Pass & Seymour PSL515P 15A NEM...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$90.80
$45.64
Pass & Seymour PSL515P 15A NEMA L515 Locking Plug, Black/White Nylon Body

Pass & Seymour PSL515P 15A NEMA L515 Locking Plug, Black/White Nylon Body

(No reviews yet) Write a Review

Model: PSL515-P

In Stock (leaves warehouse same day if ordered before 3pm ET)

$90.80
$45.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour PSL515P 15A NEMA L515 Locking Plug, Black/White Nylon Body

The Pass & Seymour PSL515P is a 15A NEMA L515 locking plug built with a black back and white front nylon 6/6 shell for durable, everyday performance. Industrial-strength brass alloy plug blades and connector contacts resist heat rise and deliver excellent conductivity, while the double dovetail design and integral rubber cord grommet guard against cord pull-out and contaminants. Visible stamped NEMA configuration and device rating make field identification fast and reliable on any job site.

Key Features

  • NEMA Configuration: 15A NEMA L515 locking plug with visible stamped NEMA configuration and device rating for easy field identification.
  • Durable Construction: Impact- and corrosion-resistant nylon 6/6 shell material with a black back and white front body.
  • Cord Pull-Out Protection: Double dovetail design provides superior protection against cord pull-out forces.
  • Sealed Cord Grommet: Integral flexible rubber cord grommet conforms to and seals around SO cord, protecting the wiring chamber from oils, water, or chips.
  • Non-Slip Grip: Raised ribs and scallop shell design provide a non-slip gripping profile for turning to lock, unlock, insert, and withdraw.
  • High-Conductivity Contacts: Industrial-strength brass alloy plug blades and connector contacts resist heat rise and provide excellent conductivity.
  • Ready-to-Wire Assembly: Quick-thread assembly screws and cord-grip screws come backed out, ready to wire.
  • Secure Cord Retention: New-design external cord grips provide visible assurance of safe and proper cord retention.

Technical Specifications

  • Country Of Origin: Mexico
  • Product Length: 1.752 in
  • Product Line: Pass & Seymour
  • Product Width: 1.516 in

Typical Applications

  • Industrial and Commercial Power Cord Connections
  • Locking Plug and Connector Assemblies
  • Job Site and Portable Power Equipment
  • Cord Sets Requiring Secure Locking Connections
  • Renovation and New Construction Wiring

Why Pass & Seymour?

Pass & Seymour engineers the PSL515P with an impact- and corrosion-resistant nylon 6/6 shell, brass alloy blades and contacts, and a sealed cord grommet to keep connections reliable in demanding electrical environments. The double dovetail design, non-slip gripping surfaces, and ready-to-wire assembly screws combine durability with straightforward field installation for professional electrical work.

Manufacturer Resources

Spec Sheet

Product Specs

Product Material:
Nylon 6/6
Product Type:
Locking Plug
Amperage Rating:
15A
Configuration:
NEMA L515
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Plugs & Connectors
Product Color:
Black
Product Width:
1.516 in
Product Length:
1.752 in

Pass & Seymour PSL515-P – Frequently Asked Questions

1) What plug should I use if the receptacle is a standard 5-15R instead of a twist-lock?
The Pass & Seymour PSL515P is configured NEMA L515, a locking configuration that twists to lock into a mating L5-15 receptacle. For a standard straight-blade 15A 125V outlet, the Eaton Arrow Hart Ultra Grip straight blade plug is rated 15A 125V in industrial specification grade, and the Bryant 8266T is a NEMA 5-15P hospital grade plug. Neither of those twists to lock, so they will not retain in an L5-15 receptacle, and the PSL515P will not insert into a 5-15R.
2) My equipment runs on 250V. Can I wire it with a PSL515P?
No. The PSL515P is a 15A NEMA L515 device, which is a 125V configuration. For a 250V single-phase cord end, the Leviton 5666-C is a 3-wire 2-pole polarized industrial grade straight blade plug rated 250 volt 1-phase, and the Bryant 8666TSP is an N6-15P, also a 250V configuration. The blade patterns differ from L5-15, so the receptacle must match.
3) Is the PSL515P locking plug suitable for an SO cord on a portable job site cord set?
That's exactly what it's built for. The PSL515P has an integral flexible rubber cord grommet that conforms to and seals around SO cord, keeping oils, water and chips out of the wiring chamber, plus a double dovetail design to resist cord pull-out. External cord grips give you a visual check that the cord is properly retained, which matters on cords that get dragged and yanked daily.
4) What is the Pass & Seymour PSL515P body made of, and will it hold up in a wet or corrosive plant area?
The shell is nylon 6/6, impact and corrosion resistant, with a black back and white front. Blades and contacts are industrial strength brass alloy that resists heat rise. The rubber grommet seals the wiring chamber against oils, water and chips, but note this is not described as a watertight device. For a genuinely watertight application, a watertight plug like the Bryant 8666TSP is the type to look at.
5) The cord has to come off the plug at an angle in a tight cabinet. Is there an alternative to the PSL515P?
The PSL515P is a straight-body locking plug with an integral rubber cord grommet and external cord grips. If the cord needs to exit at an angle, the Bryant 8395T is an angle hospital-grade plug in NEMA 5-20P and the Leviton 275-E is a commercial grade 4-wire 3-pole straight blade angle plug. Both are angle bodies rather than twist-lock, so confirm the receptacle configuration before swapping.
6) We spec tamper-resistant plugs in our facility. Is the PSL515P tamper-resistant?
The PSL515P is not a tamper-resistant device; its retention feature is the twist-lock L515 configuration plus a double dovetail design that resists cord pull-out. If tamper resistance is the requirement, the Leviton 8215-CAT is a tamper-resistant hospital-grade NEMA 5-15P and the Leviton 8315-CT is a tamper-resistant hospital-grade NEMA 5-20P, both supplied in packs of 100.
7) How big is the PSL515P plug body for fitting into a tight enclosure or strain relief boot?
Published dimensions are 1.752 in length and 1.516 in width. That's the plug body only, so allow for the cord and the grip behind it when you're routing into a panel knockout or a cord reel housing.
8) Does the PSL515P come ready to wire, or do I need to back out the screws first?
Ready to wire out of the box. The quick-thread assembly screws and cord-grip screws ship backed out, so you strip, terminate and close it up without pre-loosening anything. The raised ribs and scallop shell profile also give you something to grip when turning to lock or unlock in the field.
9) How do I confirm in the field that a plug on an existing cord is the same as the PSL515P?
The NEMA configuration and device rating are stamped visibly on the body, so you can read L515 and 15A off the plug without pulling a spec sheet. The black back with white front shell is also a quick visual tell when you're standardizing a fleet of cord sets across a building.
10) What is the exact part number and country of origin for ordering the Pass & Seymour L515 locking plug?
Order it as Pass & Seymour PSL515P, manufacturer part number PSL515-P. It's made in Mexico.
How fast can I get the Pass & Seymour PSL515-P delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PSL515-P come with a warranty?
Absolutely. The Pass & Seymour PSL515-P is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PSL515-P?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PSL515-P from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!