Pass & Seymour PS20AC3I Indust...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$114.20
$71.86
Pass & Seymour PS20AC3I Industrial Extra Heavy Duty Specification Grade Switch, Ivory

Pass & Seymour PS20AC3I Industrial Extra Heavy Duty Specification Grade Toggle Switch, Ivory

(No reviews yet) Write a Review

Model: PS20AC3-I

In Stock (leaves warehouse same day if ordered before 3pm ET)

$114.20
$71.86
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour PS20AC3I Industrial Extra Heavy Duty Specification Grade Toggle Switch, Ivory

The Pass & Seymour PS20AC3I is an Industrial Extra Heavy Duty, Specification Grade toggle switch finished in Ivory and built for demanding commercial and industrial duty cycles. It features a heavy-duty, brass alloy, one-piece contact arm that virtually eliminates contact bounce, oversized silver-alloy contacts for long life and better heat dissipation, and side and external screw-pressure-plate back wire terminals accepting #14 - #10 AWG copper or copper-clad wire. The switch is cULus Listed and Federal Spec Listed, making it suitable for applications requiring specification-grade compliance and long-term reliability.

Key Features

  • Wiring: Side and external screw-pressure-plate back wire accepts #14 - #10 AWG copper or copper-clad wire, with a grounding terminal standard on screw-pressure plate back wire.
  • Durable Contact System: Heavy-duty, brass alloy, one-piece contact arm virtually eliminates contact bounce, paired with oversized silver-alloy contacts for long life and better heat dissipation.
  • Grounding: Auto-ground clip assures positive ground for consistent, code-compliant grounding performance.
  • Cover & Toggle: Impact- and chemical-resistant cover with a one-piece toggle molded from chemical-, impact-, and heat-resistant thermoplastic for long-term durability.
  • Body Construction: Glass-reinforced, chemical-resistant thermoplastic back body resists harsh cleaners, with locking support that resists face and back body separation.
  • Strap: One-piece nickel-plated brass strap provides superior corrosion resistance.
  • Operation: Cam control and spring actuator deliver positive makes and breaks, while heavy-duty bumpers ensure quiet, smooth operation.
  • Installation: Shallow design allows for easier installation in existing boxes and tight enclosures.

Certifications & Compliance

  • cULus Listed
  • Federal Spec Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Height: 3.281 in
  • Product Line: Pass & Seymour
  • Product Width: 1.32 in
  • Product Depth: 1.073 in

Typical Applications

  • Industrial and Commercial Electrical Installations
  • Specification-Grade Lighting and Load Switching
  • Heavy-Duty, High-Traffic Switching Applications
  • Facilities Requiring Federal Spec Compliance
  • Renovation and New Construction Wiring Projects

Why Pass & Seymour?

Pass & Seymour engineers the PS20AC3I with a brass alloy one-piece contact arm, oversized silver-alloy contacts, and a glass-reinforced thermoplastic back body to withstand heavy industrial duty cycles. Backed by cULus Listing and Federal Spec compliance, this Specification Grade toggle switch delivers the reliable, code-compliant performance professional electricians expect from Pass & Seymour.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
3-Way Toggle Switch
Product Color:
Ivory
Product Finish:
Matte
Connection Type:
Screw-Pressure Plate
Listing:
cULus
Standards:
Federal Spec
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Toggle Switches
Product Width:
1.32 in
Product Depth:
1.073 in
Product Height:
3.281 in
Product Material:
Thermoplastic

Pass & Seymour PS20AC3-I – Frequently Asked Questions

1) What wire sizes will the Pass & Seymour PS20AC3I switch accept, and can I back-wire it?
The PS20AC3I takes #14 through #10 AWG copper or copper-clad wire. You can land conductors on the side screws or use the external screw-pressure-plate back wire terminals, so #10 branch circuits in a commercial lighting run are no problem. The grounding terminal comes standard on the screw-pressure plate back wire.
2) Is the Pass & Seymour PS20AC3I approved for a federal or government specification job?
Yes. It is cULus Listed and Federal Spec Listed, which is why it gets written into government, institutional and military facility packages where a commercial-grade device would be rejected on submittal.
3) What is the closest equivalent to the Pass & Seymour PS20AC3I from another manufacturer?
The Leviton 1221 is the nearest match: it is an extra heavy-duty industrial specification grade SPST toggle switch rated 20A at 120/277V, the same specification-grade single-pole class as the PS20AC3I, which is an industrial extra heavy duty specification grade toggle switch in ivory. The Leviton 1221-2KL is also an extra heavy-duty spec grade 1-pole toggle switch at 20A, 120/277V. Confirm the color you need, since the PS20AC3I is supplied in ivory with a matte finish.
4) Does spec grade actually buy me anything over a commercial grade toggle switch?
On a high-cycle opening, yes. The PS20AC3I is an Industrial Extra Heavy Duty, Specification Grade device: brass alloy one-piece contact arm that virtually eliminates contact bounce, oversized silver-alloy contacts for longer life and better heat dissipation, a one-piece nickel-plated brass strap for corrosion resistance, and cam-and-spring actuation for positive makes and breaks. A commercial grade switch like the Bryant 4903 is the lighter-duty answer for a tenant space or office that gets switched a few times a day.
5) Will the PS20AC3I hold up in a kitchen, lab or wash-down area where surfaces get cleaned with harsh chemicals?
It's built for it. The back body is glass-reinforced, chemical-resistant thermoplastic that resists harsh cleaners, the cover is impact- and chemical-resistant, and the one-piece toggle is molded from chemical-, impact- and heat-resistant thermoplastic. Locking support between the face and back body resists separation. The ivory finish is matte rather than gloss, so it does not telegraph scuffs the way a gloss device does.
6) Do I need to run a separate bonding jumper to the switch yoke?
The PS20AC3I has an auto-ground clip that establishes a positive ground through the mounting strap to a grounded metal box, plus a dedicated grounding terminal on the screw-pressure plate back wire. In a plastic box, or any installation where the box is not grounded, land the equipment grounding conductor on that green terminal.
7) I need the same extra heavy duty spec grade switch but in white, or in a three-way. What else is there?
The PS20AC3I is the ivory single device. If you need a different brand or configuration, the Leviton 1221 is an extra heavy-duty industrial specification grade SPST at 20A, 120/277V, and the 1221-2KL is Leviton's extra heavy-duty spec grade 1-pole 20A 120/277V version. For three-way switching, the Eaton Arrow Hart industrial grade three-way runs 20A at 120/277V, and the Bryant 4903W is a 20A 277V three-way in commercial grade. If you want a pilot light on the device, Leviton's 1201PLC and 1221-2L are industrial grade pilot light switches.
8) Can I use the Ideal 774005 heavy-duty toggle switch in place of the PS20AC3I in a wall box?
No - they are different device classes. The PS20AC3I is a wall-box wiring device with side and external screw-pressure-plate back wire terminals accepting #14 to #10 AWG copper or copper-clad wire and an auto-ground clip. The Ideal Industries 774005 is a heavy-duty DPST on-off toggle switch with spade terminals, a panel- or equipment-style switch rather than a strap-mounted wiring device, and it is double-pole rather than single-pole. Use the PS20AC3I or another spec grade wiring device for branch-circuit wall switching.
9) Is there a commercial grade toggle switch I can use in lower-traffic areas instead of the spec grade PS20AC3I?
Yes. The PS20AC3I is built as an industrial extra heavy duty specification grade device with a one-piece brass alloy contact arm and oversized silver-alloy contacts for heavy duty cycles. Where that level is more than the opening needs, the Bryant 4903W is a commercial grade AC toggle switch at 20A 277V, and the Bryant 4801W is a 4-Series single-pole switch rated 15A 277V AC. Note the 4801W is a 15A device, so check your branch circuit and load before substituting it for a 20A switch.
10) My spec calls for a Federal Spec listed switch - which of these qualify?
The Pass & Seymour PS20AC3I is cULus Listed and Federal Spec Listed, which is why it is specified on government and institutional jobs. Among the comparable single-pole devices, the Leviton 1221 and 1221-2KL are extra heavy-duty specification grade 20A 120/277V switches in the same class, while the Eaton Arrow Hart AH-1223GY and Leviton 1201PLC are described as industrial grade. If the drawing calls out Federal Spec by name, the PS20AC3I carries that listing directly.
11) Is a wall plate included with the PS20AC3I switch?
No. The PS20AC3I ships as the device only, so you order the wall plate separately. For a clean match on an ivory device, specify an ivory standard-size toggle plate; most spec jobs call for a smooth nylon or stainless plate depending on the facility standard.
12) Why does contact bounce matter when I'm choosing a switch for a high-traffic corridor?
Contact bounce is what burns up a switch's contacts and shortens its life in an opening that gets operated dozens of times a day. The PS20AC3I uses a heavy-duty brass alloy one-piece contact arm that virtually eliminates it, with oversized silver-alloy contacts to spread heat, plus heavy-duty bumpers for quiet, smooth operation. In a corridor, classroom or stairwell where tenants complain about switch noise, those bumpers are the detail that settles it.
13) Where is the Pass & Seymour PS20AC3I made, and what part number do I put on the purchase order?
Order it as Pass & Seymour PS20AC3I, MPN PS20AC3-I, in ivory. Country of origin is Mexico, which is the detail to confirm against any domestic-content requirement on a federally funded job.
How fast can I get the Pass & Seymour PS20AC3-I delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PS20AC3-I come with a warranty?
Absolutely. The Pass & Seymour PS20AC3-I is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PS20AC3-I?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PS20AC3-I from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!