Pass & Seymour TP226W Three-Ga...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$54.83
$12.94
Pass & Seymour TP226W Combination Openings, 2 Toggle Switch and 1 Decorator, Three Gang, White

Pass & Seymour TP226W Three-Gang Combination Wallplate, 2-Toggle/1-Decorator, White

(No reviews yet) Write a Review

Model: TP226-W

In Stock (leaves warehouse same day if ordered before 3pm ET)

$54.83
$12.94
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour TP226W Three-Gang Combination Wallplate, 2-Toggle/1-Decorator, White

The Pass & Seymour TP226W is a three-gang combination wallplate with openings for 2 toggle switches and 1 decorator device, finished in White. Molded from rugged, self-extinguishing nylon with a nominal thickness of .070 inch, this 'TP' series plate is built to hold up in demanding environments and carries a cULus Listing for verified safety performance.

Key Features

  • Combination Configuration: Three-gang opening layout combining 2 toggle switch positions and 1 decorator/rocker opening in a single plate.
  • Durable Construction: Molded of rugged, practically indestructible self-extinguishing nylon for long-term reliability.
  • Nominal Thickness: .070 inch profile provides a low-profile, snug fit over device boxes.
  • TP Series Sizing: Offers an extra 3/16 inch of width and height compared to Standard size plates, allowing better coverage of oversized cutouts.
  • High-Abuse Rated: Preferred for hospital, industrial, institutional, and other high-abuse applications where standard plates may crack or discolor.
  • Finish: Clean White finish with a matte surface that blends with most wall colors and device finishes.
  • Color Availability: The TP series is also available in Ivory, Brown, Gray, Black, Blue, Orange, Red, and Light Almond for matching device and wall color schemes.

Certifications & Compliance

  • cULus Listed

Technical Specifications

  • Country Of Origin: Mexico
  • Product Finish: Matte
  • Product Height: 4.6875 in
  • Product Line: Pass & Seymour
  • Product Width: 6.563 in
  • Product Depth: 0.25 in

Typical Applications

  • Hospital and Healthcare Facility Wiring Devices
  • Industrial and Institutional Electrical Installations
  • High-Abuse Commercial Environments
  • Multi-Device Switch and Receptacle Combinations
  • Renovation and New Construction Projects

Why Pass & Seymour?

Pass & Seymour engineers the TP226W from self-extinguishing nylon to withstand the wear and impact common in hospital, industrial, and institutional settings, while the cULus Listing confirms it meets recognized safety standards for wiring devices. The three-gang combination opening design and precise .070 inch profile make it a dependable, code-compliant choice for professional electrical installations that combine toggle switches with a decorator device.

Manufacturer Resources

Spec Sheet

Product Specs

Product Type:
Wallplate
Product Material:
Nylon
Product Color:
White
Configuration:
Three Gang
Product Finish:
Matte
Listing:
cULus
Country of Origin:
Mexico
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Wallplates

Pass & Seymour TP226-W – Frequently Asked Questions

1) What device layout does the Pass & Seymour TP226W three-gang wallplate cover?
The TP226W covers a three-gang box with two toggle switch openings and one decorator (rocker) opening. So it suits a box where two standard toggles sit alongside a decorator switch, dimmer, or decorator-style receptacle. If all three positions in your box are toggles, or all three are decorator, this is the wrong plate - you need a straight three-gang toggle or three-gang decorator plate instead.
2) Will an oversized or slightly crooked drywall cutout still be covered by this plate?
That is what the TP series is for. The TP226W carries an extra 3/16 inch of width and height over a Standard size plate, so it hides ragged or oversized cutouts and off-center box openings that a standard plate leaves showing. Finished dimensions are 6.563 inches by 4.6875 inches with a 0.25 inch depth.
3) Is a nylon wallplate strong enough for a hospital corridor or industrial plant?
Nylon is the material of choice for those settings. The TP226W is molded from rugged, self-extinguishing nylon at a nominal .070 inch thickness, and Pass & Seymour positions the TP series for hospital, industrial, institutional and other high-abuse applications where thinner thermoplastic plates crack or discolor. Nylon also resists yellowing better than standard plastic under long-term light exposure.
4) Does the toggle/decorator order on the TP226W matter, and can I flip the plate?
Orientation matters. The TP226W is molded with the two toggle openings and the single decorator opening in a fixed arrangement, and the plate is symmetrical top to bottom only, not left to right in terms of opening type. If your decorator device is on the opposite end of the box from the plate's decorator cutout, swap the device positions in the box rather than trying to reverse the plate.
5) Should I use a nylon plate like the TP226W or a steel combination wallplate?
Nylon versus steel comes down to the environment. The TP226W is nylon, non-conductive, and will not rust, which is why it shows up in healthcare and institutional interiors. Where you want metal - mechanical rooms, shops, impact-prone industrial walls - ZenSupply carries cold rolled steel combination plates such as the Mulberry 76432 (764 Series) and Mulberry 76532 (765 Series), both two-gang combination plates in white. Those are two-gang, though, so they will not cover a three-gang box.
6) Will the TP226W fit over a decorator GFCI receptacle in the third position?
Yes. The decorator opening is the standard rectangular cutout used by decorator/rocker switches, decorator dimmers and decorator-style GFCI receptacles, so a GFCI in that gang is covered without any additional adapter. The other two gangs accept standard toggle switches only.
7) Are mounting screws included with the TP226W, and do they match the plate color?
Pass & Seymour supplies TP series plates with mounting screws, and the screw heads are color-matched to the plate, so the White TP226W ships with white screws. Existing 6-32 device screws in the box will also work if you prefer to reuse them.
8) Where is the Pass & Seymour TP226W made, and what is the exact part number to order?
Order it as Pass & Seymour TP226W, manufacturer part number TP226-W. Country of origin is Mexico, which is the detail a government or institutional buyer usually needs for procurement paperwork.
9) We use color-coded plates to flag emergency or gas shutoff switches. Does the TP226W cover that?
The TP226W itself is White with a matte finish, and the TP series is also offered in Ivory, Brown, Gray, Black, Blue, Orange, Red, and Light Almond for device and wall color schemes. For a dedicated marked single switch, Mulberry's 41020 in the 4102 series is a one-gang toggle switch plate in gas burner red, which is a single-gang plate rather than a three-gang combination layout.
10) What if one of the openings needs to carry a data or voice jack rather than a switch?
The TP226W's three openings are 2 toggle and 1 decorator, with no communications port built in. Eaton's 35324W is a wallplate with a 4-conductor data/voice modular jack, Type 625B4, and handles the telecom drop directly in the plate. Where the decorator opening can take a modular insert device, the TP226W can still be used with the insert supplied separately.
How fast can I get the Pass & Seymour TP226-W delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour TP226-W come with a warranty?
Absolutely. The Pass & Seymour TP226-W is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour TP226-W?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour TP226-W from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!