Pass & Seymour Heavy-Duty Spec...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$45.50
Pass & Seymour Heavy-Duty Spec-Grade Duplex Receptacle, 20A 125V

Pass & Seymour Heavy-Duty Spec-Grade Duplex Receptacle, 20A 125V

(No reviews yet) Write a Review

Model: PS5362

In Stock (leaves warehouse same day if ordered before 3pm ET)

$45.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour PS5362W Heavy-Duty Spec-Grade Duplex Receptacle, 20A 125V, White

The Pass & Seymour PS5362W is a 20A 125V heavy-duty spec-grade duplex receptacle finished in white, engineered for demanding commercial and industrial wiring applications. It features back and side wire terminals that accept #14 and #10 AWG stranded or solid copper or copper-clad conductors, a high-strength nylon face, and a heavy-duty brass strap for added strength and ground conductivity. The unit is Federal Spec Listed and cULus Listed, making it a reliable choice for code-compliant professional installations.

Key Features

  • Electrical Rating: Rated 20A at 125V for heavy-duty spec-grade receptacle applications.
  • Durable Construction: High-strength nylon face resists impact and wear in demanding environments.
  • Heavy-Duty Brass Strap: Adds mechanical strength and improves ground conductivity.
  • Reinforced Strap Tabs: Wrap around the face to prevent the strap from separating from the face and back body.
  • Back and Side Wire Terminals: Internal screw-pressure-plate design accepts #14 and #10 AWG stranded or solid copper or copper-clad conductors.
  • Split-Circuit Wiring: Easily accessed break-off, line-contact connecting tab for fast, easy split-circuit wiring.
  • Positive Grounding: Auto-ground clip assures a positive ground connection.
  • Temperature Performance: Maximum 30°C temperature rise at full-rated current after 50 cycles of overload at 150% of rated current; operates continuously from -40°C to +60°C.

Certifications & Compliance

  • Federal Spec Listed
  • cULus Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Height: 2.635 in
  • Product Line: Pass & Seymour
  • Product Width: 1.322 in
  • Product Depth: 0.78 in

Typical Applications

  • Commercial and Industrial Electrical Installations
  • Spec-Grade Wiring Device Upgrades
  • Split-Circuit Receptacle Wiring
  • Panelboard-Fed Branch Circuit Outlets
  • Renovation and New Construction Projects

Why Pass & Seymour?

Pass & Seymour builds the PS5362W with a high-strength nylon face and heavy-duty brass strap to withstand demanding professional environments, backed by Federal Spec and cULus Listing for verified code compliance. The reinforced strap tabs and auto-ground clip design deliver dependable, long-lasting performance for electricians who need a receptacle that holds up to heavy-duty commercial and industrial use.

Manufacturer Resources

Spec Sheet

Product Specs

Voltage Rating:
125V
Listing:
cULus
Product Type:
Duplex Receptacle
Department:
Electrical
Product Group:
Wiring Devices
Amperage Rating:
20A
Product Subgroup:
Receptacles & Outlets

Pass & Seymour PS5362 – Frequently Asked Questions

1) What wire sizes do the Pass & Seymour PS5362 back and side terminals accept?
The PS5362 takes #14 through #10 AWG, stranded or solid, copper or copper-clad. The terminals are an internal screw-pressure-plate design, so you can land the conductor in the back wire opening or wrap it on the side screw. That covers a 20A branch circuit on #12 as well as #10 homeruns where voltage drop pushed the wire size up.
2) Is this receptacle approved for federal and commercial jobs that require a listed spec-grade device?
The PS5362 is cULus Listed and Federal Spec Listed, which is what inspectors and government or institutional specs normally call for on a spec-grade 20A 125V duplex.
3) I need a 20A 125V receptacle in a patient care area - can I use the PS5362?
For patient care spaces specify a hospital grade device instead. The Leviton 16262-HGW is a hospital grade duplex receptacle in white, supplied in packs of 100. The Pass & Seymour PS5362 is a heavy-duty spec-grade device with Federal Spec and cULus listing, which suits commercial and industrial work rather than hospital grade requirements.
4) Will the PS5362 work in a hazardous or wet industrial location?
No - it is a general-purpose heavy-duty spec-grade duplex for commercial and industrial interior wiring. For classified areas use a factory-sealed or explosionproof device such as the Appleton U-Line ECS factory-sealed 15 and 20 amp plug and receptacle set, 3-pole, or the Appleton FSQC series interlocked explosionproof receptacle.
5) Can I wire the top and bottom outlets of the PS5362 on separate circuits?
Yes. The receptacle has a break-off line-contact connecting tab on the brass side, so snapping it out isolates the two halves for split-circuit or switched-half wiring. No extra parts needed, just break the tab before you land the two hot conductors.
6) Will a 20A Pass & Seymour PS5362 receptacle work in a metal box without a bonding jumper?
The PS5362 has an auto-ground clip on the mounting strap, which makes a positive ground connection to a grounded metal box through the mounting screw. In nonmetallic boxes or where no grounded metal yoke is present, you still land the equipment grounding conductor on the green screw.
7) Can I use this receptacle in an unheated warehouse or a cold loading dock?
Operating range runs continuously from -40C to +60C, so unconditioned warehouse, dock, and garage locations are within spec. Temperature rise is held to 30C maximum at full rated current after 50 cycles of overload at 150 percent of rating, which is the heavy-use test that separates spec grade from residential devices.
8) Is the PS5362 a direct equivalent to the Bryant 5362B?
They are the same class of device. The Bryant 5362B Series is also a heavy-duty 20A/125V duplex receptacle, and Bryant also offers the 5362BI in that heavy-duty line. If you are standardizing a building on one brand, either is a heavy-duty 20A 125V duplex, so match on color and the grade your spec calls out.
9) What is the difference between this heavy-duty spec-grade receptacle and a commercial grade one?
Grade is about how much abuse the device takes. The PS5362 is heavy-duty spec grade with a nylon face and a heavy-duty brass strap with reinforced tabs wrapped around the face so the strap cannot separate from the body, plus Federal Spec Listing. A commercial grade 20A device such as the Leviton 16352-1PW or the Decora Plus 16342 covers normal office and retail outlets. Pick the heavy-duty device where cords get yanked, carts hit the wall, or the spec names Federal Spec.
10) What 20A 125V option looks like the PS5362 but has a decorator face?
The Leviton 16342 Decora Plus commercial grade duplex receptacle is 20A 125V NEMA 5-20R in white with a decorator-style face, so it takes a decorator wallplate. The Pass & Seymour PS5362 uses a standard duplex nylon face and ships in brown and white.
11) What colors does the Pass & Seymour PS5362 duplex receptacle come in?
Two: brown (PS5362) and white (PS5362-W). Both are the same 20A 125V heavy-duty device with a matte nylon face, so you can match brown devices on an older building and white on newer work without changing grade.
12) What is the difference between the PS5362 and a commercial grade receptacle like the Leviton 16251W?
The Leviton 16251W is a commercial grade heavy-duty impact-resistant straight blade receptacle, and the Eaton 816W-BOX is a commercial specification grade single receptacle rated 15A. The Pass & Seymour PS5362 is a heavy-duty spec-grade 20A 125V duplex with a high-strength nylon face, heavy-duty brass strap, auto-ground clip, and Federal Spec plus cULus listing.
13) I need a single outlet rather than a duplex at 20A - what instead of the PS5362?
Look at the Eaton 6450W, a heavy-duty industrial specification grade decorator single receptacle that takes #14-10 AWG conductors - the same wire range the Pass & Seymour PS5362 accepts at its back and side terminals. The PS5362 itself is a two-outlet duplex.
How fast can I get the Pass & Seymour PS5362 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PS5362 come with a warranty?
Absolutely. The Pass & Seymour PS5362 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PS5362?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PS5362 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!