Precision Hardware Inc (PHI) 2303 Series - Key Retracts Latchbolt, Mortise Exit Device

Precision Mortise 23 Series - Handed

Features

Doors – Doors – For all types of single and double door applications. Available for 1-3/4” thick, up to 4-0” wide opening. Furnished standard for 1-3/4” thick, 3’-0” wide opening.

Device – Covers ANSI A115.2 (Type 161), A115.18 cylinder lock and A115.1 (Type 86) Mortise Lock preparation. Double

Cylinder – Handed, “10” Function available. Requires one rim type
cylinder and one 1-1/4” long mortise type cylinder, not furnished standard.

Base Material – The Cover, Touchbar, Device Channel, Lock/Hinge Side Filler and End Cap are furnished of heavy wrought Brass, Bronze or Stainless Steel. US28 Devices are furnished with Aluminum, Brass, Bronze and Stainless Steel components.

Chassis – Investment Cast Steel, Zinc Dichromated.

Dogging – 1/4" turn hex key dogging standard. NOT available on Fire Exit Hardware.

Touchbar Height – 39-15/16" from floor standard.

Handed – Specify hand when ordering as RHRB or LHRB. Touchbar Assembly, Mortise Lock and Trim may be reversed in the field. For reversibility of complete device, mortise strike is required for the other hand.

UL Listed – Panic and Fire Exit Hardware. For FIRE EXIT HARDWARE

ANSI/BHMA – Devices are BHMA certified for ANSI 156.3, Grade 1.

Finishes –
605 606 612 613
625 626W 628 630

Cylinders – Mortise type, not furnished standard.

Retrofit Applications – The 2300 and FL2300 Series Devices are designed to retrofit into other manufacturers’ mounting hole locations. 1700 Series Pull Trim and 4900 Series Lever Trim may also be factory set for these applications by specifying prefix “R” (e.g. 2308 R4908A). Consult factory for details.

Exit Series – Handed Fits doors machined per ANSI A115.1 (Type 86) Mortise Lock preparation.

Backset – 2-3/4".

Case – Wrought Steel, Zinc Dichromate finish.

Lock Front Plate – 8" x 1-1/4" Bronze, Brass or Stainless Steel, pivots
for beveled or square edged doors.

Latchbolt – Stainless Steel, Deadlocking, 3/4" throw, anti-friction.

Guardbolt – Stainless Steel, sliding type.

Finishes – LOCK FRONT PLATE and STRIKE 605, 606, 612, 613, 622, 625, 630, 690. 630 furnished for 626 and 628 locks.

Strikes – No. S982, handed curved lip strike furnished standard.

Lock No.
• M303: 01, 02 & 03 functions.
• M308: 05, 08, 14 & 15 functions.
• M310: 10 function.

Precision 2000 Sell Sheet

Precision 2000 Series Catalog

Precision 2000 FAQ