Pass & Seymour Range and Dryer...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$12.36
Pass & Seymour Range and Dryer Box, Impact-Resistant Thermoplastic

Pass & Seymour Range and Dryer Box, Impact-Resistant Thermoplastic

(No reviews yet) Write a Review

Model: P2-42-SRD

In Stock (leaves warehouse same day if ordered before 3pm ET)

$12.36
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour Range and Dryer Box, Impact-Resistant Thermoplastic

The Pass & Seymour Range and Dryer Box is purpose-built for range and dryer circuit installations, featuring a 1/2-inch offset for wood or steel stud mounting and a durable impact-resistant thermoplastic construction. UL Listed for code-compliant electrical work, this gray box includes captive mounting screws on each end and a metal cable clamp, and is packaged as a 12 pack for contractors and electricians.

Key Features

  • 1/2-Inch Offset: Designed for wood or steel stud mounting to maintain proper wall alignment.
  • Durable Construction: Constructed of impact-resistant thermoplastic for long-lasting performance.
  • Integrated Cable Clamps: Auto/clamps on each end with a metal cable clamp eliminate the need for separate cable clamps.
  • Easy Installation: Captive mounting screws on each end and a rectangular cutout simplify a fast, accurate install.
  • Location Ribs: Location ribs enable the installer to quickly and accurately maintain the 1/2 inch offset.
  • Multi-Pack Value: Sold as a 12 pack for efficient job-site stocking.

Certifications & Compliance

  • UL Listed

Technical Specifications

  • Material: Thermoplastic
  • Color: Gray
  • Product Line: Pass & Seymour
  • Country of Origin: United States
  • Packaging: 12 EA
  • Offset: 1/2-inch

Typical Applications

  • Range and Dryer Circuit Installations
  • Residential and Light Commercial Wiring
  • Wood or Steel Stud Wall Mounting
  • New Construction and Remodel Electrical Work

Why Pass & Seymour?

Pass & Seymour builds this range and dryer box from impact-resistant thermoplastic with captive mounting screws and integrated cable clamps, reducing installation steps while maintaining a reliable, code-compliant connection. The UL Listing and precise 1/2-inch offset design give electrical professionals a dependable box for demanding range and dryer circuit applications.

Manufacturer Resources

Spec Sheet

Product Specs

list_batch:
PASS-20260820
Product Type:
Outlet Box
Listing:
UL Listed
Country Of Origin:
United States
Product Material:
Thermoplastic
Product Color:
Gray
Department:
Electrical
Product Group:
Boxes & Enclosures
Product Subgroup:
Electrical Boxes

Pass & Seymour P2-42-SRD – Frequently Asked Questions

1) Can the Pass & Seymour P2-42-SRD range and dryer box be mounted on steel studs, or is it wood stud only?
Both. The P2-42-SRD is built with a 1/2 inch offset specifically for wood or steel stud mounting, and location ribs on the body let you hold that 1/2 inch offset accurately as you fasten it. Captive mounting screws on each end mean you are not chasing loose hardware on the ladder.
2) Do I need to buy separate cable clamps for this range and dryer box?
No. The P2-42-SRD has auto/clamps on each end plus a metal cable clamp built in, so separate clamps are not required for the cable entries.
3) Will a standard 1-gang or 4-inch square box work for a range or dryer receptacle instead?
Not for this purpose. The P2-42-SRD is purpose-built for range and dryer circuits, with a rectangular cutout sized for that receptacle and a metal cable clamp for the heavy feeder. General-purpose boxes we carry, like the Allied Moulded P-241QT FlexBox 1-gang switch/receptacle box or the Cantex EZ20SB EZ Box 1-gang steel stud box, are for standard devices, and the RACO 232MS is a 4 in. square welded box 2-1/8 in. deep for conduit work. None of those are range/dryer boxes.
4) Is the Pass & Seymour P2-42-SRD UL Listed for code work?
Yes, the range and dryer box is UL Listed, which is what an inspector will look for on a 240V range or dryer outlet rough-in.
5) How many boxes come in a pack of the P2-42-SRD?
It ships as a 12 pack (12 EA), which suits a multi-family or tract rough-in where you are setting range and dryer boxes unit after unit rather than buying singles.
6) Is this range and dryer box metal or plastic, and will it hold up on a framing job?
It is impact-resistant thermoplastic, gray, non-metallic. The cable clamp itself is metal. Thermoplastic means no bonding of the box is required the way it is with a steel box, and it takes knocks during framing and drywall without cracking.
7) What should I use instead of the Pass & Seymour P2-42-SRD when the box has to mount to steel studs for a general device?
The P2-42-SRD mounts to wood or steel studs using its 1/2-inch offset and location ribs, but it is specific to range and dryer circuits. For an ordinary device opening in a steel stud wall, the Cantex EZ20SB EZ Box is a 1-gang non-metallic steel stud box intended for that purpose.
8) If the installation calls for a metal box rather than thermoplastic, what is the alternative to the Pass & Seymour P2-42-SRD?
The P2-42-SRD is molded from impact-resistant thermoplastic in gray. Where a metal enclosure is specified, the RACO 232MS is a 4 inch square welded box, 2-1/8 inch deep, rated 600V. Note that it is a square box rather than a dedicated range and dryer box, so the device and cover arrangement differs.
9) Is the Thomas & Betts Red-Dot 2IH3-2 an equivalent to the Pass & Seymour P2-42-SRD?
No. The Red-Dot 2IH3-2 is a 2-gang RT box with three 3/4 inch hubs, designed for conduit entries. The Pass & Seymour P2-42-SRD is a thermoplastic range and dryer box with a metal cable clamp and captive mounting screws on each end for cable wiring in a stud wall, so the two are not interchangeable.
10) Is the P2-42-SRD suitable for new construction only, or can I use it on a remodel?
Both. It is intended for new construction and remodel work in residential and light commercial wiring, provided you can get to the stud face to fasten it, since it mounts to a wood or steel stud with the captive end screws rather than clamping to finished drywall.
11) We buy boxes by the case - how does the Pass & Seymour P2-42-SRD pack compare to other boxes?
The Pass & Seymour P2-42-SRD is packaged 12 each per pack, sized for a van or small job-site stock of range and dryer boxes. By contrast, the Thomas & Betts Red-Dot 2IH3-2 is supplied in packs of 100, which suits high-volume repetitive device work rather than the one or two range and dryer boxes a typical dwelling needs.
How fast can I get the Pass & Seymour P2-42-SRD delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour P2-42-SRD come with a warranty?
Absolutely. The Pass & Seymour P2-42-SRD is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour P2-42-SRD?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour P2-42-SRD from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!