Pass & Seymour TSDCL303P Toggl...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$42.54
Pass & Seymour TSDCL303P Toggle Slide Dimmer, CFL/LED, Single Pole/3-Way, 300W

Pass & Seymour TSDCL303P Toggle Slide Dimmer, CFL/LED, Single Pole/3-Way, 300W

(No reviews yet) Write a Review

Model: TSDCL303PBK

In Stock (leaves warehouse same day if ordered before 3pm ET)

$42.54
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Pass & Seymour TSDCL303P Toggle Slide Dimmer, CFL/LED, Single Pole/3-Way, 300W

The Pass & Seymour TSDCL303P Toggle Slide Dimmer by Legrand replaces a standard wall switch with combined ON/OFF toggle and slide dimming control, rated 300W for CFL/LED and 700W for Incandescent loads at 120VAC, 60Hz. Configurable for Single Pole or 3-Way operation, this Spec Grade dimmer features a Black polycarbonate housing and is cULus and CSA Listed for indoor use. Constant memory and screw-pressure-plate backwire terminals make it a dependable retrofit for residential and commercial lighting circuits.

Key Features

  • Dimming Rating: 300W CFL/LED and 700W Incandescent at 120VAC, 60Hz for broad bulb compatibility.
  • Durable Construction: Polycarbonate housing in a Black finish for long-lasting performance.
  • Flexible Switching: Single Pole / 3-Way operation supports multiple circuit configurations.
  • Convenient Operation: Combines an ON/OFF toggle switch with a separate ergonomic slider for dimming control, making it easier to adjust in the dark or on the run.
  • Constant Memory: Automatically returns connected lights to their previous level after a power failure.
  • Screw-Pressure-Plate Backwire Terminals: Save time, space, and money during installation.
  • Compact Footprint: 1.73" wide x 4.19" (2.68") long x 1.40" deep, sized to fit standard wallboxes.
  • Lifetime Warranty backs the Spec Grade construction, and seven additional face cover colors are available separately (see TSDKIT).

Certifications & Compliance

  • CSA Listed
  • cULus Listed
  • UL Standard UL1472

Technical Specifications

  • CSA Listed: Yes
  • Buy American Act Status: No
  • cULus: Yes

Typical Applications

  • Residential and Commercial Lighting Control
  • Retrofit Replacement for Standard Toggle Switches
  • Dimmable CFL, LED, and Incandescent Lighting Circuits
  • Single Pole and 3-Way Switching Applications
  • Indoor Wallbox Installations

Why Pass & Seymour?

Pass & Seymour by Legrand backs the TSDCL303P Toggle Slide Dimmer with a Lifetime Warranty, Spec Grade polycarbonate construction, and cULus and CSA Listed certification for code-compliant performance. The ergonomic toggle-and-slider design paired with constant memory function makes it a reliable choice for professional electrical installations, whether replacing an existing switch or wiring new construction.

Manufacturer Resources

Product Specs

list_batch:
PASS-20260820
Product Type:
Toggle Dimmer
Configuration:
Single Pole/3-Way
Voltage Rating:
120VAC
Listing:
cULus
Grade:
Spec Grade
Product Material:
Polycarbonate
Product Color:
Black
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Dimmer Switches

Pass & Seymour TSDCL303PBK – Frequently Asked Questions

1) Will the Pass & Seymour TSDCL303P dimmer work on a 3-way circuit, or is it single pole only?
It does both. The TSDCL303P is configurable for single pole or 3-way operation, so it can run as the only switch on a circuit or as one of two switches controlling the same lights. Note that in a 3-way pair only one dimmer goes in; the companion location takes a standard 3-way switch.
2) Can I swap a standard toggle wall switch for this dimmer without changing the box?
Yes, that is what it is built for. The device measures 1.73 inches wide by 4.19 inches (2.68 inches) long by 1.40 inches deep and is sized for standard wallboxes, and it keeps an ON/OFF toggle so the wall plate and the user experience stay familiar. The slider sits alongside the toggle for level control.
3) Is this toggle dimmer listed for commercial work?
It is cULus and CSA Listed and built to UL Standard UL1472, and it is a Spec Grade device rated 120VAC for indoor use. That covers code-compliant commercial and residential lighting circuits in standard wallboxes.
4) What is the difference between the Pass & Seymour TSDCL303P and the Eaton TI061-V-K-L toggle dimmer?
Both are toggle-style dimmer switches that replace a standard wall switch. The Pass & Seymour TSDCL303P pairs an ON/OFF toggle with a separate slide control for dimming level, is rated 300W for CFL/LED and 700W for incandescent at 120VAC 60Hz, and is configurable for single pole or 3-way operation. It is a Spec Grade device with a polycarbonate housing, and the TSDCL303PBK is the black version. The Eaton comparable is the TI061-V-K-L toggle dimmer in ivory, so color is the first practical difference if you are matching existing devices on a wall. For LED and CFL circuits, confirm the Eaton's load rating against your fixture total before swapping, since the TSDCL303P's 300W CFL/LED figure is the number to beat on that side.
5) Does this dimmer only come in black, or can I match the ivory and white devices already in the building?
The TSDCL303P ships as a black polycarbonate device. Seven additional face cover colors are sold separately under TSDKIT, so a property manager standardizing on an existing device color can change the visible cover without changing the dimmer.
6) Can I backwire this Pass & Seymour dimmer instead of looping wire under screws?
Yes. It uses screw-pressure-plate backwire terminals, so the conductor goes straight in behind the plate and the screw clamps it, which is faster in a crowded box than forming hooks on side terminals.
7) How does this compare to the Eaton toggle dimmer?
Both are toggle-style dimmers. The Pass & Seymour TSDCL303P is a black, Spec Grade single pole/3-way unit rated 300W CFL/LED and 700W incandescent at 120VAC with a separate slide for level control. The Eaton alternative we carry is the TI061-V-K-L in ivory, so it is the pick if the other devices in the room are ivory and you do not need the slider.
8) I need an ivory toggle dimmer instead of black - what should I order?
The TSDCL303PBK is the black version of the Pass & Seymour toggle slide dimmer, and Pass & Seymour sells seven additional face cover colors separately under TSDKIT if you want to keep the same device and change the visible cover. If you would rather buy the device already in ivory, the Eaton TI061-V-K-L is an ivory toggle dimmer switch. Verify the Eaton's wattage rating and whether it supports 3-way before using it on a multi-location circuit, since the Pass & Seymour unit is configurable single pole or 3-way at 120VAC.
9) Does a plain toggle dimmer do the same thing as the TSDCL303P slide dimmer?
Not quite the same control. The Pass & Seymour TSDCL303P combines an ON/OFF toggle with a separate ergonomic slider, so the light returns to its set level when you flip the toggle and the slider sets that level independently; it also has constant memory, which restores the previous light level after a power failure. A conventional toggle dimmer such as the Eaton TI061-V-K-L controls the device from the toggle itself. If you want occupants to be able to switch the light without disturbing a preset dim level, the toggle-plus-slider arrangement is the one that does that.
10) What happens to the light level after a power outage with this dimmer?
Constant memory brings the connected lights back to the level they were set at before the power dropped, so nobody has to walk the building resetting sliders after an outage.
How fast can I get the Pass & Seymour TSDCL303PBK delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pass & Seymour TSDCL303PBK come with a warranty?
Absolutely. The Pass & Seymour TSDCL303PBK is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pass & Seymour TSDCL303PBK?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Pass & Seymour TSDCL303PBK from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!