Pass & Seymour PSL Series Turn...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$26.03
Pass & Seymour PSL Series Turnlok EHU Locking Plug, 15A

Pass & Seymour PSL Series Turnlok EHU Locking Plug, 15A

(No reviews yet) Write a Review

Model: PSL615P

In Stock (leaves warehouse same day if ordered before 3pm ET)

$26.03
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour PSL Series Turnlok EHU Locking Plug

The Pass & Seymour PSL Series Turnlok EHU Locking Plug is a 15A extra-hard use (EHU) locking plug engineered for demanding industrial and job-site cord applications. This PSL Series family is available in two NEMA configurations — NEMA L6-15 at 250V and NEMA L7-15 at 277V — so installers can match the correct locking configuration and voltage to their circuit. Every version features a black back and white front body molded from impact- and corrosion-resistant nylon 6/6, delivering rugged performance backed by cULus Listing for safety compliance.

Key Features

  • Configuration Range: Choose between NEMA L6-15 (250V) and NEMA L7-15 (277V), both rated 15A extra-hard use (EHU) Turnlok locking plugs.
  • Durable Construction: Impact- and corrosion-resistant nylon 6/6 shell material for long service life.
  • Contact Materials: Industrial-strength brass alloy plug blades and connector contacts resist heat rise and provide excellent conductivity.
  • Cord Protection: Integral flexible rubber cord grommet conforms to and seals around SO cord, protecting against oils, water, or chips entering the wiring chamber.
  • Ergonomic Grip: Scallop shell design provides a non-slip gripping surface for insertion and withdrawal, while raised ribs give a non-slip profile for turning to lock and unlock.
  • Visible Ratings: Visible stamped NEMA configuration and device rating for quick field identification on every unit.
  • Ready-to-Wire: Quick-thread assembly screws and cord-grip screws come backed-out and ready-to-wire, with new-design external cord grips providing visible assurance of safe cord retention.
  • Pull-Out Protection: Double dovetail design provides superior protection against cord pull-out forces, and a rounded back contour reduces snags and hang-ups on the job site.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Amperage Rating: 15A across both configurations
  • NEMA Configuration / Voltage Rating: L6-15 – 250V or L7-15 – 277V
  • Body Color: Black Back, White Front
  • Shell Material: Nylon 6/6
  • Country of Origin: Mexico
  • Packaging: 10 EA

Typical Applications

  • Industrial and Commercial Power Distribution
  • Extra-Hard Use (EHU) Cord Sets and Portable Equipment
  • Wet, Damp, and Job-Site Electrical Connections
  • Turnlok Locking Plug and Connector Systems
  • Renovation and New Construction Electrical Work

Why Pass & Seymour?

Pass & Seymour builds the PSL Series Turnlok EHU plug from impact- and corrosion-resistant nylon 6/6 with industrial-strength brass alloy blades and contacts, backed by cULus Listing across both the L6-15 and L7-15 configurations for code-compliant, reliable performance in demanding electrical environments.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
PASS-20260820
Product Type:
Locking Plug
Configuration:
NEMA L615
Voltage Rating:
250V
Amperage Rating:
15A
Listing:
cULus
Country of Origin:
Mexico
Product Material:
Nylon 6/6
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Plugs & Connectors

Pass & Seymour PSL615P – Frequently Asked Questions

1) What's the difference between the PSL615P and PSL715-P Turnlok plugs?
Voltage and blade configuration. The PSL615P is NEMA L6-15 rated 250V, and the PSL715-P is NEMA L7-15 rated 277V. Both are 15A extra-hard-use Turnlok locking plugs with the same nylon 6/6 body. The two configurations are not interchangeable, so match the plug to the receptacle already on the circuit: L6-15 for 240/250V two-pole three-wire runs, L7-15 for 277V lighting circuits common in commercial buildings.
2) Will a NEMA L6-15 plug work in a 277V lighting circuit?
No. The L6-15 configuration is rated 250V, and 277V circuits use the L7-15 blade pattern instead. They are keyed differently on purpose so a 250V device cannot be landed on a 277V circuit. For 277V, order the PSL715-P version of the Turnlok EHU plug.
3) What is a direct equivalent to the Pass & Seymour PSL615P L6-15 locking plug from another brand?
The Leviton 4570-C is the closest match: it is an industrial grade 2-pole locking plug rated 250V, 15A in NEMA L6-15P, the same configuration and rating as the Pass & Seymour PSL615P at 15A, 250V, NEMA L6-15. The Pass & Seymour version is molded from nylon 6/6 with a black back and white front and is cULus Listed, with an integral rubber cord grommet and external cord grips for extra-hard use cord sets. Either one will mate with an existing L6-15 locking receptacle.
4) My cord set needs 20A at 250V instead of 15A - what should I use instead of the PSL Turnlok plug?
Step up to the Leviton industrial grade NEMA L6-20P locking plug, rated 20A 250V. The Pass & Seymour PSL Turnlok EHU plug tops out at 15A, offered in NEMA L6-15 at 250V and NEMA L7-15 at 277V, and an L6-15 plug will not enter an L6-20 receptacle - the blade configurations differ. Match the plug configuration to the receptacle already on the circuit rather than to the cord gauge alone.
5) Is the Bryant 4722N L5-15P plug a substitute for the Pass & Seymour PSL615P?
No. The Bryant 4722N is an angle locking plug in NEMA L5-15P, 15A 125V - a 125V configuration - while the PSL615P is NEMA L6-15 at 250V. The amperage matches at 15A, but L5-15 and L6-15 blades are keyed differently and the voltages are not interchangeable, so the Bryant will not mate with an L6-15 receptacle. Use the Bryant for 125V branch circuits and the Pass & Seymour L6-15 for 250V.
6) Is this locking plug suitable for an SO cord set on a job site?
That is what the PSL Series EHU plug is built for. An integral flexible rubber grommet conforms and seals around SO cord to keep oils, water, and chips out of the wiring chamber, and a double dovetail cord grip resists pull-out. The rounded back contour cuts down on snags when the cord is dragged around a site.
7) Does the Pass & Seymour PSL Turnlok plug carry a UL listing for inspection?
The PSL Series Turnlok EHU locking plug is cULus Listed, which covers both the US and Canadian listings and both the L6-15 and L7-15 configurations. The NEMA configuration and device rating are also stamped visibly on the body, which makes field verification easy during walkthroughs.
8) Will this plug hold up in a damp or wet industrial area?
The shell is nylon 6/6, which is impact and corrosion resistant, and the brass alloy blades resist heat rise. The rubber cord grommet seals the wiring chamber against water and oil ingress, which is why it is specified for wet, damp, and job-site connections. It is a cord-end device, not an enclosure, so the mating receptacle still has to suit the location.
9) For a high-abuse portable tool cord, how does the PSL Turnlok EHU plug compare with an armored or safety-grip plug?
The Pass & Seymour PSL Turnlok EHU plug is an extra-hard use 15A plug with a nylon 6/6 shell, brass alloy blades, an integral rubber cord grommet that seals around SO cord, a scallop shell grip and a double dovetail design for cord pull-out resistance. If the circuit is larger, Eaton offers a Safety Grip locking plug at 20A 120/208V in heavy-duty specification grade, and an Industrial Armored locking plug at 50A 600V/250Vdc with back-wiring in extra heavy duty grade. Choose by the receptacle configuration and amperage on the circuit first, then by the body style your crew prefers.
10) What is the difference between the PSL715-P and a non-metallic locking plug like the Bryant 71020NP?
The Pass & Seymour PSL715-P is a 15A NEMA L7-15 plug rated 277V, built on a nylon 6/6 body with brass alloy blades and cULus Listing, aimed at extra-hard use cord sets. The Bryant 71020NP is a 7 Series non-metallic locking plug. Both avoid a metal shell, but only the PSL715-P is in the L7-15 277V configuration, which is the one that mates with a 277V lighting-circuit locking receptacle.
11) How many of these locking plugs come in a pack?
The PSL Series Turnlok EHU plug is packaged 10 each, so a single pack covers a batch of cord sets rather than one repair. The plugs are made in Mexico.
12) Do I need to disassemble the plug to wire it, or does it come ready to go?
Ready to wire out of the box. Assembly screws and cord-grip screws arrive backed out, and the external cord grips give a visible check that the cord is retained properly once tightened. Raised ribs and the scallop shell profile give a grip for turning it to lock and unlock with gloves on.
How fast can I get the Pass & Seymour PSL615P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PSL615P come with a warranty?
Absolutely. The Pass & Seymour PSL615P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PSL615P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PSL615P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!