You may also like
184 Series
The 184 Series Threshold Stop Strip is 5/8" wide and 3/8" high and is used with a standard flat top saddle threshold to provide a door stop and seal at the bottom of the door. It's available with three insert options including ThermoSeal (T), Pile Brush (P), and Eco-V (V).
Features
-
Used with standard flat top saddle threshold to provide door stop and seal at bottom of door
-
Predrilled with #10-24 Phillips flat head machine screws of appropriate length
-
Stops will affect the pivot hole location of an assembly
-
Includes Pile, ThermoSeal, or Eco-V insert
Benefits
-
Used to create custom bumper threshold configurations
Specifications
-
Base Material: Aluminum alloy
-
Fasteners: Machine Screw
-
Maximum Length: 185"
-
Minimum Length: 24"
184T
Threshold Stop Strip with ThermoSeal Insert
Features
- GREENGUARD certified
- Sound tested; helps with acoustic performance
184P
Threshold Stop Strip with Pile Brush Insert
Features
- Provides excellent seal to keep out draft, dust, moisture, fumes, light and sound
- Reduces friction to allow for easy sliding of doors
184V
Threshold Stop Strip with Eco-V Insert
Features
- GREENGUARD Gold certified, eco-friendly material
- Economical bio-based material, contains no phthalates or heavy metals
- Assists building and design teams with emissions criteria in green building rating programs
- Highly versatile, easily deployable for a variety of building applications
- Surpasses the quality and durability of traditional vinyl, resulting in a longer service life and less need for replacement
- Meets the Pemko gasketing standards for compression and tensile strength, which provides exceptional energy-saving performance
- Prevents air leakage
- Heavy metal free
- Plasticizers from renewable carbon sources, stabilizers are organic-based and zinc free
- Limited ultraviolet and weather resistance, good chemical resistance to adhesives and most mild cleaning solutions
Manufacturer Resources
Product Specs
- Subcategory:
- Thresholds
- Product Group:
- Door Trim and Accessories
- Product Subgroup:
- Door Thresholds
- Product Type:
- Commercial Thresholds
- Commercial/Residential:
- Commercial
- Product Model:
- 184
- Product Dimension:
- W: 5/8", H: 3/8"
- Product Substrate:
- Aluminum
- Product Category:
- Door Trim and Accessories
Pemko 184AT 36 – Frequently Asked Questions
1) What is the Pemko 184 series threshold stop strip used for?
The Pemko 184 series provides a raised barrier at the threshold to stop water, air, and debris infiltration. It mounts flush to the floor surface and works with door bottoms and weatherstripping systems.
2) What are the exact dimensions of this threshold strip?
The strip measures 5/8 inch wide and 3/8 inch high. Standard lengths are available. Check the specific product listing for available length options.
3) Which door types work with the 184 series threshold?
This threshold works with most commercial and residential doors when paired with appropriate door bottoms. Verify door bottom clearance accommodates the 3/8 inch height.
4) What finishes are available for the Pemko 184 series?
Pemko typically offers mill finish aluminum and anodized finishes. Check the product specifications for exact finish options on your selected length.
5) What is the load capacity of this threshold strip?
The aluminum construction handles normal foot traffic loads. For heavy-duty applications or high-traffic areas, verify load requirements with manufacturer specifications.
6) Does this threshold meet ADA accessibility requirements?
At 3/8 inch height, this may exceed ADA thresholds limits for some applications. Check local accessibility codes and consider beveled transitions where required.
7) What accessories work with the 184 series threshold?
Compatible door bottoms and weatherstripping complete the seal system. End caps and junction pieces may be available for multi-section installations.
8) How do you install the Pemko 184 threshold strip?
Surface mount with screws through pre-drilled holes. Mark centerline, drill pilot holes, and secure with appropriate fasteners for your floor material. Use sealant under the strip.
9) How do you maintain this threshold strip?
Clean regularly with mild detergent and water. Check fasteners periodically for looseness. Inspect sealant and replace if cracked or separated.
10) What other Pemko threshold options are available?
Browse other Pemko threshold profiles including beveled, ADA-compliant, and heavy-duty options for different applications and height requirements.
11) Can this threshold handle outdoor weather exposure?
Aluminum construction resists corrosion for exterior use. Anodized finishes provide additional weather protection. Ensure proper drainage to prevent water pooling.
12) How do you cut the threshold to custom lengths?
Cut aluminum threshold with a fine-tooth hacksaw or miter saw with metal cutting blade. File cut ends smooth and apply touch-up finish if needed.
How fast can I get the Pemko 184AT 36 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Pemko 184AT 36 come with a warranty?
Absolutely. The Pemko 184AT 36 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Pemko 184AT 36?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Pemko 184AT 36 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.