You may also like
IDEAL Industries 35-203 Quick-Rotating Screwdriver, 3/16" x 6", #2 Phillips
Model: IDL-35-203
Quick-Rotating Screwdriver, 3/16" x 6", #2 Phillips
Features
Nickel-chrome plating for corrosion resistance
Vapor-blasted tip prevents plate chipping
Tough, chrome vanadium steel shank
Cushioned...
Ideal Industries
$69.69
$14.17
Quick-Rotating Screwdriver, 3/16" x 6"
Features
- Cross-ground tip provides precise and secure fit in screw slot
- One-handed crank action for quick and easy use
- Cushioned rubber grip
- Vapor-blasted tip prevents plate chipping
- Nickel-chrome plating for corrosion resistance
- Ideal for threading screws in switches, fixtures and anchors
- Tough, chrome vanadium steel shank
Manufacturer Resources
Product Specs
- Product Group:
- Hand Tools
- Department:
- Electrical
- Product Subgroup:
- Screwdrivers & Drivers
- Product Type:
- Screwdriver
Ideal Industries 35-200 – Frequently Asked Questions
1) What tip size and blade length does the IDEAL 35-200 screwdriver have?
The IDEAL 35-200 is a 3/16 inch slotted tip on a 6 inch shank. That combination suits the small slotted screws on switches, receptacles and fixture hardware rather than heavy fastening work.
2) What does the quick-rotating action on the IDEAL 35-200 actually do for an electrician?
It is a one-handed crank action driver. You hold the handle and crank the shank to spin screws in continuously, so you can start and run a device screw while your other hand holds the switch or plate in the box. It is built for threading screws in switches, fixtures and anchors, not for final high-torque tightening.
3) Is this driver insulated for live electrical work?
Treat the 35-200 as a standard hand driver, not an insulated one. What it carries is a cushioned rubber grip for comfort and a plated chrome vanadium shank; no voltage rating is part of the tool. For work on energized conductors, specify a driver sold expressly as a 1000V insulated screwdriver.
4) Will this screwdriver chip the finish on a cover plate?
The 35-200 has a vapor-blasted tip specifically to prevent plate chipping, and the tip is cross-ground so it seats securely in the screw slot instead of camming out onto the plate face. That matters on painted or finished wall plates where a slipped blade leaves a visible mark.
5) What is the manufacturer part number to order this IDEAL quick-rotating screwdriver?
Order it as IDEAL Industries 35-200. That single part number covers the 3/16 inch by 6 inch quick-rotating screwdriver; there are no finish or size options to specify.
6) Is the IDEAL 35-200 screwdriver shank hardened, and will it rust in a service van or damp panel room?
The shank is chrome vanadium steel with nickel-chrome plating for corrosion resistance, so it holds up to tool bag and truck storage better than a bare steel blade. The grip is cushioned rubber.
How fast can I get the Ideal Industries 35-200 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries 35-200 come with a warranty?
Absolutely. The Ideal Industries 35-200 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries 35-200?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries 35-200 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.