Thomas & Betts LR17CG-TB Pre-A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$155.53
$124.26
Thomas & Betts LR17CG-TB Pre-Assembled Form 7 Conduit Body, Cover & Gasket

Thomas & Betts LR17CG-TB Pre-Assembled Form 7 Conduit Body, Cover & Gasket

(No reviews yet) Write a Review

Model: LR17CG-TB
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$155.53
$124.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Pre-Assembled Form 7 Conduit Body, Cover & Gasket

  • Features

    • T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers.
    • Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks.
    • Bodies are designed with a flat back, allowing more cubic inch capacity.
    • Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
    • Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain.


LR17CG-TB - spec sheet

Manufacturer Resources

Product Specs

Form:
7
Hub Size:
1/2 Inch
Outer Dimensions Inches :
6.5x4.75x4.75
Outer Quantity:
5
Product Group:
Electrical Boxes
Standard:
UL E2969, CSA
Unspsc:
39131708 Electrical conduit fitting body
Weight Uom:
1.2 lbs. Each
Department:
Electrical
Product Subgroup:
Box Covers
Product Type:
Pre-Assembled Form 7 Conduit Body, Cover & Gasket
Product Finish:
Zinc Plated with Epoxy Powder Coat
Product Details:
Pre-Assembled Form 7 Conduit Body, Cover & Gasket
Product Material:
Gray Iron

Thomas & Betts LR17CG-TB – Frequently Asked Questions

1) Will the Thomas & Betts LR17CG-TB fit a Crouse-Hinds or Appleton Form 7 conduit body already on the job?
Yes. T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton Form 7 bodies and covers, so the LR17CG-TB body or its cover can go onto existing Form 7 work from either of those brands. Match the hub size as well: this one is 1/2 inch.
2) Does the LR17CG-TB come with the cover and gasket, or do I order those separately?
Cover and gasket are included and already assembled to the body. It ships as a pre-assembled Form 7 conduit body, cover and gasket, so there is nothing else to buy to close the body up. You still supply your own conduit, locknuts or bushings as the run requires.
3) Is this conduit body OK for outdoor or damp locations?
The LR17CG-TB is gray iron with a zinc plate and epoxy powder coat, and it ships with the gasket already fitted between cover and body. That combination is what you use for wet and corrosive areas rather than a plain steel body with no gasket. The description calls it triple-layer protection including two epoxy coating layers.
4) What is an LR conduit body used for on a run?
An LR body makes a 90 degree bend in a conduit run with the cover opening on the right as you look at the back. Beyond turning the corner, it gives you a pull point for conductors, a mounting outlet for wiring devices or fixtures, and access for future changes without cutting pipe. The smooth interior keeps cable jacket and insulation from being cut during the pull.
5) Does this Form 7 body give more wire fill than a standard body?
The T&B Form 7 bodies are made with a flat back, which raises the cubic inch capacity compared with a rounded back of the same nominal size. Useful when you are at the fill limit or pulling larger conductors through the turn.
6) How much does the LR17CG-TB weigh and how many come in a case?
Each assembly weighs 1.2 lbs and the standard outer carton holds 5. Overall carton dimensions are 6.5 x 4.75 x 4.75 inches. Useful numbers if you are staging material by the floor or shipping to a jobsite trailer.
7) What is the exact part number to order this T&B conduit body under?
Order it as Thomas & Betts LR17CG-TB. The CG in the number is what tells you the cover and gasket come with it rather than the bare body.
How fast can I get the Thomas & Betts LR17CG-TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts LR17CG-TB come with a warranty?
Absolutely. The Thomas & Betts LR17CG-TB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts LR17CG-TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts LR17CG-TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!