You may also like
Pass & Seymour Gangable Wall Plate Gasket
The Pass & Seymour Gangable Wall Plate Gasket is an energy-efficient gasket designed to seal behind wall plates covering Toggle, Duplex, Ground Fault Circuit Interrupter (GFCI), or Blank device configurations. Its gangable construction allows it to adapt across multiple device layouts, making it a versatile solution for reducing air infiltration around switch and receptacle openings. This UL Listed gasket is built with quality materials and a time-tested design for reliable, long-term performance in both residential and commercial electrical installations.
Key Features
- Gangable Design: Fits Toggle, Duplex, Ground Fault Circuit Interrupter, or Blank wall plate configurations for flexible use across device types.
- Energy Efficient: Helps seal gaps around wall plates to reduce drafts and air infiltration at switch and receptacle openings.
- Quality Materials: Constructed for durability to withstand repeated installation and everyday use.
- Time-Tested Design: A proven gasket profile relied on across countless installations.
- UL Listed: Certified to recognized safety standards for use in electrical wall plate applications.
Certifications & Compliance
- UL Listed
Technical Specifications
- Product Line: Pass & Seymour
- Country of Origin: United States
- Packaging: 50 EA
Typical Applications
- Residential and Commercial Wall Plate Installations
- Energy Efficiency and Draft-Sealing Upgrades
- Toggle Switch and Duplex Receptacle Wall Plates
- Ground Fault Circuit Interrupter (GFCI) Wall Plates
- Blank Wall Plate Installations
- Renovation and New Construction Electrical Work
Why Pass & Seymour?
Pass & Seymour backs this Wall Plate Gasket with quality materials, a durable, time-tested design, and UL Listed certification, giving electrical professionals and homeowners a dependable way to improve the seal and energy efficiency of standard wall plate installations.
Manufacturer Resources
Spec Sheet
Product Specs
- list_batch:
- PASS-20260820
- Product Type:
- Wallplate Gasket
- Listing:
- UL Listed
- Country Of Origin:
- United States
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Wallplates
Pass & Seymour GASKET1 – Frequently Asked Questions
1) Will the Pass & Seymour GASKET1 wall plate gasket work behind a GFCI plate, or is it only for toggle switches?
It covers both. The GASKET1 gangable gasket is made to seal behind wall plates for toggle switch, duplex receptacle, GFCI, or blank device openings, so one part number handles the common device layouts on a job instead of stocking a separate gasket per device type.
2) What does gangable mean on a wall plate gasket, and can I use it on a two- or three-gang plate?
Gangable means the gasket profile is built to adapt across multiple device layouts rather than being cut for a single opening, so it can be used behind multi-device wall plate configurations covering toggle, duplex, GFCI, or blank devices. It is not a fixed single-gang-only part.
3) How many wall plate gaskets come in a pack of Pass & Seymour GASKET1?
GASKET1 is packaged 50 each, which is how it is normally bought for multi-family or commercial retrofit work where you are sealing dozens of openings in one pass. For a single-unit repair you will still receive the 50-count pack.
4) Do foam wall plate gaskets actually help with drafts in an older building?
That is the purpose of this one. The GASKET1 gasket sits between the device box and the wall plate to close the gap around switch and receptacle openings, cutting air infiltration through the wall cavity at those penetrations. It is a low-cost line item on weatherization and draft-sealing upgrades, and it installs at the same time you are changing plates.
5) Can I install the Pass & Seymour gasket on existing outlets without rewiring?
No rewiring needed. The gasket goes behind the wall plate, so installation is remove the plate, set the gasket over the device, and reinstall the plate on the existing screws. It works the same on new construction and on renovation or retrofit work.
6) What is the exact part number to order for the Pass & Seymour gangable wall plate gasket?
Order it as Pass & Seymour GASKET1. That is the manufacturer part number, and it is the single model offered for this gangable gasket, so there are no size, color, or device-specific variants to specify.
How fast can I get the Pass & Seymour GASKET1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour GASKET1 come with a warranty?
Absolutely. The Pass & Seymour GASKET1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour GASKET1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour GASKET1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.