PDQ V11225 Boring Jig, locates...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$64.91

PDQ V11225 Boring Jig, locates off 2-1/8" bore to drill 5/16" DIA anti-rotation through-bolts

(No reviews yet) Write a Review

Model: V11225

In Stock (leaves warehouse same day if ordered before 3pm ET)

$64.91
Adding to cart… The item has been added
Free Shipping on orders over $199.99
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks

PDQ V11225 Boring Jig, locates off 2-1/8" bore to drill 5/16" DIA anti-rotation through-bolts

Replacement Parts for PDQ XGT and GT Series Cylindrical Locks

PDQ part number V11225: Boring Jig, locates off 2-1/8" bore to drill 5/16" DIA anti-rotation through-bolts. A genuine PDQ part.

These are PDQ factory replacement parts for PDQ XGT and GT Series cylindrical locks, covering levers, roses, push buttons, strikes, latchbolts, cylinder tailpieces and installation items. The XGT and GT parts pages in the PDQ price book share the same part numbers, and the key in lever cylinder tailpiece is also listed for the GP Series.

Key Features

  • Replacement levers in Boston, Miami and Philadelphia styles for non-cylinder, button lock, conventional key in lever and interchangeable core functions
  • Inside and outside roses, push buttons, SFIC disposable core and cylinder tailpieces
  • T strike, ASA (ANSI) strike and full lip strike, each with a matching dust box
  • Standard latchbolt with dead latch and 2-1/4" x 1-1/8" square corner faceplate
  • Installation items including a screw pack with mounting screws, hex key and pick, a spacer set for 1-3/8" doors, a boring jig for the anti-rotation through-bolts, and lever return springs

Technical Specifications

  • Applies to: XGT and GT cylindrical locks (XGT parts pages 41-42 repeat the GT part numbers on 52-53)
  • Manufacturer Part Number: V11225

Product Specs

Department:
Door Hardware
Product Group:
Locksmith Supplies
Product Subgroup:
Locksmith Tools
Product Type:
Boring Jig
Product Category:
Parts and Accessories
Product Model:
V11225
Commercial/Residential:
Commercial
Tags:
pdq v11225, v11225 pdq, v11225
Subcategory:
Parts and Accessories
Parts and Accessories Type:
Tool
Series:
GT Series

PDQ V11225 – Frequently Asked Questions

1) Do I need the V11225 jig if the door is already prepped for a cylindrical lock?
A standard 161 cylindrical prep gives you the 2-1/8 inch cross bore and the latch bore, but not the pair of 5/16 inch holes PDQ's anti-rotation through-bolts pass through. If the door you are retrofitting has no through-bolt holes, the V11225 is what locates them off the existing 2-1/8 inch bore. If the holes are already there from a previous PDQ XGT or GT lock, you do not need the jig.
2) I am installing a PDQ GT lock on a 1-3/8 inch door. Is the boring jig all I need?
No. For a 1-3/8 inch door PDQ also lists a spacer set, which is a separate part from the V11225 boring jig. The jig only locates the 5/16 inch through-bolt holes; the spacer set is what makes the chassis work at the thinner door thickness. Order both for that opening.
3) Will the PDQ V11225 jig work for both the XGT and GT Series locks?
Yes. PDQ lists the same part numbers for the XGT and GT cylindrical lock parts, and V11225 is one of them, so one jig covers both series.
4) Is this a consumable part or a tool I keep in the truck?
It is a tool, not a part that gets installed in the door. PDQ classes V11225 as an installation item, and a locksmith or hardware installer buys one and reuses it across every XGT or GT lock install rather than ordering one per opening.
5) Is V11225 a genuine PDQ part or an aftermarket jig?
V11225 is the genuine PDQ factory part number for the boring jig, sold under the PDQ GT Series replacement parts program. Order it by that number to match the XGT and GT lock prep.
6) Is the PDQ V11225 jig suitable for commercial door hardware work?
It is a commercial door hardware item, intended for PDQ's XGT and GT cylindrical locksets rather than residential knob sets. If you are standardizing a facility on PDQ GT Series locks, this is the factory jig for prepping the through-bolt holes.
How fast can I get the PDQ V11225 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the PDQ V11225 come with a warranty?
Absolutely. The PDQ V11225 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the PDQ V11225?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the PDQ V11225 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.