Pass & Seymour 4155 Candelabra...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$36.64
Pass & Seymour 4155 Candelabra Base Lampholder, Phenolic Body, Black

Pass & Seymour 4155 Candelabra Base Lampholder, Phenolic Body, Black

(No reviews yet) Write a Review

Model: PSE-4155

In Stock (leaves warehouse same day if ordered before 3pm ET)

$36.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour 4155 Candelabra Base Lampholder, Phenolic Body, Black

The Pass & Seymour 4155 Candelabra Base Lampholder is a one-piece candle socket designed for reliable incandescent candelabra base lighting applications. Featuring a durable phenolic body in Black with a convenient bottom turn knob, this lampholder is rated 250V and 660W for dependable performance and is built to a time-tested design that is RoHS Compliant for environmentally responsible use in fixtures, chandeliers, and decorative lighting throughout residential and light commercial spaces.

Key Features

  • One-Piece Design: Candelabra base candle socket with a bottom turn knob for simple lamp installation and removal without additional hardware.
  • Durable Construction: Molded phenolic body resists heat and wear for long-term reliability in everyday lighting fixtures.
  • Electrical Rating: Rated 250V and 660W to support standard incandescent candelabra base lighting loads in residential and light commercial fixtures.
  • Finish: Black housing for a clean, unobtrusive appearance that blends into most fixture designs.
  • Compact Dimensions: 4.375" height and 2.75" diameter for easy fit inside standard candelabra lighting fixtures and lamp bases.
  • Time-Tested Design: Quality materials and proven construction built for durability in everyday lighting use.

Certifications & Compliance

  • RoHS Compliant

Technical Specifications

  • cULus: No
  • CUL Listing No: No
  • Watts: 660
  • UL Listing No: Yes
  • CSA Listing Info: Yes
  • RoHS: Yes
  • Buy American Act Status: No
  • cURus: No
  • UR: No
  • Federal Spec: No

Typical Applications

  • Decorative Candelabra Light Fixtures
  • Chandeliers and Wall Sconces
  • Residential Lighting Repair and Replacement
  • Light Commercial Lighting Installations
  • Incandescent Candelabra Base Lamp Sockets
  • New Construction and Renovation Lighting Projects

Why Pass & Seymour?

Pass & Seymour builds the 4155 Candelabra Base Lampholder with quality materials and a durable phenolic body engineered for lasting performance under everyday use. This time-tested, one-piece design with a bottom turn knob delivers dependable candelabra base lighting support while remaining RoHS Compliant, making it a solid choice for professional electrical and lighting installations that demand consistent, code-conscious performance.

Manufacturer Resources

Product Specs

list_batch:
PASS-20260820
Product Type:
Lampholder
Voltage Rating:
250V
Product Wattage:
660W
Standards:
RoHS Compliant
Product Material:
Phenolic
Product Color:
Black
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Lampholders & Sockets

Pass & Seymour PSE-4155 – Frequently Asked Questions

1) Will the 4155 candelabra socket fit inside my existing chandelier arm or lamp base?
The 4155 measures 4.375 inches high and 2.75 inches in diameter. Measure the cavity or candle cover you are fitting it into before ordering, because that diameter is what usually decides it in a tight chandelier arm or a narrow candle sleeve.
2) Can I use the 4155 as a drop-in replacement for a burned-out chandelier socket?
That is its main use. The 4155 is a one-piece candelabra candle socket intended for repair and replacement in chandeliers, wall sconces and decorative fixtures. Match the candelabra base, confirm the 2.75 inch diameter and 4.375 inch height clear your fixture, and wire it to the existing leads.
3) What voltage and wattage is the Pass & Seymour 4155 candelabra socket rated for?
250 volts and 660 watts. That covers standard incandescent candelabra lamps in residential and light commercial fixtures with plenty of headroom, and it is well above anything an LED or CFL candelabra lamp will draw, so lamp type is not a limiting factor on the rating.
4) What does the bottom turn knob on the Pass & Seymour 4155 do?
It is the on/off control built into the base of the socket, so the lamp is switched at the holder itself rather than needing a separate line switch. Useful on individual sconces and decorative fixtures where you want local control; if your fixture is already switched upstream, you can simply leave the knob in the on position.
5) Is the Pass & Seymour 4155 lampholder RoHS compliant for a spec job?
Yes, the 4155 is listed as RoHS compliant. Note it is manufactured in China, so it does not meet Buy American requirements if your project carries a domestic sourcing clause.
6) Is the phenolic body on this lampholder going to handle the heat from an incandescent lamp?
Phenolic is the thermoset material used for lamp sockets precisely because it resists heat and will not soften the way a thermoplastic can. The 4155 uses a molded phenolic body and is rated to 660 watts, which is the normal combination for incandescent candelabra service.
7) What color is the Pass & Seymour 4155 and does it matter in an exposed fixture?
Black. In an open chandelier arm or an exposed sconce the socket is visible, and black reads as shadow against most metal finishes. If your fixture uses candle covers or sleeves, the body is hidden and color is irrelevant.
How fast can I get the Pass & Seymour PSE-4155 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PSE-4155 come with a warranty?
Absolutely. The Pass & Seymour PSE-4155 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PSE-4155?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PSE-4155 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!