Rack-A-Tiers 70226BR Double-En...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4.59
Rack-A-Tiers 70226BR Double-End Impact Drive Bit, Phillips/Square #2

Rack-A-Tiers 70226BR Double-End Impact Drive Bit, Phillips/Square #2

(No reviews yet) Write a Review

Model: 70226BR

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4.59
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Rack-A-Tiers 70226BR Double-End Impact Drive Bit, Phillips/Square #2

The Rack-A-Tiers 70226BR is a double-end impact drive bit built for electricians and installers who need a fast, reliable way to switch between two of the most common fastener drives on the job. With a Phillips #2 tip on one end and a Square (Robertson) #2 tip on the other, this bit lets you swap drive styles instantly without digging through a bag for a different bit or changing out your driver setup mid-task. Designed for use in impact drivers, the 70226BR is built to stand up to the high-torque, high-vibration demands of impact driving where standard bits can crack, strip, or snap under repeated use.

Key Features

  • Dual-Drive Design: Double-ended construction with a Phillips #2 tip on one side and a Square #2 tip on the other, giving you two of the most-used drive types in a single bit.
  • Impact-Rated Performance: Engineered as an impact drive bit for use with impact drivers, built to handle the torque spikes and repeated impacts common in daily electrical and construction work.
  • Time-Saving Convenience: Eliminates the need to carry separate Phillips and Square bits or stop to swap tips when a job calls for both fastener types.
  • Job-Ready Sizing: #2 tip size on both ends covers the most commonly specified fastener drive size for electrical boxes, panels, device mounting, and general trade work.
  • Rack-A-Tiers Reliability: Backed by Rack-A-Tiers, a brand trusted by electrical contractors for durable, purpose-built jobsite tools and accessories.

Technical Specifications

  • Drive Type: Phillips #2 / Square #2 (double-ended)
  • Bit Style: Impact Drive Bit

Typical Applications

  • Electrical Panel and Device Installation
  • Junction Box and Enclosure Assembly
  • General Electrical Contracting and Service Work
  • Residential and Commercial Wiring Projects
  • Any Job Requiring Quick Switching Between Phillips and Square Fasteners

Why Rack-A-Tiers?

Rack-A-Tiers designs its tools and accessories around the real-world needs of electrical professionals, and the 70226BR double-end impact drive bit is no exception. By combining two of the most frequently used drive types into a single impact-rated bit, Rack-A-Tiers helps crews stay efficient and organized on the job without sacrificing durability. It's a small accessory that solves a common frustration — carrying and swapping multiple bits — while standing up to the demands of impact driving day after day.

Manufacturer Resources

Product Specs

list_batch:
RAC-20260924
Product Type:
Driver Bit
Configuration:
Double-Ended, Phillips/Square #2
Department:
Electrical
Product Subgroup:
Drill & Driver Bits
Product Group:
Power Tools & Accessories

Rack-A-Tiers 70226BR – Frequently Asked Questions

1) What drive tips are on the Rack-A-Tiers 70226BR impact bit?
One end is a Phillips #2, the other a Square (Robertson) #2. It's a double-ended bit, so you flip it in the chuck instead of hunting for a second bit when a panel or device mixes both fastener drives. #2 is the size that covers most electrical box, panel, and device screws.
2) Can I use this double-ended bit in an impact driver, or is it only for a drill?
The 70226BR is built as an impact drive bit, intended for impact drivers and the torque spikes and repeated hammering that come with them. It will also turn screws in a standard drill/driver, but the reason to buy it is impact duty where a plain insert bit tends to crack or snap.
3) What is the difference between the Rack-A-Tiers 70226BR and running separate Milwaukee SHOCKWAVE Phillips and square bits?
The Rack-A-Tiers 70226BR is a single double-ended impact bit with a Phillips #2 tip on one end and a Square (Robertson) #2 tip on the other, so you flip the bit instead of swapping bits. The Milwaukee SHOCKWAVE Impact Duty Phillips #2 power bit (48-32-4802) and the Milwaukee SHOCKWAVE Impact Duty 2 inch square recess power bit each carry one drive type, so covering both fastener styles means two bits in the driver rotation. All three are impact-rated bits for use in impact drivers.
4) I need extra reach into a deep panel enclosure - is the 70226BR the right bit?
For recessed or deep work, the Milwaukee 48-32-4802 SHOCKWAVE Impact Duty Phillips #2 power bit is a 6 inch length bit, which gets the tip past obstructions a short bit cannot reach. The Rack-A-Tiers 70226BR is a double-ended Phillips #2 / Square #2 impact bit intended for fast switching between the two common drive types rather than extended reach, so it suits device and box work where the fastener is accessible.
5) Will a double-ended bit fit a magnetic bit holder, or do I need to chuck it directly?
A double-end bit has a drive tip on both ends rather than a hex shank with a single tip, so the end you are not using sits in the holder or chuck. Chuck it directly in the impact driver's 1/4 inch hex collet, or use a holder that grips the body. If you want something that drops into a magnetic holder and stays there, a single-ended power bit like the Milwaukee 48-32-4802 SHOCKWAVE Phillips #2 is the better pick.
6) Should I buy one double-ended Phillips/Square bit or separate single bits?
If your work swings between Phillips and square-drive fasteners on the same task, panels, junction boxes, device mounting, the 70226BR saves the bit change because both drives live on one bit. If you drive mostly one type all day, or want extra reach down inside an enclosure, go single-ended instead: the Milwaukee 48-32-4802 is a Phillips #2 power bit in a 6 inch length, and Milwaukee also offers a 2 inch square recess power bit in the SHOCKWAVE line.
7) If I only drive square-drive screws, is there a simpler alternative to the 70226BR?
Yes. If your fasteners are all square recess, the Milwaukee SHOCKWAVE Impact Duty 2 inch square recess power bit gives you that one drive type without the second tip you would not use. The Rack-A-Tiers 70226BR earns its place when a job mixes Phillips #2 and Square #2 fasteners, since both tips sit on the same bit.
8) Can I use the 70226BR in a bit holder or magnetic sleeve the way I use a standard power bit?
A double-ended bit such as the Rack-A-Tiers 70226BR seats one tip in the holder while the other faces out, so whichever drive you are not using occupies the shank position. Single-ended power bits like the Milwaukee 48-32-4802 SHOCKWAVE Impact Duty Phillips #2, 6 inch, present a dedicated shank end for the holder. That is the practical distinction to weigh if your setup relies on a magnetic sleeve or depth-setting holder.
9) What's the right part number to order for the Rack-A-Tiers Phillips/square impact bit?
Order Rack-A-Tiers 70226BR. That is the manufacturer part number for the double-end impact bit with Phillips #2 and Square #2 tips. There is a single configuration, so there is no tip size or length option to specify.
10) Is a square #2 tip the same as a Robertson #2?
Yes. Square drive and Robertson are the same recess, and the 70226BR carries a Square (Robertson) #2 on one end. That is the drive on most Canadian-market electrical device and box screws, with the Phillips #2 on the opposite end for everything else.
How fast can I get the Rack-A-Tiers 70226BR delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Rack-A-Tiers 70226BR come with a warranty?
Absolutely. The Rack-A-Tiers 70226BR is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Rack-A-Tiers 70226BR?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Rack-A-Tiers 70226BR from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!