Leviton 2592 Momentary Pushbut...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$394.77
Leviton 2592 Push button switch, single pole, momentary, 3A-125V AC, 1.5A-277VAC; black button, black cover; With 6 inch leads 18AWG AWM TEW 105C 600V, free ends stripped 1/2 inch.

Leviton 2592 Momentary Pushbutton Switch, Single-Pole, Black

(No reviews yet) Write a Review

Model: 2592

In Stock (leaves warehouse same day if ordered before 3pm ET)

$394.77
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Leviton 2592 Momentary Pushbutton Switch, Single-Pole, Black

The Leviton 2592 is a single-pole, momentary pushbutton switch built for control and signaling applications where quick, reliable actuation is required. It carries electrical ratings of 3A-125V AC and 1.5A-277VAC, and features a black button with a matching black cover for a clean, low-profile appearance on any panel. The switch ships pre-wired with 6 inch leads of 18AWG AWM TEW 105C 600V wire, with free ends stripped 1/2 inch for fast, tool-ready termination.

Key Features

  • Momentary Action: Single-pole, momentary contact operation for control, signaling, and interlock circuits.
  • Electrical Ratings: Rated 3A-125V AC and 1.5A-277VAC for use across standard low-voltage control circuits.
  • Black Button & Cover: Black actuator button paired with a black cover for a consistent, professional panel finish.
  • Pre-Wired Leads: Factory-installed 6 inch leads using 18AWG AWM TEW 105C 600V wire for direct integration into control wiring.
  • Stripped Free Ends: Lead ends are pre-stripped 1/2 inch, reducing prep time and speeding up termination in the field or on the bench.
  • Single-Pole Configuration: Simple single-pole design suited to dedicated momentary control functions.

Technical Specifications

  • Product Type: Pushbutton
  • Pole Configuration: Single Pole
  • Switch Action: Momentary
  • Voltage/Current Rating: 3A-125V AC; 1.5A-277VAC
  • Button Color: Black
  • Cover Color: Black
  • Lead Wire: 6 inch, 18AWG AWM TEW 105C 600V
  • Lead End Preparation: Free ends stripped 1/2 inch

Typical Applications

  • Control Panel and Enclosure Pushbutton Stations
  • Momentary Start/Stop and Signaling Circuits
  • Industrial and Commercial Equipment Control
  • Panel-Mounted Interlock and Reset Functions
  • Renovation and New Construction Wiring Device Installations

Why Leviton?

Leviton wiring devices are engineered for consistent, dependable performance in demanding electrical and control applications. The 2592 pushbutton switch combines clearly defined electrical ratings, a durable black button and cover, and pre-terminated 18AWG AWM TEW 105C 600V leads with stripped free ends, giving installers a ready-to-wire momentary switch for professional control panel and equipment work.

Manufacturer Resources

Technical Information

Product Specs

Department:
Electrical
Product Group:
Motor Control & Automation
Product Subgroup:
Push Buttons & Pilot Devices
Product Type:
Pushbutton

Leviton 2592 – Frequently Asked Questions

1) Is the Leviton 2592 pushbutton momentary or maintained?
Momentary. The Leviton 2592 is a single-pole momentary-contact pushbutton, so the circuit is made only while the button is held and drops out the moment you release it. That is what you want for start/stop stations, signaling, reset and interlock functions. If you need the contact to stay made after you let go, a momentary device is the wrong choice and you want a maintained-contact switch instead.
2) What voltage and amp load can a Leviton 2592 pushbutton switch handle?
The 2592 is rated 3A at 125V AC and 1.5A at 277V AC. That is a control-circuit rating, not a load-switching rating, so it is sized for pilot duty: coils, relays, signal and interlock circuits. Do not put a motor, a lighting branch circuit or anything drawing more than 3 amps at 125 volts through it.
3) Does the Leviton 2592 pushbutton come with wire leads or screw terminals?
It comes pre-wired. The 2592 ships with factory-installed 6 inch leads of 18AWG AWM TEW 105C 600V wire, and the free ends are already stripped 1/2 inch. There are no screw terminals to land on, so plan to splice into your control wiring with wire nuts, ferrules or a terminal block. The 600V insulation rating and 105C temperature rating let it run inside a panel alongside line-voltage conductors.
4) Are the 6 inch leads on the Leviton 2592 long enough to reach my terminal block?
Six inches of 18AWG is what you get, measured from the switch body. Inside a small pushbutton station or a shallow enclosure that reaches fine. Across a larger panel it will not, and since the leads are factory-attached you cannot swap them, so plan on splicing an extension in 18AWG or larger and keeping the joint in an accessible box or wireway.
5) Is the Leviton 2592 a single-pole or double-pole pushbutton?
Single-pole. The 2592 switches one circuit, one set of contacts. If your sequence needs two circuits actuated from one button, for example making one circuit while breaking another, a single-pole device will not do it and you need a multi-pole pushbutton.
6) What is the Leviton part number for the black momentary pushbutton switch?
Leviton 2592. That is the manufacturer part number to order against, and it identifies the single-pole momentary version with the black button and black cover and the 6 inch pre-stripped leads. Leviton's pushbutton line uses adjacent numbers for other actions and colors, so quote the 2592 exactly rather than a nearby number.
7) What color is the Leviton 2592 button and cover?
Black on black. The 2592 has a black actuator button with a matching black cover, which keeps a bank of them uniform across a panel face. If your station uses color to separate functions (red for stop, green for start), the 2592 will not give you that distinction on its own and you will want to label the station instead.
How fast can I get the Leviton 2592 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Leviton 2592 come with a warranty?
Absolutely. The Leviton 2592 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Leviton 2592?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Leviton 2592 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!