Thomas & Betts TB67CG-TB Pre-A...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$700.26
Thomas & Betts TB67CG-TB Pre-Assembled Form 7 Conduit Body, Cover & Gasket

Thomas & Betts TB67CG-TB Pre-Assembled Form 7 Conduit Body, Cover & Gasket

(No reviews yet) Write a Review

Model: TB67CG-TB
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$700.26
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Pre-Assembled Form 7 Conduit Body, Cover & Gasket

  • Features

    • Triple-layer protection...including two layers of epoxy coating which stops corrosion in its tracks.
    • Bodies are designed with a flat back, allowing more cubic inch capacity.
    • T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton's Form 7 bodies and covers.
    • Conduit bodies make 90 degree bends in conduit runs, act as mounting outlets for wiring devices and lighting fixtures and to provide access to conductors for maintenance and future system changes.
    • Eliminates rough internal surfaces that can cut into cable jacket, insulation and conductors during pulling and also reduces installation time and risk of installer strain.


TB67CG-TB - spec sheet

Manufacturer Resources

Product Specs

Form:
7
Hub Size:
2 Inch
Outer Dimensions Inches :
14.75x14.75x5.25
Outer Quantity:
2
Product Group:
Electrical Boxes
Standard:
UL E2969
Unspsc:
39131708 Electrical conduit fitting body
Weight Uom:
7 lbs. Each
Department:
Electrical
Product Subgroup:
Box Covers
Product Type:
Pre-Assembled Form 7 Conduit Body, Cover & Gasket
Product Finish:
Zinc Plated with Epoxy Powder Coat
Product Details:
Pre-Assembled Form 7 Conduit Body, Cover & Gasket
Product Material:
Gray Iron

Thomas & Betts TB67CG-TB – Frequently Asked Questions

1) Will a Thomas & Betts Form 7 conduit body work with Crouse-Hinds or Appleton Form 7 covers?
Yes. T&B Form 7 bodies and covers are interchangeable with Crouse-Hinds and Appleton Form 7 bodies and covers, so the TB67CG-TB can go onto an existing Form 7 run or take a cover you already have on the shelf. Form is the dimensional standard here, so match Form 7 to Form 7 and the hub size, not the brand.
2) Is the TB67CG-TB suitable for a wet or corrosive outdoor location?
The body is gray iron, zinc plated and then epoxy powder coated, and it ships pre-assembled with its cover and gasket. That is triple-layer protection with two epoxy layers over the plating, aimed at stopping corrosion, and the gasket seals the cover joint. It is the build you'd specify for damp, washdown, or chemically aggressive areas rather than a bare malleable iron body.
3) Do I need to order the cover and gasket separately for the TB67CG-TB?
No. It comes pre-assembled as body, cover and gasket in one part number, TB67CG-TB. You still supply conduit, sealing compound if your installation calls for it, and any mounting hardware for the wall or strut.
4) Does a Form 7 conduit body give more wire pulling room than a standard body?
Yes. The bodies are built with a flat back, which increases cubic inch capacity, and the interior is smooth so the cable jacket, insulation and conductors are not cut during the pull. Form 7 is the larger-capacity form, which is why it gets used at 2 inch conduit where pulling tension and bend radius matter.
5) What can I use a conduit body like this for besides turning a corner?
Three jobs: making 90 degree bends in a conduit run, acting as a mounting outlet for wiring devices and lighting fixtures, and giving access to conductors for maintenance or future changes. On MRO work that last one is the usual reason to put one in even where the run is straight.
6) How many come in a case of TB67CG-TB, and what is the shipping carton size?
Outer quantity is 2 per carton, and the outer carton measures 14.75 x 14.75 x 5.25 inches. Useful if you are staging a job and need to know how the pallet or the van packs out.
How fast can I get the Thomas & Betts TB67CG-TB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts TB67CG-TB come with a warranty?
Absolutely. The Thomas & Betts TB67CG-TB is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts TB67CG-TB?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts TB67CG-TB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!