Klein Tools A116-2 Pocket Clip...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$58.10
$8.10
Klein Tools A116-2 Pocket Clip Screwdriver, 3/32-Inch Tip, 2-Inch

Klein Tools A116-2 Pocket Clip Screwdriver, 3/32-Inch Tip, 2-Inch

(No reviews yet) Write a Review

Model: A116-2
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$58.10
$8.10
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Pocket Clip Screwdriver, 3/32-Inch Tip, 2-Inch

  • Features

    • Nickel-chrome, precision-forged and polished blades with black tips
    • Convenient pocket clip
    • Made in USA
    • Tough amber, smooth Comfordome handle fits in the palm of the hand comfortably
    • Chrome-plated shaft helps prevent corrosion
    • Internal flanges provide solid, twist-resistant shaft anchor
    • Meets or exceeds applicable ASME / ANSI specifications

  • Warnings

    • Always wear approved eye protection.
    • NOT insulated. Will NOT protect against electrical shock.
    • Do NOT use to pry or chisel.


A116-2 - spec sheet

Manufacturer Resources

Product Specs

Handle Color:
Yellow
Handle Material:
Plastic
Insulated:
No
Item Depth:
4.4380 in
Item Height:
1.0000 in
Item Weight:
0.0500 lbs
Item Width:
1.0000 in
Magnetic:
No
Overall Length:
4.438" (11.3 cm)
Shank Length:
2" (5.1 cm)
Shank Type:
Round
Tip Size:
3/32" (2.4 mm)
Tip Type:
Keystone
Department:
Electrical
Product Group:
Hand Tools
Product Subgroup:
Screwdrivers & Drivers
Product Material:
Steel
Product Weight:
0.8 oz (23 g)
Product Type:
Hardware

Klein Tools A116-2 – Frequently Asked Questions

1) Is the Klein A116-2 pocket clip screwdriver safe to use on live electrical circuits?
No. The A116-2 is not insulated and will not protect against electrical shock, so it should never be used on energized conductors. If you need to work live, you need a Klein insulated screwdriver rated to 1000V, not this one. The A116-2 is a general service and terminal-adjustment driver only.
2) What size screws does the 3/32-inch keystone tip on the Klein A116-2 fit?
The tip is a 3/32 inch (2.4 mm) keystone slotted blade, which is the small end of the range used on terminal screws in thermostats, switch plates, control boards, and instrument terminals. Keystone means the blade flares slightly above the tip rather than tapering to a cabinet point, so it seats in a slot without wedging.
3) How long is the Klein A116-2 pocket screwdriver overall, and will it clip in a shirt pocket?
Overall length is 4.438 inches (11.3 cm) with a 2 inch (5.1 cm) round shank, and it has a pocket clip on the handle. At 0.8 oz (23 g) it sits in a shirt pocket like a pen without dragging the fabric down.
4) Can I use the Klein A116-2 to pry open a cover or scrape a terminal clean?
No. Klein specifically warns against using it to pry or chisel. The shank is a 2 inch round chrome-plated shaft sized for driving small slotted screws, and side-loading it will bend or snap the blade. Keep a pry bar or scraper on the cart for that work, and wear approved eye protection when driving.
5) Should I buy the A116-2 or a full-size slotted screwdriver for panel work?
Pick by reach. The A116-2 is a 4.438 inch pocket driver with a 2 inch shank, so it handles thermostat, device, and control-terminal screws you meet at the face of the opening. It won't reach down into a deep enclosure or past a bundle of conductors, and it gives you little leverage on a tight screw. Keep a standard-length cabinet or keystone driver for those, and carry the A116-2 as the one clipped to your shirt.
6) Will the A116-2 pick up a dropped screw in a box or panel?
No, the blade is not magnetized, so it won't retrieve a dropped screw or hold one on the tip while you start it. For overhead or deep-box work where you need the screw to stay put, use a magnetic-tip driver or a magnetizer.
7) Does the Klein A116-2 meet any tool specification standard for institutional purchasing?
Klein states the A116-2 meets or exceeds applicable ASME/ANSI specifications, and it is made in the USA. That is often what a government, healthcare, or education MRO buyer needs on file for a hand tool line item.
8) What is the handle on the Klein A116-2 made of and will it hold up in a tool pouch?
It's a yellow plastic Comfordome handle in Klein's tough amber material, shaped to sit in the palm. The steel blade is anchored by internal flanges to resist twisting out of the handle, and the chrome-plated shaft resists corrosion in a damp pouch or truck box.
How fast can I get the Klein Tools A116-2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools A116-2 come with a warranty?
Absolutely. The Klein Tools A116-2 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools A116-2?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools A116-2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!