Protector 60 kW Standby Generator
Features
- Connected to your home's existing liquid propane or natural gas fuel supply, it kicks in automatically within seconds of determining power loss
- 5-Year limited warranty
- 60 kW Standby Generator
- Mobile Link Connectivity: Standard with all Protector Series generators. Mobile Link allows you to monitor the status of your generator from anywhere in the world using a smartphone, tablet or PC
- Single-phase, 120/240 V
- Standard aluminum, all-weather enclosure provides corrosion resistance to prolong the life of your generator and is recommended for salt-air, coastal locations
- True Power Technology delivers power quality with less than 5 percent total harmonic distortion for clean, smooth operation of sensitive electronics and appliances
- Evolution Controller features a multilingual, two-line LCD text display with color-coded, backlit buttons equipped with an external viewing window for quick status check of the generator
- Thanks to Quiet-Test, your Protector generator runs its weekly self-test at a lower 1800 RPM, consuming less fuel and giving both the engine and alternator a longer life
- Consumer-friendly customer care hours to answer calls about the product
Manufacturer Resources
Product Specs
- Assembled Weight:
- 1328.000000 lbs
- Contains Chemicals That Cause Birth Defects Calif Prop65 :
- No
- Country Of Origin:
- United States
- Manufacturer Warranty:
- 5 year limited
- Restrictions:
- Yes
- Department:
- Electrical
- Product Group:
- Power Equipment
- Product Subgroup:
- Standby Generator
Generac RG06024ANAX – Frequently Asked Questions
1) Is the Generac Protector RG06024ANAX 60 kW generator single-phase or three-phase?
Single-phase, 120/240 V. That is the only configuration this Protector 60 kW unit is built in, so if your building service is three-phase you need a different Protector model rather than this one. For most residential and light commercial single-phase services, 120/240 V drops straight in.
2) What fuel does the Generac RG06024ANAX Protector 60 kW run on?
It ties into an existing liquid propane or natural gas supply. There is no diesel or gasoline option on this unit, and no on-site fuel tank to fill, so the gas line and its capacity are part of the install scope. Once connected, the generator starts on its own within seconds of a power loss.
3) How much does the Generac Protector 60 kW standby generator weigh, and what does that mean for the pad?
Assembled weight is 1,328 lbs. That is a set-and-crane item, not a two-person lift, so plan on a concrete pad or approved composite base rated for it and equipment to place the unit. Get the pad poured and cured before the delivery date.
4) Will a 60 kW Generac Protector generator run sensitive electronics and elevator or IT loads cleanly?
Output is held to less than 5 percent total harmonic distortion under Generac's True Power Technology, which is the figure that matters for electronics, VFDs, and modern appliance boards. Under 5 percent THD is the common threshold specified for sensitive equipment.
5) Is the Generac RG06024ANAX enclosure suitable for a coastal or salt-air site?
Yes. The standard enclosure on this Protector unit is aluminum and all-weather, and Generac specifically recommends it for salt-air and coastal locations because aluminum resists the corrosion that eats steel enclosures near the ocean. No upgraded enclosure needs to be specified for a coastal install.
6) Can a property manager monitor a Generac Protector generator remotely across multiple buildings?
Mobile Link connectivity is standard on the Protector Series, including the 60 kW RG06024ANAX. Status is readable from a phone, tablet, or PC from anywhere, which is how a manager covering several sites catches a failed weekly self-test without driving to the property. On the unit itself, the Evolution Controller shows status on a two-line multilingual LCD with backlit buttons, readable through an external viewing window without opening the enclosure.
7) How loud is the weekly exercise cycle on a Generac Protector standby generator?
The weekly self-test runs at a reduced 1800 RPM under Quiet-Test rather than full speed, so it is quieter and burns less fuel each week. That matters on a multi-family or hospitality site where the exercise cycle is otherwise a recurring complaint from residents.
8) What part number do I quote for the Generac 60 kW Protector, and where is it made?
The manufacturer part number is RG06024ANAX, a Protector Series 60 kW single-phase 120/240 V unit built in the United States. The unit also carries no California Prop 65 birth-defect chemical declaration. Shipping restrictions do apply to this item.
How fast can I get the Generac RG06024ANAX delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Generac RG06024ANAX come with a warranty?
Absolutely. The Generac RG06024ANAX is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Generac RG06024ANAX?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Generac RG06024ANAX from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.