SPFM-SLF Series
The SPFM-SLF Special Full Mortise Short Leaf Flush Continuous Geared Hinge is designed for door and frame applications where the hinge leaf may interfere with the weatherstrip, thermo-break or applied stop of the frame. This hinge is applied to the frame rabbet and door edge, and is available in standard and heavy duty models.
Features
-
Standard and heavy duty versions available
-
For applications where hinge leaf may interfere with the weatherstrip, thermo-break, or applied stop
-
Applied to conceal both leaves
-
Wood screws available on request
-
Custom lengths available
-
Special FirePins are only required on 3-Hour (A-Label) assemblies
-
Certain door and frame conditions may require an extra 1/32"-1/16" clearance
-
Excessive clearance on fire rated assemblies may violate the requirements for NFPA 80
Benefits
-
Special hinge reinforcements are not required
-
Hollow metal door and frame manufacturers’ standard is acceptable
-
Removal of hinge reinforcements in the door and frame is not advised
-
Guaranteed for the life of the opening against defects in material or workmanship (HD only)
Specifications
-
Grade: Grade 1
-
Hinge Material: Aluminum
-
Hinge Mounting Type: Full Mortise
-
Hinge Strength: Heavy Weight
-
Handing: Non-handed
-
Fastener: Teks
-
Fastener Type: Self Drilling
-
Maximum Door Thickness: 2 1/4"
-
Minimum Door Thickness: 1 3/4"
-
Maximum Door Width: 4'
-
Maximum Hinge Length: 10'
-
Minimum Length: 79"
-
Maximum Swing: 180°
-
Minimum Hinge Clearance: 5/16"
-
Weight: 1.13lbs. per foot
Certifications
-
Health Product Declaration (HPD)
-
UL 10C - Standard for Positive Pressure Fire Tests of Door Assemblies
-
ANSI/BHMA Standard A156.26
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Category:
- Door Hinges and Pivots
- Subcategory:
- Continuous Hinges
- Grade:
- Grade 1
- Product Group:
- Door Hinges and Pivots
- Product Subgroup:
- Continuous Hinges
- Product Type:
- Continuous Aluminum Geard Hinges
- Model:
- SPFM-SLF
- Commercial/Residential:
- Commercial