Pass & Seymour CRB5262I Commer...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$58.66
$9.69
Pass & Seymour CRB5262I Commercial Spec-Grade Duplex Receptacle, 15A 125V, Ivory

Pass & Seymour CRB5262I Commercial Spec-Grade Duplex Receptacle, 15A 125V, Ivory

(No reviews yet) Write a Review

Model: CRB5262-I

In Stock (leaves warehouse same day if ordered before 3pm ET)

$58.66
$9.69
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour CRB5262I Commercial Spec-Grade Duplex Receptacle, 15A 125V, Ivory

The Pass & Seymour CRB5262I is a 15A 125V commercial spec-grade duplex receptacle finished in Ivory, built for back and side wire installation in commercial and industrial branch circuits. It features 8-hole internal screw-pressure-plate back wire terminals that accept #10 - #14 AWG solid or stranded copper or copper-clad conductors, plus an easily accessed break-off connecting tab for fast split-circuit wiring. The receptacle is cULus Listed for dependable, code-compliant performance.

Key Features

  • Back and Side Wire Terminals: 8-hole internal screw-pressure-plate back wire terminals accept #10 - #14 AWG solid or stranded copper or copper-clad conductors for flexible termination.
  • Split-Circuit Wiring: Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
  • Isolated Terminal Compartments: Terminal compartments are isolated from each other for positive conductor containment.
  • Temperature Rise Rating: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current with direct current.
  • Operating Temperature Range: Maximum continuous +60°C, minimum -40°C without impact.
  • Durable Construction: Impact-resistant nylon face and thermoplastic back body for long-term durability.
  • Corrosion-Resistant Strap: Plated steel strap locked in to face and back body to resist pulling away from the face/body assembly.
  • Auto-Ground Clip: Assures positive grounding for safe, reliable connections.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Height: 2.635 in
  • Product Line: Pass & Seymour
  • Product Width: 1.322 in
  • Product Depth: 0.78 in

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Duplex Receptacle Branch Circuit Wiring
  • Split-Circuit Wiring Applications
  • Renovation and New Construction Projects

Why Pass & Seymour?

Pass & Seymour builds the CRB5262I with an impact-resistant nylon face, thermoplastic back body, and a corrosion-resistant plated steel strap for long-term reliability in demanding commercial environments. The isolated terminal compartments, auto-ground clip, and cULus Listed rating help ensure safe, code-compliant performance on every installation.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Duplex Receptacle
Product Color:
Ivory
Voltage Rating:
125V
Amperage Rating:
15A
Connection Type:
Back and Side Wire
Listing:
cULus
Product Finish:
Matte
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Receptacles & Outlets
Product Depth:
0.78 in
Product Height:
2.635 in
Product Width:
1.322 in

Pass & Seymour CRB5262-I – Frequently Asked Questions

1) What wire sizes will the Pass & Seymour CRB5262I receptacle accept, and can I back-wire it?
The CRB5262I takes #10 through #14 AWG solid or stranded copper or copper-clad conductors. It has 8-hole internal screw-pressure-plate back wire terminals plus side screws, so you can back-wire or side-wire it depending on how much box space you have. The terminal compartments are isolated from each other, which keeps strands from wandering between poles.
2) Can I use this receptacle for a split-circuit outlet with two separate hot feeds?
Yes. The CRB5262I has a break-off, line-contact connecting tab on the hot side that you snap out to separate the two halves. That lets you feed the top and bottom from different circuits, or switch one half and leave the other always hot. No extra parts needed, just break the tab before terminating.
3) Is a 15A receptacle enough, or do I need a 20A device on my branch circuit?
The CRB5262I is rated 15A at 125V. On a 20-amp branch circuit feeding multiple outlets, code permits 15A receptacles, but if you need a single receptacle on a dedicated 20A circuit or want the T-slot 5-20R face for 20A plugs, go to a 20-amp device instead. ZenSupply carries the Leviton 5362-E specification grade 20A 125V NEMA 5-20R and the Eaton BR20W commercial spec grade 20A/125V for that case.
4) Is this receptacle approved for a commercial job, and is it UL listed?
The CRB5262I is cULus Listed, so it carries both US and Canadian listing for commercial and industrial branch circuit use. It is a commercial spec-grade device, not residential grade, which is what most commercial specs and inspectors expect on tenant and common-area circuits.
5) What do I order instead if the job calls for tamper-resistant or hospital grade receptacles?
The CRB5262I is a standard commercial spec-grade duplex with no tamper-resistant shutters. For areas where TR is required, such as dwelling units and child-occupied spaces, the Eaton TRBR15W-BXSP is a 15A tamper-resistant commercial spec grade device. For patient care areas needing hospital grade, the Leviton 8300-IGW is a hospital grade narrow body impact-resistant duplex.
6) Will the CRB5262I ivory match the other ivory devices and plates in my building?
It is ivory with a matte finish, so it sits with standard ivory wiring devices and ivory wallplates rather than the glossier older ivory. The nylon face is impact resistant, which matters on corridor and tenant-space outlets that take abuse from vacuums and carts. Note that the comparable commercial devices we stock in this class, like the Eaton BR20W and Eaton TRBR15W-BXSP, are white, so do not mix them in on the same wall if finish consistency matters.
7) Do I still need to run a ground pigtail to the box, or does this one self-ground?
The CRB5262I has an auto-ground clip on the mounting strap, which bonds the device to a grounded metal box through the mounting screw. Pull a ground conductor to the device anyway where the box is nonmetallic or not bonded. The strap is plated steel locked into both the face and the back body so it does not pull away from the assembly during tight installs.
8) Can this receptacle go in an unheated garage, warehouse, or loading dock?
Operating range on the CRB5262I is a maximum continuous +60 C and a minimum of -40 C without impact, so unconditioned warehouse, dock, and garage interiors are within its range. It also holds a maximum 30 C temperature rise at full rated current after 50 cycles of overload at 150 percent of rated current with direct current. It is not a weather-resistant or outdoor-rated device, so wet and damp locations need an appropriate WR device and enclosure.
9) How is this different from a residential grade 15A outlet like the Leviton 12650W?
Both are 15A 125V duplex receptacles, but the CRB5262I is built to commercial spec grade: nylon impact-resistant face, thermoplastic back body, plated steel strap, isolated terminal compartments, and 8-hole pressure-plate back wire terminals that take up to #10 AWG. The Leviton 12650W is a residential grade impact-resistant NEMA 5-15R device. On apartment turnovers and light residential work the residential device is the usual choice; on commercial branch circuits, specs normally call for the spec-grade device.
10) What is a lower-cost alternative to the CRB5262I for apartment turns?
If the circuit is 15A 125V and the spec does not call for commercial grade, the Leviton 12650W is a residential grade impact-resistant straight-blade duplex receptacle, 15A 125V NEMA 5-15R - same amperage and voltage class as the CRB5262I at a residential grade. The CRB5262I remains the choice where a commercial spec-grade device is required, and it adds 8-hole back wire terminals accepting #10 to #14 AWG plus a break-off tab for split-circuit wiring.
11) How does the CRB5262I compare with the Leviton 5362-E for a heavy-use shop circuit?
The CRB5262I is a commercial spec-grade 15A 125V device with an impact-resistant nylon face, thermoplastic back body, and plated steel strap, rated for continuous operation to +60 C and down to -40 C. The Leviton 5362-E is an industrial specification grade extra heavy-duty straight blade duplex rated 20A 125V with a NEMA 5-20R face. For a 20A shop circuit with high plug cycling, the 5362-E is the industrial-grade device; the CRB5262I fits 15A commercial branch circuits.
12) I need to match ivory devices already installed - do the alternatives come in ivory?
The CRB5262I is ivory with a matte finish. The comparable commercial 15A and 20A devices run other colors: the Eaton BR20W and Eaton TRBR15W-BXSP are white, and the Leviton 16352 is gray. If the facility is standardized on ivory faces, the CRB5262I is the device that matches.
13) Can I use a narrow body receptacle like the Leviton 8300-IGW where the CRB5262I will not fit the box?
The Leviton 8300-IGW is a narrow body impact-resistant duplex receptacle, which is the configuration used where box fill or conductor crowding is tight; it is a hospital grade device. The CRB5262I is a standard commercial spec-grade duplex, 2.635 in high, 1.322 in wide and 0.78 in deep, with isolated terminal compartments and 8-hole back wire terminals. Confirm your box depth against those dimensions before substituting.
14) What are the dimensions of the CRB5262I body for tight box fits?
Measured 2.635 in height, 1.322 in width, and 0.78 in depth. The shallow 0.78 in body depth helps in shallow boxes and in boxes already crowded with conductors, though back-wiring it rather than side-wiring keeps the wire bundle tighter still.
How fast can I get the Pass & Seymour CRB5262-I delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour CRB5262-I come with a warranty?
Absolutely. The Pass & Seymour CRB5262-I is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour CRB5262-I?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour CRB5262-I from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!