You may also like
PDQ 631126 Rim Panic / Fire Strike Shim .100"
Replacement Parts for PDQ 6300 and 6400 Series Exit Devices
PDQ part number 631126: Rim Panic / Fire Strike Shim .100". A genuine PDQ part.
These are factory replacement and conversion parts for PDQ 6300 Series wide stile and 6400 Series narrow stile exit devices, covering rim, surface vertical rod, concealed vertical rod and mortise configurations. The range includes head chassis assemblies, latchbolts, rods and connectors, push bars, covers and end caps, strikes and shims, dogging and alarm conversion kits, screwpacks and signal switches, so an existing device can be serviced or upgraded without replacing the whole unit.
Key Features
- Genuine PDQ parts for 6300 Series wide stile and 6400 Series narrow stile exit devices
- Covers rim, surface vertical rod, concealed vertical rod and mortise device configurations
- Panic rated and fire rated head chassis available for replacement
- Conversion kits add cylinder dogging or an alarm to an installed device
- Strikes, shims, drill guides and screwpacks for installation and adjustment
Technical Specifications
- Manufacturer Part Number: 631126
Manufacturer Resources
Product Specs
- Department:
- Door Hardware
- Product Group:
- Exit Devices and Trim
- Product Subgroup:
- Exit Device Mounting and Dogging
- Product Type:
- Shim
- Product Category:
- Parts and Accessories
- Product Model:
- 631126
- Commercial/Residential:
- Commercial
- Tags:
- pdq 631126, 631126 pdq, 631126
- Subcategory:
- Parts and Accessories
- Parts and Accessories Type:
- Shim or Spacer
- Series:
- 6300 Series
PDQ 631126 – Frequently Asked Questions
1) What is the PDQ 631126 shim used for on a rim exit device?
PDQ 631126 is a .100 inch thick strike shim for rim panic and fire exit strikes. It sits behind the rim strike to build the strike out from the frame or stop so the device's latch engages correctly. If the latch is riding the strike lip or not catching fully, a shim of this thickness is the standard adjustment.
2) Will the PDQ 631126 shim work with a surface vertical rod or mortise exit device?
It is specifically the rim strike shim. The PDQ replacement parts range covers rim, surface vertical rod, concealed vertical rod and mortise configurations, but a surface or concealed vertical rod device latches at the head and threshold and a mortise device latches into the frame edge, so neither uses a rim strike. For those, you need the strike or top latch part for that configuration rather than this shim.
3) Can I use the PDQ 631126 shim on a fire rated opening?
The 631126 is the rim panic / fire strike shim, so it is the correct PDQ part for both panic and fire rated rim strikes in the 6300 and 6400 Series. Use the genuine part on a fire door, since substituting non-listed hardware on a fire rated assembly affects the listing of the whole opening.
4) How many 631126 shims do I need to correct latch engagement?
Each shim adds .100 inch of standoff, so stack them to reach the offset your frame needs. Shim in increments and test the latch after each one until the bolt drops fully behind the strike and the device latches without the push bar being held. Order a quantity that matches the number of doors plus spares for the stack.
5) Do I have to replace the whole exit device if the strike is out of alignment?
No. The 631126 shim is one of the service and conversion parts PDQ makes for the 6300 and 6400 Series, so an installed device can be adjusted or repaired in place. The same parts range covers head chassis assemblies, latchbolts, rods and connectors, push bars, covers and end caps, strikes, dogging and alarm conversion kits, screwpacks and signal switches.
6) What PDQ part number should I give my supplier for the .100 inch rim strike shim?
Order PDQ 631126. That is the manufacturer part number for the .100 inch rim panic / fire strike shim.
How fast can I get the PDQ 631126 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the PDQ 631126 come with a warranty?
Absolutely. The PDQ 631126 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the PDQ 631126?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the PDQ 631126 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.