grade single pole decorator paddle switch finished in Ivory. Built with a cushioned thermoplastic paddle and a single rocking butterfly contact design, this switch delivers smooth, quiet, long-term operation with fewer moving parts than conventional toggle switches. It is CSA Listed, UL Listed, and cULus Listed for use in commercial and residential electrical systems requiring specification-grade reliability.

Key Features

  • Electrical Rating: Rated 20A at 120V/277V for specification-grade switching applications.
  • Quiet Operation: Cushioned thermoplastic paddle assures smooth, quiet, long-term operation.
  • Durable Contact Design: Unique single rocking butterfly contact provides long-term consistent performance with significantly fewer moving parts.
  • Wiring Flexibility: Internal screw-pressure-plate back and side wire capability for easy installation with #14 - #10 stranded or solid copper/copper clad wire.
  • Ready-to-Install: All terminal screws backed out, ready-to-install.
  • High-Conductivity Terminals: Terminals made of high conductivity brass and serrated for maximum wire gripping.
  • Reliable Contacts: Silver alloy contacts integrally formed to the butterfly actuator assures reliable performance.
  • Impact-Resistant Body: Impact-resistant polycarb back body and frame with tri-drive ground, terminal, and mounting screws.
  • Grounding: Integral auto-ground clip for positive ground to metal boxes.

Certifications & Compliance

  • CSA Listed
  • UL Listed
  • cULus Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Height: 4.2 in
  • Product Line: Pass & Seymour
  • Product Width: 1.3 in
  • Product Depth: 1.06 in

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Specification-Grade Lighting Control Circuits
  • Office, Retail, and Institutional Buildings
  • Renovation and New Construction Wiring
  • Single Pole Switching Applications at 120V/277V

Why Pass & Seymour?

Pass & Seymour builds the 2621I with a silver alloy butterfly contact, brass terminals, and an impact-resistant polycarb body to deliver dependable, code-compliant performance. Backed by CSA, UL, and cULus listings, this specification-grade decorator switch is engineered for the durability and consistency professional electricians demand.

Manufacturer Resources

Spec Sheet

Product Specs

Listing:
cULus
Department:
Electrical
Product Group:
Wiring Devices
Product Finish:
Matte
Amperage Rating:
20A
Product Type:
Decorator Rocker Switch
Product Subgroup:
Rocker Switches
Product Height:
4.2 in
Product Width:
1.3 in
Product Depth:
1.06 in
Product Material:
Thermoplastic

Pass & Seymour 2621-I – Frequently Asked Questions

1) Will the Pass & Seymour 2621 paddle switch work on a 277V lighting circuit?
Yes. The 2621 decorator paddle switch is rated 20A at both 120V and 277V, so it can be used on 277V commercial lighting branch circuits as well as standard 120V residential and office circuits. It is a single pole switch, so it controls a load from one location only; a three-way location needs a different device.
2) What wire size and gauge can I land on the 2621 switch terminals?
The 2621 takes #14 through #10 copper or copper-clad wire, stranded or solid, using internal screw-pressure-plate terminals that accept either back wiring or side wiring. Terminals are high conductivity brass and serrated to grip the conductor. All terminal screws ship backed out, so you are not spending time on the ladder opening screws before you land conductors.
3) Can I replace an old noisy toggle switch with the 2621 paddle switch?
Yes, for a single pole location. Wiring is the same (line, load, ground), and the cushioned thermoplastic paddle with its rocking butterfly contact runs quieter than a conventional toggle because there are far fewer moving parts. You will need to swap the wallplate to a decorator opening, since the paddle will not fit a toggle plate.
4) Do I need a separate ground pigtail when installing the 2621 in a metal box?
No pigtail is required for a metal box. The 2621 has an integral auto-ground clip that grounds the device through the mounting strap and screw to the metal box. If you are mounting to a nonmetallic box, bond the green terminal screw to the circuit equipment ground as usual.
5) Is the Pass & Seymour 2621 a spec grade switch or a residential grade one?
Specification grade. The 2621 uses a silver alloy contact integrally formed to a single rocking butterfly actuator, brass serrated terminals, and an impact-resistant polycarbonate back body and frame with tri-drive screws. That construction is what separates it from residential grade devices in offices, retail, schools and other high-traffic switching locations.
6) Is the 2621 paddle switch UL listed for commercial use?
The 2621 carries CSA, UL, and cULus listings, which is what inspectors and institutional specs typically call for on commercial lighting control circuits.
7) What colors does the Pass & Seymour 2621 decorator switch come in, and will it match my existing decorator plates?
Two colors: ivory (2621-I) and white (2621-W). The finish is matte, so it blends with standard matte decorator wallplates rather than gloss ones. Being a decorator style device, it needs a rectangular decorator/Decora opening wallplate, not a toggle plate.
8) How big is the 2621 switch body, and will it fit in a shallow old-work box?
The device measures 4.2 in high, 1.3 in wide, and 1.06 in deep. That 1.06 in body depth is the number to check against a shallow retrofit box once your conductors are folded in.
9) Where is the Pass & Seymour 2621 switch made?
The 2621 is manufactured in Mexico. That matters for buyers tracking country of origin on government or institutional purchase orders.
How fast can I get the Pass & Seymour 2621-I delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour 2621-I come with a warranty?
Absolutely. The Pass & Seymour 2621-I is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour 2621-I?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour 2621-I from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!