Pass & Seymour SS720 1-Gang St...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$62.69
$9.49
Pass & Seymour SS720 1-Gang Stainless Steel Smooth Wallplate

Pass & Seymour SS720 1-Gang Stainless Steel Smooth Wallplate

(No reviews yet) Write a Review

Model: SS720

In Stock (leaves warehouse same day if ordered before 3pm ET)

$62.69
$9.49
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour SS720 1-Gang Stainless Steel Smooth Wallplate

The Pass & Seymour SS720 is a 1-Gang smooth stainless steel wallplate built from Type 302/304 non-magnetic stainless steel with a .032'' nominal thickness. This alloy contains 18% chromium and 8% nickel for superior resistance to corrosion, making the SS720 well suited for food processing plants, dairies, chemical plants, and other industrial, institutional, and commercial applications where corrosive atmospheres exist. The plate is cULus Listed and finished in a durable metallic stainless steel look for long-term performance in demanding environments.

Key Features

  • Configuration: 1-Gang smooth power outlet wallplate for a clean, single-device installation.
  • Durable Construction: Type 302/304 non-magnetic stainless steel, .032'' nominal thickness, with 18% chromium and 8% nickel content for superior corrosion resistance.
  • High-Impact Face: High-impact resistant nylon face adds toughness against everyday wear.
  • Plate Options: Standard, Jumbo, and Tandem plates available, plus special panel plates up to 5-gangs high and 10-gangs wide.
  • Custom Finishing: Can be silk-screened or engraved, and custom punched with over 300 opening styles.
  • Paintable Surface: Paintable to match plastic plates for design flexibility.
  • Finish: Metallic stainless steel finish, packaged in protective film with finish-matching screws included.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: United States
  • Product Finish: Metallic
  • Product Height: 4.5 in
  • Product Line: Pass & Seymour
  • Product Width: 2.75 in
  • Product Depth: 0.2 in

Typical Applications

  • Food Processing Plants
  • Dairies
  • Chemical Plants
  • Industrial and Institutional Facilities
  • Commercial Applications with Corrosive Atmospheres

Why Pass & Seymour?

Pass & Seymour builds the SS720 from corrosion-resistant Type 302/304 stainless steel with a high-impact nylon face, giving installers a wallplate that stands up to harsh industrial and commercial atmospheres. Backed by cULus Listing, it delivers reliable, code-compliant performance for demanding professional electrical installations.

Manufacturer Resources

Spec Sheet

Product Specs

Product Material:
Stainless Steel
Product Type:
Single Receptacle Wallplate
Configuration:
1-Gang
Product Finish:
Metallic
Listing:
cULus
Country Of Origin:
United States
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Wallplates
Product Width:
2.75 in
Product Depth:
0.2 in
Product Color:
Stainless Steel
Product Height:
4.5 in

Pass & Seymour SS720 – Frequently Asked Questions

1) Will the Pass & Seymour SS720 wallplate hold up in a food processing or chemical plant washdown area?
That is the environment it was built for. The SS720 is Type 302/304 non-magnetic stainless steel with 18% chromium and 8% nickel, which is what gives it its corrosion resistance, and Pass & Seymour calls out food processing plants, dairies, and chemical plants as typical applications. Stock plastic or painted steel plates tend to chalk or rust in those atmospheres; stainless does not.
2) What size opening does the Pass & Seymour SS720 cover, and is it a standard or oversized plate?
The SS720 is a 1-gang smooth plate measuring 4.5 in high, 2.75 in wide, and 0.2 in deep, which is the standard 1-gang footprint rather than a jumbo. Pass & Seymour also offers Jumbo and Tandem plates in the same stainless line if you need extra coverage over a rough cutout or a damaged wall surface.
3) What is the closest 1-gang alternative to the Pass & Seymour SS720 stainless steel wallplate?
The Pass & Seymour SS720 is a 1-gang smooth wallplate made from stainless steel. If you need another single-gang plate, the Mulberry 86401 in the 8640 Series is a 1-gang wallplate in steel with a white finish, and the Bryant P8 Series is a 1-gang duplex wallplate. The difference is material and appearance: the SS720 is stainless steel with a metallic finish, while the Mulberry 86401 is a painted white steel plate.
4) Will the Pass & Seymour SS720 cover a toggle switch or a data jack?
No. The SS720 is a smooth 1-gang power outlet wallplate, so its opening suits a receptacle rather than a switch or a jack. For a toggle switch opening, the Mulberry 41020 in the 4102 Series is a 1-gang toggle switch plate. For a voice or data drop, the Eaton 35324W is a wallplate with a 4-conductor Type 625B4 modular jack built in.
5) For a food processing or chemical plant, is a painted steel wallplate an acceptable substitute for the SS720?
The SS720 is built from Type 302/304 non-magnetic stainless steel with 18% chromium and 8% nickel specifically for corrosive atmospheres such as food processing plants, dairies, and chemical plants, and it is cULus Listed. The painted steel options - the Mulberry 86401 8640 Series 1-gang steel plate and the Mulberry 76432 and 76532 cold rolled steel 2-gang plates - are steel-bodied plates with a white finish, so where corrosion resistance is the driver the stainless SS720 is the plate specified for that duty.
6) Does the SS720 stainless wallplate come with mounting screws?
Screws are included and finished to match the plate, so you are not hunting for a matching fastener on site. The plate ships in a protective film to keep the stainless face from scuffing before install, worth leaving on until the wall is done.
7) Is the Pass & Seymour SS720 wallplate UL listed for a commercial inspection?
The SS720 carries a cULus Listing, which covers both US and Canadian requirements. It is also made in the United States, which matters if you are working a job with domestic sourcing requirements.
8) Can I label or engrave a stainless wallplate for circuit identification?
Yes. The Pass & Seymour stainless plate line can be silk-screened or engraved, and custom punched with over 300 opening styles, so panel or equipment plates can be marked for circuit or device identification. Special panel plates go up to 5 gangs high and 10 gangs wide if you need one plate to cover a bank of devices.
9) If the standard SS720 plate is too small to cover the wall opening, what is a larger option?
The Pass & Seymour SS720 is a standard-size 1-gang stainless steel plate measuring 4.5 in high by 2.75 in wide; Standard, Jumbo, and Tandem sizes are offered in the same stainless line for openings that need more coverage. Among other brands, the Bryant PJ Series is an M-size wallplate for wiring devices, which gives you an oversized footprint in a different material family.
10) Can the SS720 be used where a color-coded or labeled plate is required, like a gas burner switch?
The SS720 is a metallic stainless steel plate, and it can be silk-screened or engraved and is paintable, so identification can be added to it. Where a factory color-coded switch plate is called for, the Mulberry 41020 is a red 1-gang gas burner toggle switch plate in the 4102 Series, supplied already marked for that service.
11) Can a stainless steel wallplate be painted to match the wall?
The SS720 is paintable, so it can be finished to match adjacent plastic plates where an architect wants everything the same color. Out of the box it is a metallic stainless finish.
12) Will a magnet stick to the SS720 wallplate?
No. The SS720 uses non-magnetic Type 302/304 stainless, so magnetic mounts and tool holders will not grab it. That also means it will not pick up ferrous dust in shop environments the way a plated steel plate can.
How fast can I get the Pass & Seymour SS720 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour SS720 come with a warranty?
Absolutely. The Pass & Seymour SS720 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour SS720?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour SS720 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!