Pass & Seymour PT20AC1RED Plug...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$69.10
$21.49
Pass & Seymour PT20AC1RED PlugTail Single-Pole 20A Toggle Switch, Red, cULus Listed

Pass & Seymour PT20AC1RED PlugTail Single-Pole 20A Toggle Switch, Red, cULus Listed

(No reviews yet) Write a Review

Model: PT20AC1-RED

In Stock (leaves warehouse same day if ordered before 3pm ET)

$69.10
$21.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour PT20AC1RED PlugTail Single-Pole 20A Toggle Switch, Red, cULus Listed

The Pass & Seymour PT20AC1RED is a PlugTail single-pole 20A toggle switch in red, built with a glass-reinforced, chemical-resistant thermoplastic back body for durable, code-compliant switching in commercial and residential circuits. Its built-in PlugTail connector uses large brass terminal blades for consistent, reliable electrical connections, and the device carries a cULus Listing for verified safety performance. The finger-safe, no-exposed-terminal design and shallow profile make this switch a fast, secure choice for new construction or renovation wiring.

Key Features

  • Durable Construction: Glass-reinforced, chemical-resistant thermoplastic back body for durability, strength, and resistance to harsh cleaners.
  • PlugTail Connector: Built-in connector features large brass terminal blades to ensure consistent, reliable electrical connections.
  • 20A Single-Pole Switching: Rated for 20A single-pole toggle operation in standard branch circuits.
  • Auto-Ground Clip: Assures positive ground for safer, more dependable installations.
  • Finger-Safe Design: No exposed terminals create a finger-safe application before, during, and after installation.
  • Heavy-Duty Bumpers: Deliver quiet, smooth toggle operation.
  • One-Piece Toggle: Molded from chemical-, impact-, and heat-resistant thermoplastic for long-term reliability.
  • Nickel-Plated Mounting Strap: One-piece design for superior corrosion resistance.
  • Impact- and Chemical-Resistant Cover: Shallow design for easier installation in shallow boxes.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Color: Red
  • Product Finish: Matte
  • Product Height: 2.375 in
  • Product Line: Pass & Seymour
  • Product Width: 1.32 in
  • Product Depth: 1.073 in

Typical Applications

  • Commercial and Residential Electrical Installations
  • Single-Pole Lighting and Receptacle Circuit Control
  • New Construction Wiring Projects
  • Renovation and Retrofit Switch Replacement
  • Shallow Wall Box Installations

Why Pass & Seymour?

Pass & Seymour engineers the PlugTail PT20AC1RED with a glass-reinforced thermoplastic body, brass terminal blades, a nickel-plated mounting strap, and an auto-ground clip to deliver dependable, code-compliant performance. Backed by cULus Listing, this finger-safe, impact- and chemical-resistant toggle switch is built for reliable everyday use on demanding commercial and residential jobs.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Single-Pole Toggle Switch
Amperage Rating:
20A
Listing:
cULus
Product Color:
Red
Product Finish:
Matte
Configuration:
1-Pole
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Toggle Switches
Product Depth:
1.073 in
Product Width:
1.32 in
Product Material:
Thermoplastic
Product Height:
2.375 in

Pass & Seymour PT20AC1-RED – Frequently Asked Questions

1) Can I wire the Pass & Seymour PT20AC1RED switch with normal screw terminals, or do I need the PlugTail connector?
The PT20AC1RED is a PlugTail device, so it has no exposed screw terminals at all. Wiring is done through the built-in PlugTail connector with its large brass terminal blades, which means you need the matching PlugTail switch connector pigtail to land your line, load and ground. If your crew is wiring straight to a device with screws, this is the wrong switch for the job and a conventional 20A single-pole toggle is what you want.
2) Can I use this switch to replace an existing standard 20A toggle switch during a retrofit?
Only if you also install the PlugTail pigtail connector, since the device itself accepts no direct conductor terminations. The existing box wiring gets landed on the PlugTail connector and the switch plugs into it. If you want a straight screw-terminal swap for an old 20A single-pole device, a spec grade switch like the Leviton 1221 or 1221-2KL (20A, 120/277V, 1-pole) is the simpler replacement.
3) I need a 20A toggle switch controlled from two locations - the PT20AC1RED won't work, so what should I use?
The PT20AC1RED is a single-pole device, which controls a load from one location only. For two switch locations on the same load, use a three-way switch such as the Eaton Arrow Hart industrial grade three-way toggle switch rated 20A at 120/277V, or the Bryant 4903W three-way AC toggle switch rated 20A 277V in commercial grade.
4) What is the closest conventional-wired equivalent to the Pass & Seymour PT20AC1RED 20A single-pole switch?
If the PlugTail connector system is not being used on the job, the Leviton 1221 is the nearest match in function: an SPST single-pole toggle switch rated 20A at 120/277V in extra heavy-duty industrial specification grade. The PT20AC1RED is also a 20A 1-pole toggle, but its back body carries a built-in PlugTail connector with brass terminal blades instead of screw terminals, so it plugs onto a pre-wired PlugTail whip rather than being wired directly at the device. The Leviton 1221-2KL is a second extra heavy-duty spec grade 1-pole 20A 120/277V option in the same role.
5) Will this switch fit in a shallow wall box?
That is one of the reasons to pick it. The PlugTail single-pole switch uses a shallow impact- and chemical-resistant cover and a low-profile back body, and it measures 2.375 in high by 1.32 in wide by 1.073 in deep. Because the conductors terminate in the pigtail outside the device, you are not stuffing wire bends behind the switch either.
6) Does the PlugTail 20A toggle switch ground itself to a metal box, or do I need a separate ground jumper?
It has an auto-ground clip that establishes a positive ground through the nickel-plated one-piece mounting strap when mounted to a properly grounded metal box. The ground conductor is also carried through the PlugTail connector, so grounding is handled either way.
7) Does the PlugTail design actually save install time on a large job?
That is its purpose. The rough-in electrician lands the branch wiring on the PlugTail connector early, and trim-out is a single plug-in with no stripping, bending or screw torquing at the device. It also stays finger-safe before, during and after installation because no terminals are ever exposed, which matters on jobs where boxes sit energized or open for a while.
8) I want a 20A single-pole switch that shows whether the load is on - does the PT20AC1RED do that?
The PT20AC1RED is a plain one-piece toggle with no indicator. For a visual on/off indication at the wall, the Leviton 1221-2L is an industrial grade pilot light toggle switch, 1-pole, 120/277V AC, 20A. The Leviton 1201PLC is another industrial grade pilot light toggle switch, 1-pole, at 120V. Both are screw-terminal devices rather than PlugTail.
9) Is the Bryant 4801W a substitute for the Pass & Seymour PT20AC1RED?
They are both single-pole AC toggle switches, but the ratings differ. The Bryant 4801W is a 4-Series single-pole switch rated 15A at 277V, while the PT20AC1RED is rated 20A. On a 20A branch circuit where the switch must carry the full circuit rating, the 15A device is not an interchange. The Bryant is also a conventionally terminated white device, where the PT20AC1RED is red and uses the PlugTail connector back body.
10) Can the Ideal Industries 774005 toggle switch replace a PT20AC1RED in a wall box?
No - they are different classes of device. The Ideal 774005 is a heavy-duty DPST on-off toggle switch with spade terminals, intended for equipment and panel-type switching, not for strap-mounted installation in a standard wall box behind a wallplate. The PT20AC1RED is a 1-pole wall switch with a nickel-plated one-piece mounting strap and a shallow cover for standard and shallow wall boxes.
11) We standardize on red switches for emergency and generator-backed lighting - do the comparable 20A switches come that way?
The PT20AC1RED is supplied in red with a matte finish, which is the usual way to flag emergency or generator-fed circuits. Among the comparable 20A single-pole devices, the Leviton 1221 and 1221-2KL are extra heavy-duty specification grade switches identified by catalog number rather than by a red body, and the Bryant 4801W is a white device. If color-coding the circuit at the device is part of your standard, the red PlugTail switch is what carries it.
12) Why would I spec a red toggle switch instead of white or ivory?
Red is a color-code call. On commercial and institutional jobs red devices are commonly used to mark circuits fed from emergency or generator-backed power, or to flag a switch that must not be operated casually. The PT20AC1RED is red with a matte finish, so it reads clearly against standard white or ivory devices on the same wall.
13) Will the switch body hold up to harsh cleaning chemicals in a kitchen or healthcare corridor?
The back body is glass-reinforced, chemical-resistant thermoplastic, the toggle is molded from chemical-, impact- and heat-resistant thermoplastic, and the cover is impact- and chemical-resistant as well. The mounting strap is nickel plated for corrosion resistance. That combination is aimed at areas that get wiped down with aggressive cleaners.
14) What part number and UPC do I order for the red PlugTail single-pole switch?
Order Pass & Seymour PT20AC1-RED. It is the red, matte, 1-pole 20A PlugTail toggle switch, made in Mexico, and carries UPC 785007108620.
15) Spec calls for a 277V-rated 20A single-pole switch - does the PT20AC1RED cover it or should I look at another brand?
The PT20AC1RED is listed as a 20A single-pole cULus listed toggle switch; confirm the voltage rating against the Pass & Seymour spec sheet before submitting it on a 277V lighting branch. Comparable devices that state 277V on the single-pole side include the Leviton 1221, an SPST extra heavy-duty industrial specification grade switch at 20A 120/277V, and the Leviton 1221-2KL at 20A 120/277V.
How fast can I get the Pass & Seymour PT20AC1-RED delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour PT20AC1-RED come with a warranty?
Absolutely. The Pass & Seymour PT20AC1-RED is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour PT20AC1-RED?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour PT20AC1-RED from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!